Buchumschlag

WORKING FEATURES OF POWER SOURCE SYSTEMS – A MULTIPLE CURRENT PULSE GENERATOR

An analysis of circuit designs as to connecting a magnetic pulse action tool to a power source has been carried out. Design features of a magnetic pulse installation control and monitoring system in a multiple current pulse mode have been revealed. The description of the control and monitoring syste...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	Argun, Schasyana V.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Schlagworte:	magnetic-pulse metal working magnetic pulse installation monitoring and control system thyristors unipolar pulse 621.318
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.2.09
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

A NEW TREND IN MAGNETIC-PULSE METAL WORKING ASSOCIATED WITH THIN-WALLED SHEET METAL ATTRACTION. HISTORY AND DEVELOPMENT PROSPECTS
von: Gnatov, A. V.
Veröffentlicht: (2013)

COMPARATIVE ANALYSIS OF PARAMETERS OF A COMPOSITE COIL FOR MAGNETIC PULSE MATERIAL WORKING
von: Baida, E. I.
Veröffentlicht: (2013)

RESEARCH INTO ELECTROMAGNETIC PROCESSES IN A COMBINED CYLINDRICAL-TYPE MATCHING DEVICE WITH A MASSIVE SINGLE-TURN INDUCTOR
von: Trunova, I. S.
Veröffentlicht: (2013)

THE MAIN INVENTIONS FOR TECHNOLOGIES OF THE MAGNETIC-PULSED ATTRACTION OF THE SHEET METALS. A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)

CALCULATIONS OF ELECTROMAGNETIC FORCES ACTING ON A THIN FERROMAGNETIC PLATE DURING MAGNETIC-PULSE TREATMENT
von: Baida, E. I.
Veröffentlicht: (2014)

EXPERIMENTAL INVESTIGATION OF THE CURRENT DISTRIBUTION ON THE SHEET BLANK SURFACE IN LINEAR TOOLS OF MAGNETIC-PULSED ATTRACTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2020)

CONTROLLABILITY OF NON-CONTACT MAGNETIC PULSE STRAIGHTENING
von: Gnatov, A. V.
Veröffentlicht: (2013)

THE EXCITED LOADS OF ATTRACTION IN A SYMMETRICAL INDUCTOR SYSTEM FOR THE MAGNETIC PULSE REMOVING OF THE BODY CAR
von: Gnatov, A. V.
Veröffentlicht: (2015)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
von: Gnatov, A. V.
Veröffentlicht: (2012)

EXPERIMENTAL APPROBATION OF AN ELECTRODYNAMIC DIRECT ELECTRIC SYSTEM FOR EXTERNAL AUTOMOBILE BODY REPAIR
von: Bondarenko, A. Yu., et al.
Veröffentlicht: (2014)

NUMERICAL ESTIMATES OF ELECTRODYNAMICS PROCESSES IN THE INDUCTOR SYSTEM WITH AN ATTRACTIVE SCREEN AND A FLAT RECTANGULAR SOLENOID
von: Chaplygin, E. A., et al.
Veröffentlicht: (2018)

FORMING CAPABILITIES OF A PULSE MAGNETIC FIELD GENERATOR
von: Petkov, A. A.
Veröffentlicht: (2015)

EXPERIMENTAL APPROBATION OF SHEET METAL MAGNETIC PERMEABILITY MEASUREMENT SYSTEMS
von: Chaplygin, E. A., et al.
Veröffentlicht: (2014)

PULSED POWER TO MICROWAVES CONVERSION IN NONLINEAR TRANSMISSION LINES
von: Karelin, S. Y., et al.
Veröffentlicht: (2021)

ANALYSIS OF THE PROCESSES IN AN INDUCTOR SYSTEM WITH AN ATTRACTING SCREEN EXCITED BY THE EXTERNAL CIRCULAR SOLENOID
von: Chaplygin, E. A.
Veröffentlicht: (2015)

NUMERICAL ESTIMATES OF CURRENTS AND FORCES IN LINEAR TOOLS OF THE MAGNETIC-PULSE ATTRACTION OF METALS. PART 1: LOW ELECTRICAL CONDUCTANCE METALS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2019)

NUMERICAL ESTIMATES OF CURRENTS AND FORCES IN LINEAR TOOLS OF THE MAGNETIC-PULSE ATTRACTION OF METALS. PART 2: HIGH ELECTRICAL CONDUCTANCE METALS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2019)

