Buchumschlag

FEATURES OF ELECTRODE MELTING IN ARC WELDING OF STEELS

Dependences of electrode metal melting rate upon welding current under arc welding have been investigated. Cases of the welding process with and without the electrode metal evaporation and with the electrode preliminary heating have been considered. It is determined that application of linear approx...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	Sydorets, V. N., Zhernosekov, A. M., Pentegov, I. V., Petrienko, O. I.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Schlagworte:	arc welding welding current electrode metal melting approximation 621.791.754 51-74
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.2.06
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Hygienic characteristics of welding methods and welding materials
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

On the solution of the problem of synthesis of the control system for the process of dosed feed of electrode wire for arc welding equipment
von: Lebedev, V.A.
Veröffentlicht: (2021)

Hygienic assessment of magnetic fields in different methods of arc welding
von: Levchenko, Oleg H., et al.
Veröffentlicht: (2024)

RESEARCH INTO METHODS OF PIPE END DEMAGNETIZATION UNDER MAIN PIPELINE REPAIR
von: Dobrodeyev, P. N.
Veröffentlicht: (2014)

Influence of technological parameters of the welding process on aerosol release
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Features of the energy distribution in ultrasonic welding for microprism optical elements
von: Tоkalin, O. A.
Veröffentlicht: (2015)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)

AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 17: INVENTIONS IN MATERIAL WELDING
von: Baranov, M. I.
Veröffentlicht: (2013)

CONTROL OF VALVE ELECTRIC DRIVE COORDINATES OF AUTOMATED WELDING EQUIPMENT FEED MECHANISMS
von: Lebedev, V. A., et al.
Veröffentlicht: (2020)

Application of thermostable steel with a 9% chrome at the reconstruction of thermal power stations in Ukraine
von: Tsaruk A.K., et al.
Veröffentlicht: (2005)

Features of the ultrasonic welding of optical mikroprismatic elements wih a dosing of energy
von: Britsky, A. I., et al.
Veröffentlicht: (2016)

Microprocessor control system of the electroontact surfacing with two roller electrodes
von: Чепель, Юлия Анатолиевна, et al.
Veröffentlicht: (2014)

Microprocessor control system of the electroontact surfacing with two roller electrodes
von: Чепель, Юлия Анатолиевна, et al.
Veröffentlicht: (2014)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

A COMPACT 70 KV CAPACITIVE VOLTAGE DIVIDER WITH A SHIELDED TRANSFER ELECTRODE
von: Boyko, N. I., et al.
Veröffentlicht: (2012)

THREE-ELECTRODE AIR SWITCHBOARD WITH THE GRAPHITE ELECTRODES OF KATG-50 ON VOLTAGE TO ±50 KV AND IMPULSE CURRENT BY AMPLITUDE TO ±220 KA
von: Baranov, M. I., et al.
Veröffentlicht: (2015)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Effectiveness of AC arc stabilization in welding with covered electrodes
von: A. F. Shatan, et al.
Veröffentlicht: (2009)

AN APPROXIMATE CALCULATION OF ENERGY DISSIPATION AND ELECTRIC EROSION OF ELECTRODES IN THE HIGH-VOLTAGE HIGH-CURRENT AIR SWITCH OF ATMOSPHERIC PRESSURE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

Studying the efficiency of the electrode materials operation in the electrolysis systems providing a separate cycle of gas generation
von: Соловей, Виктор Васильевич, et al.
Veröffentlicht: (2015)

Studying the efficiency of the electrode materials operation in the electrolysis systems providing a separate cycle of gas generation
von: Соловей, Виктор Васильевич, et al.
Veröffentlicht: (2015)

Features of arc with pulsed self-regulation of electrode melting process in relation to manual arc welding
von: Yu. Maksymov, et al.
Veröffentlicht: (2019)

USING A VIRTUAL DEVICE ULTRASONIC FLAW DETECTOR TO INSPECT WELDS
von: Bohachev, Ihor, et al.
Veröffentlicht: (2024)

SYNTHESIS AND ANALYSIS OF ARC FURNACE ELECTRICAL MODE CONTROL SYSTEM ON THE BASIS OF THREE-DIMENSIONAL PHASE CURRENTS VECTOR DISTRIBUTION
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2019)

APPLICATION OF SWARM INTELLIGENCE ALGORITHMS FOR SOLVING THE PROBLEM OF OPTIMIZING THE WELDED BEAM STRUCTURE
von: Lytovchenko, Mykyta, et al.
Veröffentlicht: (2024)

OPTIMIZATION OF DESIGN PARAMETERS OF AUTOTRANSFORMERS IN ICE MELTING SCHEME WITH NON-INDUCTIVE CIRCUIT ON 6-10 KV OVERHEAD POWER LINES
von: Lazurenko, O. P., et al.
Veröffentlicht: (2019)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

RELICS OF PALEOFLORA IN IMPACT MELT ROCKS OF THE EL’GYGYTGYN CRATER IN CHUKOTKA (RUSSIA)
von: Gurov, Y.P., et al.
Veröffentlicht: (2019)

Melting of electrode and base metal in electroslag welding
von: B. E. Paton, et al.
Veröffentlicht: (2013)

Analysis of energy characteristics of a transistor pulse generator in the process of electric spark dispersion of current-conductive granular media
von: Khrysto, O. I.
Veröffentlicht: (2025)