Buchumschlag

BRUSHLESS VALVE ELECTRIC DRIVE WITH MINIMUM EQUIPMENT EXCESS FOR AUTONOMOUS FLOATING VEHICLE

Purpose. Development of a brushless valve electric drive with a minimum apparatus excess for an autonomous floating vehicle. Methodology. The construction of models of an automated electric drive with a contactless DC motor and the subsequent technical implementation of such automated electric drive...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Volyanskaya, Ya. B., Volyanskiy, S. M., Onischenko, O. A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2017
Schlagworte:	automated electric drive autonomous floating vehicle DC brushless motor Hall sensor coordinate transformations encoder 62-83 629.584
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2017.4.05
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Design and evaluation of a hybrid offshore wave energy converter and floating photovoltaic system for the region of Oran, Algeria
von: Araria, R., et al.
Veröffentlicht: (2024)

DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)

Mathematical modeling of electromechanical processes in a brushless DC motor
von: Tkachuk, V. I., et al.
Veröffentlicht: (2014)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

USING AN UNINTERRUPTED POWER SUPPLY TO REDUCE THE OPERATING COSTS OF AN AUTONOMOUS ELECTRIC GENERATOR
von: Kovalenko , M., et al.
Veröffentlicht: (2025)

Autonomous digital seismic stations SV
von: Gryn, D. M., et al.
Veröffentlicht: (2019)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

MATHEMATICAL FIELD MODELS OF BRUSHLESS DC MOTORS WITH PERMANENT MAGNETS AND THEIR COMPARATIVE ANALYSIS
von: Matyuschenko, A. V.
Veröffentlicht: (2015)

Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)

Some features of autonomous work of wind and solar power stations
von: Kuznietsov, M.
Veröffentlicht: (2016)

INVESTIGATION OF THE INFLUENCE OF THE PARAMETERS OF THE WIND FLOW ON THE CHOICE OF THE CHARACTERISTICS OF THE AUTONOMOUS WIND TURBINE
von: Gonsharenko, Yu., et al.
Veröffentlicht: (2022)

ANALYSIS OF THERMAL STATE OF TRACTION BRUSHLESS PERMANENT MAGNET MOTOR FOR MINE ELECTRIC LOCOMOTIVE
von: Matyuschenko, A. V.
Veröffentlicht: (2016)

ECONOMIC ASPECTS OF REALIZATION OF AUTONOMOUS CHARGER STATIONS OF ELECTRIC POWER BASED ON PHOTOELECTRIC BATTERIES
von: Budko, V. I., et al.
Veröffentlicht: (2018)

ECONOMIC ASPECTS OF REALIZATION OF AUTONOMOUS CHARGER STATIONS OF ELECTRIC VEHICLES ON THE BASIS OF WIND TURBINE
von: Budko, V., et al.
Veröffentlicht: (2019)

Exploration and extraction of deep minerals without mines and quarries with the help of nuclear autonomous thermal drills-geoprodes
von: Vashchenko, Volodymyr M., et al.
Veröffentlicht: (2023)

Classification of BPG-Based Lossy Compressed Noisy Images
von: Proskura, Galina, et al.
Veröffentlicht: (2024)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

USE OF WIND TURBINE FOR PRODUCE HYDROGEN IN THE COMPOSITION OF AUTONOMOUS FILLING STATIONS OF ELECTRIC VEHICLES ON FUEL CELLS
von: Budko, V., et al.
Veröffentlicht: (2019)

Super-twisting sliding mode control for brushless doubly fed reluctance generator based on wind energy conversion system
von: Oualah, O., et al.
Veröffentlicht: (2023)

Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
von: Oualah, O., et al.
Veröffentlicht: (2022)

Development of mathematical model of operation of autonomous charger station of electric vehicles from vind electric units
von: Budko, V.
Veröffentlicht: (2017)

Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
von: Merlin Suba, G., et al.
Veröffentlicht: (2022)

Thermo-economic analysis of the heat-pumping drying installation
von: Кузнецов, М. А.
Veröffentlicht: (2012)

Thermo-economic analysis of the heat-pumping drying installation
von: Кузнецов, М. А.
Veröffentlicht: (2012)

Lie algebras associated with quadratic forms and their applications to Ringel-Hall algebras
von: Kosakowska, Justyna
Veröffentlicht: (2018)

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)

Reconstruction of treatment facilities for wastewater treatment at "Antonov" State Enterprise
von: Bychkov, Sergii A., et al.
Veröffentlicht: (2021)

Determination of parameters of an autonomous source of a constant magnetic field for a portable electromagnetic-acoustic transducer
von: Bolyukh, V. F., et al.
Veröffentlicht: (2025)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
von: Galinovskiy, A. M.
Veröffentlicht: (2013)

COMPARATIVE TECHNO-ECONOMIC AND ENVIRONMENTAL ASSESSMENT OF “PV + DIESEL GENERATOR” AND “PV + GAS GENERATOR” SYSTEMS FOR AUTONOMOUS OPERATION OF A GRID-CONNECTED PV PLANT
von: Stepenko , V.
Veröffentlicht: (2025)

CONTROL OF VALVE ELECTRIC DRIVE COORDINATES OF AUTOMATED WELDING EQUIPMENT FEED MECHANISMS
von: Lebedev, V. A., et al.
Veröffentlicht: (2020)

EXPERIMENTAL STUDIES OF THE CHARACTERISTICS OF A PYROLYSIS BURNER FOR A THERMOE-LECTRIC POWER GENERATOR
von: Lobunets , Yu., et al.
Veröffentlicht: (2024)

A COMBINED SOURCE OF THERMAL AND ELECTRICAL ENERGY BASED ON A GAS GENERATOR BURNER AND A THERMOELECTRIC GENERATOR
von: Lobunets, Yu., et al.
Veröffentlicht: (2023)

On the nature of the Khmilnyk Minimum of gravity
von: Yentin, V.A., et al.
Veröffentlicht: (2025)

On finite groups with Hall normally embedded Schmidt subgroups
von: Kniahina, Viktoryia Nikolaevna, et al.
Veröffentlicht: (2018)

APPLICATION OF THEORY CHERK FOR DESCRIPTION OF IMPORTANT PARAMETERS OF THE CHARGING OF ELECTRIC MOBILS FROM RESTORED ENERGY SOURCES
von: Budko, V.
Veröffentlicht: (2017)

COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
von: Teriaiev, V., et al.
Veröffentlicht: (2020)

Experimental Study of the Model Compartment of the Low-Pressure Cylinder of K-320-240 Turbines of JSC "Turboatom"
von: Alyokhina, Svitlana V., et al.
Veröffentlicht: (2019)

Experimental Study of the Model Compartment of the Low-Pressure Cylinder of K-320-240 Turbines of JSC "Turboatom"
von: Alyokhina, Svitlana V., et al.
Veröffentlicht: (2019)