Fulfillment of rough surface profile obtained by diamond-abrasive treatment, as one of the factors of its bearing capacity von V. I. Lavrinenko

Volltext

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency von V. I. Lavrinenko

Volltext

On the influence of the hydrogen index of technology liquids for performance characteristics diamond abrasive wheels von V. I. Lavrinenko

Volltext

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels von V. I. Lavrinenko

Volltext

To the analysis of the estimation of energy costs during diamond-abrasive processing by wheels from superhard materials von V. I. Lavrinenko

Volltext

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review) von V. I. Lavrinenko

Volltext

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of sup... von V. I. Lavrinenko

Volltext

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites von V. I. Lavrinenko

Volltext

SDiamond machining ceramics: influence of abrasive particle aspect of sludge von V. I. Lavrinenko

Volltext

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites von V. I. Lavrinenko

Volltext

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review von V. I. Lavrinenko

Volltext

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding von V. I. Lavrinenko

Volltext

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition) von V. I. Lavrinenko

Volltext

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component) von V. I. Lavrinenko

Volltext

The process of abrasive machining as a friction interaction between dissimilar materials von V. I. Lavrinenko, Yu. Solod

Volltext

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance von V. I. Lavrinenko, Yu. Solod

Volltext

Determining the conditions for achieving the plastic mode of diamond grinding of ceramic materials from the standpoint of estimating energy costs during processing von V. I. Lavrinenko, V. Y. Solod

Volltext

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness von O. O. Pasichnyi, V. I. Lavrinenko

Volltext

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool von V. V. Smokvyna, V. I. Lavrinenko, H. D. Ilnytska

Volltext

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks von H. A. Petasiuk, V. I. Lavrinenko, Yu. V. Syrota

Volltext