Cover Image

POWERFUL GENERATORS OF HIGH-VOLTAGE PULSES WITH NANOSECOND FRONTS

Purpose. Purpose of the article is to show the possibility of joint efficient operation of semiconductor switches and spark arresters in high-powerful high-voltage generators for obtaining nanosecond and shorter pulse fronts on a high-voltage load. Methodology. The variants of generators of power hi...

Full description

Saved in:

Bibliographic Details
Date:	2018
Main Author:	Boyko, N. I.
Format:	Article
Language:	English
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2018
Subjects:	spark gap discharger generator switch transistor SOS-diode high-voltage pulse transformer pulse repetition frequency capacitive storage inductance load resistance 621.37
Online Access:	http://eie.khpi.edu.ua/article/view/2074-272X.2018.1.09
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

GENERATOR ON ARCADYEV-MARX SCHEME WITH PEAKING OF THE PULSE FRONT IN ITS CASCADES FOR FOOD DISINFECTING
by: Boyko, N. I., et al.
Published: (2017)

AIR ATMOSPHERIC-PRESSURE DISCHARGERS FOR OPERATION IN HIGH-FREQUENCY SWITCHING MODE.
by: Yevdoshenko, L. S.
Published: (2013)

THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
by: Gurin, A. G., et al.
Published: (2019)

Disinfectant treatment of liquids with high specific electrical conductivity by high-voltage nanosecond pulses with a subnanosecond front
by: Boiko, M. I., et al.
Published: (2025)

THE MICRO- AND NANOSECOND DISCHARGES IN GAS BUBBLES FOR WATER DISINFECTION AND PURIFICATION
by: Boyko, N. I., et al.
Published: (2019)

ENERGY EFFICIENCY OF THE DISINFECTION TREATMENT OF LIQUID FOODSTUFFS BY HIGH-VOLTAGE PULSE EFFECTS
by: Boyko, N. I., et al.
Published: (2018)

Influence of electroblasting breaker parameters on electric spark discharge characteristics in a circuit with an inductive-capacitive energy store
by: Dubovenko, K. V.
Published: (2012)

Numerical simulation of gap length influence on energy deposition in spark discharge
by: Korytchenko, K.V., et al.
Published: (2021)

The impact of parasitic capacitances on the accuracy of scale transformation of high-voltage dividers
by: Haran, Y. O., et al.
Published: (2025)

SYNTHESIS GAS REGENERATION ELECTROTECHNOLOGY USING VOLUME HIGH-VOLTAGE PULSED DISCHARGES: CORONA AND BARRIER ONES
by: Boyko, N. I., et al.
Published: (2014)

Expansion of cylindrical tubular workpieces on high-voltage magnetic-pulse installation with controlled vacuum discharger
by: Ljutenko, L. A., et al.
Published: (2021)

Calculation and experimental determination of the speed of advancement of the plasma leader channel of a pulse spark discharge in atmospheric air
by: Baranov, M. I.
Published: (2024)

Computer simulation of operation plant effective modes for water disinfection by electrical discharges in gas bubbles
by: Boiko, M. I., et al.
Published: (2024)

MATHEMATICAL MODEL OF THE EMC DISCHARGE PROCESS SOLUTION IN ALONE STATE WIND TURBINE WITH ELECTRODYNAMIC PUMP DRIVER
by: Holovko, V., et al.
Published: (2019)

AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE
by: Shalamov, S. P.
Published: (2016)

INVESTIGATION OF AMPLITUDE-TEMPORAL CHARACTERISTICS OF A HIGH-VOLTAGE RESISTIVE VOLTAGE DIVIDER
by: Boyko, N. I., et al.
Published: (2019)

Comparative analysis of principal modulation techniques for modular multilevel converter and a modified reduced switching frequency algorithm for nearest level pulse width modulation
by: Benboukous, M., et al.
Published: (2025)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
by: Baranov, M. I., et al.
Published: (2017)

PIEZOELECTRIC WAVEGUIDE SENSOR FOR MEASURING PULSE PRESSURE IN CLOSED LIQUID VOLUMES AT HIGH VOLTAGE ELECTRIC DISCHARGE
by: Zhekul, V. G., et al.
Published: (2017)

