Харвестер відкритої науки НАН України

Study of changes in the structural and chemical composition of periclase-carbonate refractories in the process of operation as the lining of oxygen converters

за авторством L. S. Molchanov, T. S. Holub
Опубліковано 2022

Analytical study of the characteristics of streams flowing from nozzles of compound-type construction

за авторством S. I. Semykin, T. S. Holub, L. S. Molchanov
Опубліковано 2022

Directions of development of production of small- size billets for long products

за авторством V. G. Gerasimenko, L. S. Molchanov
Опубліковано 2018

Studying the Possibility of Using Coherent Type Nozzles for Bof Blowing at the Gas Dynamic Simulation Stand

за авторством T. S. Golub, L. S. Molchanov, S. I. Semykin
Опубліковано 2023

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity

за авторством A. S. Lantukh, L. S. Molchanov, E. V. Sinegin
Опубліковано 2018

Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions

за авторством L. S. Molchanov, A. S. Lantukh, E. V. Sinegin
Опубліковано 2018

Assessment of the postcombustion process in the cavity of the working space of the oxygen converter based on assessment of the physical parameters of flue gases and flame

за авторством T. S. Holub, L. S. Molchanov, Ye. S. Kakushkin, P. H. Prokopenko
Опубліковано 2022

Technological analysis of the efficiency of operation of periclase-carbon refractories in low-capacity converters

за авторством A. H. Cherniatevych, L. S. Molchanov, T. S. Holub, S. I. Semykin
Опубліковано 2021

High temperature modeling of BOF bath blowing by using three-level oxygen lance

за авторством A. G. Chernjatevich, L. S. Molchanov, P. O. Jushkevich
Опубліковано 2017

Physical model of influence of CaO-FeO-SiO2 powder fraction on the heat transfer from torch

за авторством L. S. Molchanov, T. S. Golub, Ye. V. Synehin, S. I. Semykin
Опубліковано 2022

Evaluating the Effi ciency of Using Coherent-Type Nozzles for the Conditions of Additional Postcombustion of CO to CO2 in the Wor king Space of the Oxygen Converter

за авторством T. S. Golub, L. S. Molchanov, S. І. Semykin, V. V. Vakulchuk
Опубліковано 2024

Estimation of gas behaviour furing its desulphuration with magnesium

за авторством L. S. Molchanov, A. S. Vergun, A. F. Shevchenko, V. G. Kisljakov
Опубліковано 2016

Impact of technological factors on the intensity of wear of BOF lining

за авторством A. S. Zaspenko, K. G. Nizjaev, A. N. Stojanov, L. S. Molchanov
Опубліковано 2013

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance

за авторством A. G. Chernjatevich, L. S. Molchanov, P. O. Jushkevich, M. K. Chubin
Опубліковано 2017

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases

за авторством A. G. Chernjatevich, L. S. Molchanov, P. O. Jushkevich, V. V. Vakulchuk
Опубліковано 2018

Features of application of the lining of teeming ladles

за авторством V. G. Gerasimenko, E. V. Sinegin, L. S. Molchanov, Ja. Pererva, A. S. Lantukh
Опубліковано 2018

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases

за авторством A. G. Chernjatevich, L. S. Molchanov, V. V. Vakulchuk, P. O. Jushkevich, A. S. Kobeljatskij
Опубліковано 2019

Complex desulfurization and degassing of hot metal with magnesium

за авторством A. S. Vergun, A. F. Shevchenko, V. G. Kisljakov, L. S. Molchanov, B. V. Dvoskin
Опубліковано 2018

Selection of basic components of slag-forming mixture for single-step removal of impurities from cast iron

за авторством V. H. Kysliakov, D. M. Tohobytska, L. S. Molchanov, O. L. Rudenko, M. V. Pushkarenko
Опубліковано 2022

Schematic diagram of the model of end-to-end technology for the production of competitive metal products by Ukrainian enterprises operating in unstable raw materials and energy con...

за авторством O. S. Verhun, L. S. Molchanov, V. H. Kysliakov, D. M. Tohobytska, Yu. S. Semenov, O. S. Nesterov
Опубліковано 2021