Influence of modification on the characteristics of reinforcing steels intended for reinforced concrete structures

за авторством S. O. Polishko
Опубліковано 2023

Assessment of economic effectiveness of electroslag technologies, using consumable electrode and liquid metal

за авторством H. P. Stovpchenko, H. O. Polishko, D. V. Kolomiiets, L. B. Medovar
Опубліковано 2022

Main directions of welding research and development performed by research centers and leading welding equipment manufacturers

за авторством O. K. Makovetska, S. V. Pustovoit, V. S. Petruk, N. S. Onyshchenko, H. O. Polishko
Опубліковано 2022

Modern rail steels and solutions ESR (Review). Information 1. Operating conditions and defects observed

за авторством L. B. Medovar, H. P. Stovpchenko, H. O. Polishko, Ye. O. Pedchenko, V. A. Zaitsev
Опубліковано 2018

Mass transfer in electroslag processes with consumable electrode and liquid metal

за авторством G. P. Stovpchenko, A. V. Sybir, G. O. Polishko, L. B. Medovar, Ya. V. Gusiev
Опубліковано 2020

Tape Casting of anode and electrolyte layers for solid oxide fuel cells

за авторством S. E. Ivanchenko, I. O. Polishko, D. I. Baranovskyi, Y. M. Brodnikovskyi, O. D. Vasylyev, A. V. Ragulya
Опубліковано 2018

Development of electroslag remelting slag, tended to autodecomposition

за авторством H. P. Stovpchenko, L. O. Lisova, L. B. Medovar, I. O. Honcharov, H. O. Polishko, V. S. Sudavtsova
Опубліковано 2016

Formation of the zone of joining the layers in a composite ingot, surfaced by the electroslag process with liquid metal, for power turbine rotors

за авторством H. O. Polishko, H. P. Stovpchenko, V. A. Kostin, Yu. Tunik, L. O. Lisova, L. B. Medovar
Опубліковано 2022

Effect of deofrmation of molten metal drops on their movement and heating in a slag layer at ESR

за авторством I. V. Krivtsun, V. M. Sydorets, A. V. Sybir, H. P. Stovpchenko, H. O. Polishko, L. B. Medovar
Опубліковано 2021

Innovative Solutions for Manufacturing High-Quality Rails in Ukraine

за авторством L. B. Medovar, H. P. Stovpchenko, H. O. Polishko, A. V. Sybir, D. V. Kolomiiets, Yu. V. Kostetskyi
Опубліковано 2019

The effect of fuel gas mixtures and air flow rates on electrical properties of solid oxide fuel cell

за авторством N. O. Lysunenko, Ye. M. Brodnikovskyi, V. I. Chedryk, D. M. Brodnikovskyi, I. O. Polishko, O. D. Vasyliev
Опубліковано 2021

The influence of porosity on mechanical strength of 3,5YSZ ceramic carcass for anode solid oxide fuel cell application

за авторством I. O. Polishko, Ye. M. Brodnikovskyi, D. M. Brodnikovskyi, V. Y. Podhurska, B. D. Vasyliv, O. D. Vasyliev
Опубліковано 2017

The influence of the fuel cell working environment on the structure and physico- mechanical characteristics of ZrO2–Y2O3–NiO ceramics

за авторством B. D. Vasyliv, Ya. Podhurska, O. P. Ostash, I. O. Polishko, Ye. M. Brodnikovskyi, S. E. Ivanchenko, O. D. Vasyliev
Опубліковано 2020

Mechanical behavior and electrical conductivity of zinc-oxideceramics

за авторством Ye. M. Ostroverkh, I. O. Polishko, D. M. Brodnikovskyi, L. L. Kovalenko, A. V. Sameliuk, O. D. Vasyliev, A. S. Ostroverkh
Опубліковано 2020

Zirconium dioxide stabilized with yttrium oxide and cerium oxide (8Ce2YSZ) for solid oxide fuel cell anode and electrolyzers application

за авторством I. O. Polishko, Ye. M. Brodnikovskyi, D. M. Brodnikovskyi, N. O. Lysunenko, R. V. Horda, O. V. Dudnik, Yu. Smyrnova-Zamkova, I. O. Marek, O. M. Myslyvchenko, ta in.
Опубліковано 2022