CHARACTERISTICS OF SPECIALIZED SINGLE-PHASE HIGH VOLTAGE DOUBLER RECTIFIER
by: Brzhezitsky, V. O., et al.
Published: (2018)

USING MOSFET-TRANSISTORS IN SOLAR PANELS
by: Bondarenko, D.
Published: (2022)

Analysis of energy characteristics of a transistor pulse generator in the process of electric spark dispersion of current-conductive granular media
by: Khrysto, O. I.
Published: (2025)

A COMPACT 70 KV CAPACITIVE VOLTAGE DIVIDER WITH A SHIELDED TRANSFER ELECTRODE
by: Boyko, N. I., et al.
Published: (2012)

Ultimate effect of non-identity of resistive elements of high-voltage arm on frequency characteristics of broadband voltage divider (analytical research)
by: Brzhezitsky, V. O., et al.
Published: (2023)

CREATION OF HIGH-VOLTAGE PULSE CAPACITORS ON THE BASIS OF A COMPOSITE FILM DIELECTRIC
by: Gun'ko, V. I., et al.
Published: (2014)

POWERFUL SOURCES OF PULSE HIGH-FREQUENCY ELECTROMECHANICAL TRANSDUCERS FOR MEASUREMENT, TESTING AND DIAGNOSTICS
by: Plesnetsov, S. Yu., et al.
Published: (2018)

Efficiency of a double-pulsed bridge noncontrolled rectifier with a capacitance filter
by: Zhemerov, George G., et al.
Published: (2012)

DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
by: Galinovskiy, A. M., et al.
Published: (2015)

RESEARCH INTO ELECTROMAGNETIC PROCESSES IN A COMBINED CYLINDRICAL-TYPE MATCHING DEVICE WITH A MASSIVE SINGLE-TURN INDUCTOR
by: Trunova, I. S.
Published: (2013)

AN APPROXIMATE CALCULATION OF ENERGY DISSIPATION AND ELECTRIC EROSION OF ELECTRODES IN THE HIGH-VOLTAGE HIGH-CURRENT AIR SWITCH OF ATMOSPHERIC PRESSURE
by: Baranov, M. I., et al.
Published: (2017)

IDENTIFICATION OF TECHNOLOGICAL DEFECTS IN HIGH-VOLTAGE SOLID INSULATION OF ELECTRICAL INSULATION STRUCTURES ON THE CHARACTERISTICS OF PARTIAL DISCHARGES
by: Bezprozvannych, G. V., et al.
Published: (2019)

Analysis of operating modes of a stand-alone wind turbine with induction generator using pulse converter for charging batteries based on simulation
by: Holovko, V., et al.
Published: (2017)

Еnergy-saving technology for processing of galvanic sludge with obtaining of radio-absorbing materials
by: Samchenko, Dmitry N., et al.
Published: (2020)

Monitoring of potential self-ignition zones of the forest according to cloud cover remote sensing data
by: Krasovska, I.G., et al.
Published: (2018)

On modeling and real-time simulation of a robust adaptive controller applied to a multicellular power converter
by: Hamdi, R., et al.
Published: (2022)

PERFORMANCE ANALYSIS OF USING TAPERED WINDOWS FOR SIDELOBE REDUCTION IN CHIRP-PULSE COMPRESSION
by: Galushko, V. G.
Published: (2019)

Influence of the initial winding displacement on the indicators of the electromechanical induction accelerator of cylindrical configuration
by: Bolyukh, V. F., et al.
Published: (2021)

Ultimate effect of non-identity of capacitive elements of high-voltage arm on frequency characteristics of voltage divider (analytical research)
by: Brzhezitsky, V. O., et al.
Published: (2021)

WORKING FEATURES OF POWER SOURCE SYSTEMS – A MULTIPLE CURRENT PULSE GENERATOR
by: Argun, Schasyana V.
Published: (2013)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
by: Bolyukh, V. F., et al.
Published: (2018)