Buchumschlag

A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR

Purpose. Development of a method for calculating mechanical characteristics of induction motors, taking into consideration saturation of the magnetic path and displacement of the current in the rotor bars. Methodology. The algorithm is based on calculating the steady-state mode of induction motor op...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	Malyar, V. S., Malyar, A. V., Andreishyn, A. S.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2019
Schlagworte:	induction motor squirrel-cage rotor static characteristics saturation displacement of the current 621.313.33 62–83–52
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2019.2.02
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)

MODELLING OF DYNAMIC MODES OF AN INDUCTION ELECTRIC DRIVE AT PERIODIC LOAD
von: Malyar, V. S., et al.
Veröffentlicht: (2020)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)

MECHANICAL CHARACTERISTICS OF THREE-PHASE INDUCTION MOTORS WITH SINGLE-PHASE POWER SUPPLY
von: Malyar, V. S., et al.
Veröffentlicht: (2016)

Adding effect of current displacement and magnetic circuit saturation in an asynchronous motor mathematical model
von: Tsodik, I. A., et al.
Veröffentlicht: (2014)

IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)

METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)

DYNAMIC REGIMES OF ASYNCHRONOUS MOTORS WITH CONCATENATED CAPACITORS
von: Malyar, V. S., et al.
Veröffentlicht: (2015)

CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

SIMULATION OF MAGNETIC INDUCTION DISTRIBUTION IN A COAXIAL LINEAR MOTOR WITH AXIAL AND RADIAL DIRECTION OF PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)

FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

Wind farms integration into power system with improved location and stability problem solving
von: Hafaiedh, H., et al.
Veröffentlicht: (2025)

AIRGAP MAGNETIC INDUCTION DISTRIBUTION IN A COAXIALLY-LINEAR SYNCHRONOUS MOTOR WITH AXIAL AND RADIAL DIRECTION OF THE RUNNER PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)

Exact values of girth for some graphs \(D\left({k},{q}\right)\) and upper bounds of the order of cages
von: Pikuta, Piotr
Veröffentlicht: (2018)

RESEARCH OF ARC FURNACE ELECTRICAL MODE WITH A FUZZY CONTROL MODEL
von: Paranchuk, Y. S., et al.
Veröffentlicht: (2020)

EQUATIONS OF ELECTRIC MOTOR POWER SUPPLY UNIT DISSYMMETRY UNDER PHASE SHORT-CIRCUIT FAULT
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)

STUDYING THE EFFECT OF AN ADDITIONAL ACTIVE RESISTANCE IN THE FIELD WINDING CIRCUIT ON STARTING CHARACTERISTICS OF SALIENT-POLE SYNCHRONOUS MOTORS
von: Malyar, V. S., et al.
Veröffentlicht: (2018)

EQUATIONS OF ELECTRIC MOTOR POWER SUPPLY UNIT DISSYMMETRY UNDER PHASE-TO-PHASE SHORT-CIRCUIT FAULT
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)

RESONANT PROCESSES IN STARTING MODES OF SYNCHRONOUS MOTORS WITH CAPACITORS IN THE EXCITATION WINDINGS CIRCUIT
von: Malyar, V. S., et al.
Veröffentlicht: (2017)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

MODELING OF OPERATION OF COAXIAL-LINEAR MOTORS WITH AXIAL AND RADIAL DIRECTIONS OF MAGNETIZATION OF PERMANENT MAGNETS IN DYNAMIC MODE
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

Smart PV-H2 grid energy complex
von: Solovey, V., et al.
Veröffentlicht: (2017)

Smart PV-H2 grid energy complex
von: Solovey, V., et al.
Veröffentlicht: (2017)

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

SYNTHESIS AND ANALYSIS OF ARC FURNACE ELECTRICAL MODE CONTROL SYSTEM ON THE BASIS OF THREE-DIMENSIONAL PHASE CURRENTS VECTOR DISTRIBUTION
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2019)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)

Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)

DEVELOPMENT OF METHODS AND MEANS OF COMPUTER SIMULATION FOR STUDYING ARC FURNACE ELECTRIC MODES
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018)

INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
von: Lobov, V. I., et al.
Veröffentlicht: (2016)

ANALYSIS OF STATIC CHARACTERISTICS OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR ROTOR WITH ANTI-FLUGE CONTROL
von: Golovko, V., et al.
Veröffentlicht: (2022)

Class structure of electromechanical energy converter models with UML-diagrams application
von: Pliugin, V. E.
Veröffentlicht: (2014)

AN OBJECT-ORIENTED FIELD MODEL OF ELECTROMECHANICAL TRANSFORMERS OF ENERGY
von: Pliugin, V. E.
Veröffentlicht: (2015)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2016)

FEATURES OF USAGE METHODS WELL LOG SURVEY AND OTHER METHODS FOR EXPLORATION SHALE GAS DEPOSITS
von: Golub, P.S., et al.
Veröffentlicht: (2014)

Dynamic measurement of magnetic characteristics of switched reluctance motor
von: Fan, J., et al.
Veröffentlicht: (2023)