THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES

THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES

Introduction. Electrical insulation systems make up about 0.03 % of the traction electric machines (TEM) mass, but they are of exceptional importance and affect the design capabilities and manufacturing techniques of electric machines, ultimately - on their specific weight and overall dimensions, on...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Bezprozvannych, G. V., Roginskiy, A. V.
Format:	Artikel
Sprache:	English Ukrainian
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2017
Schlagworte:	traction electrical machines electrical insulation systems insulation resistance cumulative sum control chart manufacturing process stability 621.319
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2017.6.10
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

DIELECTRIC SPECTROSCOPY OF CASING THERMOSETTING COMPOSITE ELECTRICAL INSULATION SYSTEM OF INDUCTION TRACTION ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2018)

EFFECT OF A DIELECTRIC BARRIER ON THE ELECTRIC FIELD DISTRIBUTION IN HIGH-VOLTAGE COMPOSITE INSULATION OF ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2018)

EFFICIENCY OF APPLICATION OF SEMICONDUCTIVE COATINGS FOR REGULATION OF ELECTRIC FIELD IN HIGH-VOLTAGE INSULATION OF ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

THE TECHNOLOGICAL AND EXPLOITATIVE FACTORS OF LOCAL INCREASE OF ELECTRIC FIELD STRENGTH IN THE POWER CABLE OF COAXIAL DESIGN
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2016)

THE ABSORPTION CHARACTERISTICS OF THE PHASE AND ZONE PAPER-IMPREGNATED INSULATION OF POWER CABLE AT DIRECT VOLTAGE
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2015)

PROVIDING TECHNICAL PARAMETERS OF RESISTIVE CABLES OF THE HEATING FLOOR SYSTEM WITH PRESERVATION OF THERMAL RESISTANCE OF INSULATION
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2020)

INCREASE OF ENERGY EFFICIENCY OF TESTING OF TRACTION ELECTRIC MACHINES OF DIRECT AND PULSATING CURRENT
von: Afanasov, A. M.
Veröffentlicht: (2015)

EFFECT OF THE THICKNESS OF INSULATION OF PROTECTED WIRES OF HIGH-VOLTAGE OVERHEAD TRANSMISSION LINES TO THEIR CURRENT CARRYING CAPACITY
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2018)

Destruction of polymer insulation and threshold amplitudes of current pulses of different temporal shapes for electric wires and cables in the low- and high-current circuits of pulse power engineering, electrical engineering and electronic devices
von: Baranov, M.I., et al.
Veröffentlicht: (2021)

DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
von: Afanasov, A. M.
Veröffentlicht: (2012)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

CORRELATION BETWEEN ELECTRICAL AND MECHANICAL CHARACTERISTICS OF CABLES WITH RADIATION-MODIFIED INSULATION ON THE BASIS OF A HALOGEN-FREE POLYMER COMPOSITION
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2018)

CONTACT POTENTIAL DIFFERENCE AS A MEASURE OF POWER CABLE POLYMER INSULATION AGING
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2014)

ON THE NEED TO INCREASE THE RELIABILITY OF LINEAR INSULATORS FOR DISTRIBUTION NETWORKS 10-20 KV
von: Shumilov, Yu. N., et al.
Veröffentlicht: (2018)

Reasoning of additional diagnostic parameters for electric insulation diagnostics by absorption methods
von: Kyrylenko, V.M., et al.
Veröffentlicht: (2021)

SUBSTANTIATION AND GUARANTEEING OF TECHNOLOGICAL PARAMETERS OF TRIBOELECTRICAL METHOD OF MONITORING OF CABLES WITH POLYMER INSULATION
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2014)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

RELAXATIONS LOSSES IN POLYETHYLENE INSULATION OF COAXIAL CABLE STRUCTURE DURING AGING IN HIGH HUMIDITY CONDITIONS
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2016)

Estimation of electrical resistivity of conductive materials of random shapes
von: Gans, Š., et al.
Veröffentlicht: (2023)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

MODIFICATIONS OF DIODE RECTIFIER CIRCUITS FOR CONTINUOUS INSULATION MEASUREMENT IN LIVE AC IT NETWORKS
von: Olszowiec, P.
Veröffentlicht: (2016)

Synthesis of constructive-technological decisions of regulation of working capacitance of cables of industrial networks
von: Bezprozvannych, G.V., et al.
Veröffentlicht: (2021)

Traction electric drive based on fuel cell batteries and on-board inertial energy storage for multi unit train
von: Omelyanenko, V. I., et al.
Veröffentlicht: (2021)

ESTIMATION CRITERIA FOR DEGREE OF PAPER-IMPREGNATED INSULATED POWER CABLE AGEING
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2013)

Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
von: Larbi, B., et al.
Veröffentlicht: (2023)

TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

IDENTIFICATION OF TECHNOLOGICAL DEFECTS IN HIGH-VOLTAGE SOLID INSULATION OF ELECTRICAL INSULATION STRUCTURES ON THE CHARACTERISTICS OF PARTIAL DISCHARGES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)

Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)

INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE POWER CABLES WITH XLPE INSULATION
von: Shchebeniuk, L. A., et al.
Veröffentlicht: (2016)

RESEARCH ON THE STABILITY AND SIMULATION OF THE ELECTRICAL AND THERMAL PARTS OF A HYBRID PHOTOVOLTAIC THERMAL COLLECTOR
von: Bondarenko , D., et al.
Veröffentlicht: (2025)

ONLINE TECHNOLOGICAL MONITORING OF INSULATION DEFECTS IN ENAMELED WIRES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2017)

Dielectric parameters of phase and belt paper impregnated insulation of power cables
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2025)

IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
von: Pliugin, V. E., et al.
Veröffentlicht: (2019)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
von: Khlopenko, N. J.
Veröffentlicht: (2020)

Efficiency enhancement strategy implementation in hybrid electric vehicles using sliding mode control
von: Ibrar, A., et al.
Veröffentlicht: (2023)

COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
von: Teriaiev, V., et al.
Veröffentlicht: (2020)

Voltage regulation using three phase electric spring by fuzzy logic controller
von: Ikhe, A., et al.
Veröffentlicht: (2023)

Determination of individual values of four-element equivalent circuits elements parameters at technical diagnostics of insulation by absorption methods
von: Kyrylenko, V. M., et al.
Veröffentlicht: (2023)