INVESTIGATION OF INFLUENCE OF SEPARATOR MAGNETIC SYSTEM CONFIGURATION WITH PERMANENT MAGNETS ON MAGNETIC FIELD DISTRIBUTION IN WORKING AREA
von: Gerlici, Juraj, et al.
Veröffentlicht: (2017)

Energy characteristics for nanosecond current interrupter of semiconductor-magnetic pulse generator’s terminal stage
von: Khrysto, O. I.
Veröffentlicht: (2023)

Mutual influence of currents in plane inductor system with solenoid between two massive conductors
von: Batygin, Yu.V., et al.
Veröffentlicht: (2021)

MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

Expansion of cylindrical tubular workpieces on high-voltage magnetic-pulse installation with controlled vacuum discharger
von: Ljutenko, L. A., et al.
Veröffentlicht: (2021)

GENERATOR ON ARCADYEV-MARX SCHEME WITH PEAKING OF THE PULSE FRONT IN ITS CASCADES FOR FOOD DISINFECTING
von: Boyko, N. I., et al.
Veröffentlicht: (2017)

HIGH-PERFORMANCE ELECTROMECHANICAL AND ELECTROMAGNETIC PULSE DEVICES FOR DESTRUCTION OF INFORMATION ON DIGITAL DRIVES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

Current-voltage characteristics of single-stage semiconductor magnetic pulse generators with a distinctive structure of the conversion link in the input circuit
von: Khrysto, O. I.
Veröffentlicht: (2023)

PERFORMANCE ANALYSIS OF USING TAPERED WINDOWS FOR SIDELOBE REDUCTION IN CHIRP-PULSE COMPRESSION
von: Galushko, V. G.
Veröffentlicht: (2019)

A REFINED MATHEMATICAL MODEL OF MULTIPHYSICS PROCESSES FOR MAGNETIC PULSE TREATMENT OF MATERIALS
von: Baida, E. I.
Veröffentlicht: (2015)

MAGNETIC-PULSE PRESSING OF ELECTRICAL CONNECTIONS FOR STRANDED WIRES
von: Samokhvalova, Zh. V., et al.
Veröffentlicht: (2019)

Analysis of energy characteristics of a transistor pulse generator in the process of electric spark dispersion of current-conductive granular media
von: Khrysto, O. I.
Veröffentlicht: (2025)

ON THE APPLICABILITY OF THE PHASE SCANNING METHOD IN ANTENNA ARRAYS OF CHIRP PULSE RADARS
von: Galushko, V. G., et al.
Veröffentlicht: (2019)

THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
von: Gurin, A. G., et al.
Veröffentlicht: (2019)

CALCULATION OF FIELDS IN A COMBINED INDUCTOR SYSTEM AS A TOOLS OF STRAIGHTENING OF METAL COATING OF CAR BODY
von: Voloncevich, D. O., et al.
Veröffentlicht: (2015)

ANALYSIS OF ELECTROMAGNETIC PROCESS IN COMBINED INDUCTOR SYSTEMS, AS TOOLS FOR STRAIGHTENING OF MODERN CAR
von: Voloncevich, D. O., et al.
Veröffentlicht: (2015)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

Energy-saving processing of galvanic sludge by the feritization method
von: Yemchura, Bogdan, et al.
Veröffentlicht: (2020)

MAGNETIC-PULSE CAR BODY PANELS FLATTENING. THEORETICAL ASPECTS AND PRACTICAL RESULTS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

POWERFUL SOURCES OF PULSE HIGH-FREQUENCY ELECTROMECHANICAL TRANSDUCERS FOR MEASUREMENT, TESTING AND DIAGNOSTICS
von: Plesnetsov, S. Yu., et al.
Veröffentlicht: (2018)

DETERMINATION OF THE RATIONAL GEOMETRICAL PARAMETERS OF PLATE TYPE ELEMENTS OF MAGNETIC MATRIX OF THE POLYGRADIENT SEPARATOR
von: Gerlici, Juraj, et al.
Veröffentlicht: (2018)

Obtaining the maximum power from the source using step-up and step-down type pulse regulators that work on battery
von: Romashko, V. Y., et al.
Veröffentlicht: (2024)