SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM
This paper, presents the application of the direct vector control using the sliding mode control (SMC) on the doubly fed induction generators (DFIG). The synthesis of the control laws is based on the model obtained by the orientation of the stator flux. The active and reactive powers that are genera...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2018
|
| Теми: | |
| Онлайн доступ: | http://eie.khpi.edu.ua/article/view/2074-272X.2018.3.08 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Репозитарії
Electrical Engineering & Electromechanics| id |
eiekhpieduua-article-132964 |
|---|---|
| record_format |
ojs |
| spelling |
eiekhpieduua-article-1329642018-06-07T11:37:00Z SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM Glaoui, Hachemi Harrouz, Abdelkader doubly fed induction generators (DFIG) vector control sliding mode control 621.31 индукционные генераторы двойного питания (DFIG) векторное управление управление режимом скольжения 621.31 This paper, presents the application of the direct vector control using the sliding mode control (SMC) on the doubly fed induction generators (DFIG). The synthesis of the control laws is based on the model obtained by the orientation of the stator flux. The active and reactive powers that are generated by the doubly fed induction generators will be decoupled by the orientation of the stator flux and controlled by sliding mode controllers that have been developed. In order to rule on the validity as well as the performance of this type of adjustment, we will check its robustness by varying some parameters of the machine doubly fed induction. Цель. В статье представлено применение прямого векторного управления с использованием управления режимом скольжения (SMC) на индукционных генераторах двойного питания (DFIG). Синтез законов управления основан на модели, полученной с помощью ориентации потока статора. Активные и реактивные мощности, генерируемые индукционными генераторами двойного питания, разделены ориентацией потока статора и управляются разработанными контроллерами режима скольжения. Чтобы определить достоверность и эффективность данного типа регулирования, проверяется его надежность путем варьирования ряда параметров машины двойного питания. National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2018-06-07 Article Article application/pdf http://eie.khpi.edu.ua/article/view/2074-272X.2018.3.08 10.20998/2074-272X.2018.3.08 Electrical Engineering & Electromechanics; No. 3 (2018); 61-67 Электротехника и Электромеханика; № 3 (2018); 61-67 Електротехніка і Електромеханіка; № 3 (2018); 61-67 2309-3404 2074-272X en http://eie.khpi.edu.ua/article/view/2074-272X.2018.3.08/129583 Copyright (c) 2018 Hachemi Glaoui, Abdelkader Harrouz https://creativecommons.org/licenses/by-nc/4.0 |
| institution |
Electrical Engineering & Electromechanics |
| baseUrl_str |
|
| datestamp_date |
2018-06-07T11:37:00Z |
| collection |
OJS |
| language |
English |
| topic |
doubly fed induction generators (DFIG) vector control sliding mode control 621.31 |
| spellingShingle |
doubly fed induction generators (DFIG) vector control sliding mode control 621.31 Glaoui, Hachemi Harrouz, Abdelkader SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| topic_facet |
doubly fed induction generators (DFIG) vector control sliding mode control 621.31 индукционные генераторы двойного питания (DFIG) векторное управление управление режимом скольжения 621.31 |
| format |
Article |
| author |
Glaoui, Hachemi Harrouz, Abdelkader |
| author_facet |
Glaoui, Hachemi Harrouz, Abdelkader |
| author_sort |
Glaoui, Hachemi |
| title |
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| title_short |
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| title_full |
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| title_fullStr |
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| title_full_unstemmed |
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| title_sort |
sliding mode control of the dfig used in wind energy system |
| title_alt |
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM |
| description |
This paper, presents the application of the direct vector control using the sliding mode control (SMC) on the doubly fed induction generators (DFIG). The synthesis of the control laws is based on the model obtained by the orientation of the stator flux. The active and reactive powers that are generated by the doubly fed induction generators will be decoupled by the orientation of the stator flux and controlled by sliding mode controllers that have been developed. In order to rule on the validity as well as the performance of this type of adjustment, we will check its robustness by varying some parameters of the machine doubly fed induction. |
| publisher |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine |
| publishDate |
2018 |
| url |
http://eie.khpi.edu.ua/article/view/2074-272X.2018.3.08 |
| work_keys_str_mv |
AT glaouihachemi slidingmodecontrolofthedfigusedinwindenergysystem AT harrouzabdelkader slidingmodecontrolofthedfigusedinwindenergysystem |
| first_indexed |
2025-07-17T11:47:10Z |
| last_indexed |
2025-07-17T11:47:10Z |
| _version_ |
1850411779115450368 |