COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE

COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE

Aim. This article is intended to develop a technique for monitoring the lining state of induction channel furnaces for melting oxygen-free copper by monitoring changes in the distribution of thermal fields in their lining and carrying out a comparative analysis of the developed technique with the ex...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	Zolotaryov, V. M., Shcherba, M. A., Belyanin, R. V., Mygushchenko, R. P., Kropachek, O. Yu.
Format:	Artikel
Sprache:	English
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2018
Schlagworte:	induction heating diagnostics and control interconnected electromagnetic and thermal processes thermal field distribution three-dimensional mathematical modeling finite element method 621.365.5
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2018.1.05
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING
von: Podoltsev, A. D., et al.
Veröffentlicht: (2018)

Comparative analysis of electrical and thermal control of the lining state of induction apparatus of copper wire manufacture
von: Zolotaryov, V.M., et al.
Veröffentlicht: (2018)

ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)

Research of dynamic characteristics for electric thermal storage
von: Khimenko, A.
Veröffentlicht: (2016)

ELECTROMECHANICAL TRANSIENT PROCESSES DURING SUPPLY VOLTAGE CHANGING IN THE SYSTEM OF POLYMER INSULATION COVERING OF THE CURRENT-CARRYING CORE OF ULTRA HIGH VOLTAGE CABLES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)

Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
von: Tretiak, O. V.
Veröffentlicht: (2018)

Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
von: Tretiak, O. V.
Veröffentlicht: (2018)

Penetration of non-uniform electromagnetic field into conducting body
von: Vasetsky, Yu. M.
Veröffentlicht: (2021)

Nano-mechanisms of connection in the solid phase of tungsten and tantalum in the manufacture of a neutron source target
von: Borts, B.V., et al.
Veröffentlicht: (2023)

Features of formation of crystallographic texture and properties in Ti-3Al-2.5V titanium alloy during tubes manufacture
von: Vakhrusheva, V.S., et al.
Veröffentlicht: (2019)

ANALYSIS OF WIND ENERGY CONVERSION SYSTEMS INTO HEAT
von: Golovko , V., et al.
Veröffentlicht: (2024)

Quality improvement of disassembly of multicomponent compounds using thermal action
von: Романов, Сергей Валерьевич, et al.
Veröffentlicht: (2014)

Quality improvement of disassembly of multicomponent compounds using thermal action
von: Романов, Сергей Валерьевич, et al.
Veröffentlicht: (2014)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

EFFECT OF THE THICKNESS OF INSULATION OF PROTECTED WIRES OF HIGH-VOLTAGE OVERHEAD TRANSMISSION LINES TO THEIR CURRENT CARRYING CAPACITY
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2018)

APPLICATION OF AN ARTIFICIAL NEURAL NETWORK FOR PREDICTING THE THERMAL STATE OF AN AIR-SOIL HEAT EXCHANGER
von: Basok , B., et al.
Veröffentlicht: (2025)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Algorithm of technical diagnostics of the complicated damage to the continued resource of the circulation pipeline of the nuclear power plant
von: Hrinchenko, H., et al.
Veröffentlicht: (2019)

INVESTIGATION OF BOREHOLE THERMOGRAMS OF THE BEREGOVSKY HYDROTHERMAL DEPOSIT
von: Barylo, A.
Veröffentlicht: (2017)

Research by direct methods of the base metal of main circulation pipeline of the power unit 3 of the south ukraine NPP after 200 thousand hours of operation
von: Vasilenko, R.L., et al.
Veröffentlicht: (2022)

Comparative characteristics of mechanical and adsorption properties of activated charcoals applied for adsorbers of NPP air discharge systems
von: Lepin, I.V., et al.
Veröffentlicht: (2020)

Assessment of the corrosion resistance of the main alternative materials for light water reactors tolerant fuel rod cladding
von: Zuyok, V., et al.
Veröffentlicht: (2022)

The results of the study of spatio-temporal changes in surface temperatures of Zaporizhya based on satellite data
von: Lischenko, Lyidmila, et al.
Veröffentlicht: (2021)

Physical-mechanical aspects of degradation of heat-echange tubes metal for steam-generators of the type PGW-1000
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)

Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
von: Milykh, V. I., et al.
Veröffentlicht: (2023)

DETERMINATION OF THERMOPHYSICAL PROPERTIES OF ROCKS USING WELLS
von: Morozov, Y.
Veröffentlicht: (2023)

DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BAGASSE THERMOCHEMICAL PROCESSING PART 2. ANALYSIS OF THE PYROLYSIS PROCESS IN A FIXED BED APPARATUS
von: Rohman , B., et al.
Veröffentlicht: (2024)

Mathematical Model of Interconnection Pattern for the Optical Computing Devices with Dy-namically Reconfigurable Architecture
von: Lipinskii, A. Y.
Veröffentlicht: (2013)

ANALYSIS OF THE DISTRICT HEATING SYSTEM WITH THE SEASONAL THERMAL ENERGY STORAGE SYSTEM TOGETHER WITH THE SYSTEM OF HYDROGEN PRODUCTION AND UTILISATION
von: Lysak, O.
Veröffentlicht: (2020)

Risk-informed method for predicting the operation life extension period of active safety systems at nuclear power plants
von: Skalozubov, V.I., et al.
Veröffentlicht: (2022)

Fractal model of estimating quality of cold worked fuel cladding tubes
von: Vakhrusheva, V.S., et al.
Veröffentlicht: (2021)

Burnup and radiation embrittlement of the U-Mo neutron source target
von: Borts, B.V., et al.
Veröffentlicht: (2022)

Thermophysical properties of fuel clading with various vacuum-arc coatings
von: Belous, V.A., et al.
Veröffentlicht: (2019)

Electrode processes in electrolysis of zirconium at production of plastic zirconium for nuclear energy
von: Mukhachev, A.P., et al.
Veröffentlicht: (2019)

Secondary raw materials of radioactive metals
von: Kolobov, G.A., et al.
Veröffentlicht: (2019)

The method for optimizing the iron content in the structural material Zr1%Nb for fuel element cladding of NPP nuclear reactors
von: Yefimov, O.V., et al.
Veröffentlicht: (2023)

Processing of experimental data of the process of refining nuclear material Zr1%Nb by electron-beam melting by means of interval analysis methods
von: Yefimov, A.V., et al.
Veröffentlicht: (2019)

Studying the changes in the mechanical properties of neutron-irradiated chromium-nickel steels using the “Shear Punch” method
von: Maksimkin, О.P., et al.
Veröffentlicht: (2019)

Leaching of uranium ores in the process of sodium sulphate electrolysis
von: Nefedov, V.G., et al.
Veröffentlicht: (2019)