Buchumschlag

FEATURES OF ELECTRIC MOTOR CHOICE FOR NUCLEAR POWER PLANT TECHNOLOGICAL OBJECTS

Nuclear power plants remain the basic power generating enterprises for Ukraine. Execution of works on their reliability control and operating conditions optimization is therefore of current importance. Trouble-free nuclear power plant operation is a vital technical, economical, and ecological proble...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	Pavlenko, T. P., Shevchenko, V. V.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Schlagworte:	nuclear power plant operation optimization reliability electric equipment electric motors 621.175
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.3.07
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

A CHOICE OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN POWER CIRCUITS OF ELECTRICAL EQUIPMENT OF POWER INDUSTRY
von: Baranov, M. I.
Veröffentlicht: (2019)

OPERATIONAL RELIABILITY ANALYSIS FOR SUSTAINABLE ENERGY SYSTEM PLANNING DEVELOPMENT
von: Bardyk , Ye., et al.
Veröffentlicht: (2024)

Geoelectric studies of the Kozloduy nuclear power plant region, Bulgaria
von: Logvinov, I., et al.
Veröffentlicht: (2022)

COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
von: Teriaiev, V., et al.
Veröffentlicht: (2020)

Optimization of Systems Repair Plans and Assessment of the Useful Life of Nuclear Power Plant Equipment
von: Zevin, Leonid I., et al.
Veröffentlicht: (2021)

Optimization of Systems Repair Plans and Assessment of the Useful Life of Nuclear Power Plant Equipment
von: Zevin, Leonid I., et al.
Veröffentlicht: (2021)

OPTIMAL CONTROL OF THE ELECTRIC SHIPS’ PROPULSION MOTORS DURING REVERSAL
von: Yarovenko, V. A., et al.
Veröffentlicht: (2018)

CONTROL OF ELECTRIC SHIPS’ PROPULSION MOTORS WHEN MOVING ON CURVILINEAR TRAJECTORY
von: Yarovenko, V. A., et al.
Veröffentlicht: (2020)

EFFICIENCY OF ELECTRIC FIELD IMPACT ON INTENSIFICATION OF BIOGAS RELEASE IN HERMOPHILIC MODE
von: Kachan, Yu. G., et al.
Veröffentlicht: (2018)

Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)

A CHOICE OF ACCEPTABLE SECTIONS OF ELECTRIC WIRES AND CABLES IN ON-BOARD CIRCUITS OF AIRCRAFT ELECTRICAL EQUIPMENT
von: Baranov, M. I.
Veröffentlicht: (2020)

ENSURING BALANCE RELIABILITY OF ELECTRIC POWER SYSTEMS WITH RENEWABLE ENERGY SOURCES
von: Kazanskiy, S., et al.
Veröffentlicht: (2019)

A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP
von: Voloshko, A. V., et al.
Veröffentlicht: (2016)

OVERLAPPING OF IMBALANCES OF GENERATED AND FORECAST ELECTRICITY BY SOLAR POWER PLANT AT THE EXPENSE OF THE ELECTRICITY ACCUMULATION SYSTEM
von: Budko, V., et al.
Veröffentlicht: (2021)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)

CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
von: Finkelshtein, V. B., et al.
Veröffentlicht: (2016)

A CALCULATION METHOD OF TRANSIENT MODES OF ELECTRIC SHIPS’ PROPELLING ELECTRIC PLANTS
von: Yarovenko, V. A., et al.
Veröffentlicht: (2017)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

FEATURES OF DETERMINATION OF RATIONAL SITES FOR PLACEMENT OF PHOTOVOLTAIC PLANTS IN UKRAINE
von: Kyrnas, L., et al.
Veröffentlicht: (2019)

EQUATIONS OF ELECTRIC MOTOR POWER SUPPLY UNIT DISSYMMETRY UNDER PHASE SHORT-CIRCUIT FAULT
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)

INEVITABILITY OF UKRAINE'S TRANSITION TO RENEWABLE ENERGY
von: Tuchynskyi, B., et al.
Veröffentlicht: (2020)

Technological and operating features of the AR-1000 reactors Generation III+ and small modular reactors MR-160
von: Vashchenko, Volodymyr, et al.
Veröffentlicht: (2021)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

ANALYSIS OF BALANCE RELIABILITY OF ELECTRIC POWER SYSTEMS WITH RENEWABLE ENERGY SOURCES
von: Mateienko, Y, et al.
Veröffentlicht: (2021)

Wind energy potential estimation for the Chernobyl nuclear power plant exclusion zone
von: Kudria, S., et al.
Veröffentlicht: (2016)

EQUATIONS OF ELECTRIC MOTOR POWER SUPPLY UNIT DISSYMMETRY UNDER PHASE-TO-PHASE SHORT-CIRCUIT FAULT
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)

REFINED SELECTION OF ALLOWABLE CROSS-SECTIONS OF ELECTRICAL CONDUCTORS AND CABLES IN THE POWER CIRCUITS OF INDUSTRIAL ELECTRICAL EQUIPMENT TAKING INTO ACCOUNT EMERGENCY OPERATING MODES
von: Baranov, M. I.
Veröffentlicht: (2019)

A MATHEMATICAL MODEL OF THE ELECTRICAL ENGINEERING COMPLEX FOR DRIVE OF MAIN CIRCULATION PUMPS OF NUCLEAR REACTOR VVER-1000 OF NUCLEAR POWER PLANTS
von: Vasyliv, K. M., et al.
Veröffentlicht: (2019)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)

Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)

Numerical study of particles trajectories in a multifunctional electrostatic separator powered by photovoltaic system
von: Guettaf, N., et al.
Veröffentlicht: (2026)

Mathematical modeling of electromechanical processes in a brushless DC motor
von: Tkachuk, V. I., et al.
Veröffentlicht: (2014)

REQUIREMENTS FOR DEVICES FOR VERTICAL ELECTRICAL SOUNDING OF SOIL AT DIAGNOSTICS OF GROUNDING DEVICES
von: Rudenko, S. S.
Veröffentlicht: (2016)

FUNCTIONAL CORRELATION OF PARAMETERS AND CRITERIA OF RATIONAL CHOICE FOR ELECTRIC DEVICE
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

ANALYSIS OF OPTIMUM OPERATING MODES OF POWER TRANSFORMERS UNDER OPERATING CONDITIONS
von: Khomenko, I. V., et al.
Veröffentlicht: (2016)

Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
von: Darsouni, Z., et al.
Veröffentlicht: (2025)