Fulfillment of rough surface profile obtained by diamond-abrasive treatment, as one of the factors of its bearing capacity за авторством V. I. Lavrinenko

Отримати повний текст

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency за авторством V. I. Lavrinenko

Отримати повний текст

On the influence of the hydrogen index of technology liquids for performance characteristics diamond abrasive wheels за авторством V. I. Lavrinenko

Отримати повний текст

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels за авторством V. I. Lavrinenko

Отримати повний текст

To the analysis of the estimation of energy costs during diamond-abrasive processing by wheels from superhard materials за авторством V. I. Lavrinenko

Отримати повний текст

CVD diamonds in diamond tools: features and properties, features of processing and application in modern diamond tools (Review) за авторством V. I. Lavrinenko

Отримати повний текст

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 2. Water freezing in porous space of sup... за авторством V. I. Lavrinenko

Отримати повний текст

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites за авторством V. I. Lavrinenko

Отримати повний текст

SDiamond machining ceramics: influence of abrasive particle aspect of sludge за авторством V. I. Lavrinenko

Отримати повний текст

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites за авторством V. I. Lavrinenko

Отримати повний текст

Current advances in the development of abrasive tools and investigation of diamond abrasive machining processes (materials science approach). Review за авторством V. I. Lavrinenko

Отримати повний текст

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding за авторством V. I. Lavrinenko

Отримати повний текст

Structurally changed surface layers of contact surfaces of a SHM wheel and a workpiece as a factor of increasing their wear resistances (variation of elemental composition) за авторством V. I. Lavrinenko

Отримати повний текст

Structurally strengthened surface layers of contact surfaces of a SHM wheel and a workpiece machined as a factor of increasing their wear resistance (a film component) за авторством V. I. Lavrinenko

Отримати повний текст

The process of abrasive machining as a friction interaction between dissimilar materials за авторством V. I. Lavrinenko, Yu. Solod

Отримати повний текст

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance за авторством V. I. Lavrinenko, Yu. Solod

Отримати повний текст

Determining the conditions for achieving the plastic mode of diamond grinding of ceramic materials from the standpoint of estimating energy costs during processing за авторством V. I. Lavrinenko, V. Y. Solod

Отримати повний текст

The influence of circumferential waviness of the diamond wheel working surface on the machined surface roughness за авторством O. O. Pasichnyi, V. I. Lavrinenko

Отримати повний текст

The defectiveness of synthetic diamond grains of low strength – a disadvantage and a positive in the case of their use in a grinding tool за авторством V. V. Smokvyna, V. I. Lavrinenko, H. D. Ilnytska

Отримати повний текст

Quantitative studies of geometric shape-similarity of projection of grains of grinding powders of synthetic diamond for wide range of marks за авторством H. A. Petasiuk, V. I. Lavrinenko, Yu. V. Syrota

Отримати повний текст