DEVELOPMENT OF EXCITATION STRUCTURE RBF-METAMODELS OF MOVING CONCENTRIC EDDY CURRENT PROBE
Introduction. The work is devoted to metamodels creation of surface circular concentric eddy current probe. Formulation of the problem. In the problem of surface circular concentric eddy current probe synthesis in the general formulation, apriori given desired eddy currents density distribution in t...
Saved in:
| Date: | 2019 |
|---|---|
| Main Authors: | Halchenko, V. Ya., Trembovetska, R. V., Tychkov, V. V. |
| Format: | Article |
| Language: | English Ukrainian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2019
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2019.2.05 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
RESEARCH ON ADDED INDUCTANCE AND RESISTANCE DURING SPIRAL FERROMAGNETIC WIRE SCANNING WITH MAGNETIC FIELD OF A PARAMETRIC EDDY-CURRENT SENSOR
by: Kostiukov, I. A.
Published: (2014)
by: Kostiukov, I. A.
Published: (2014)
Computer-economical optimization method for solving inverse problems of determining electrophysical properties of objects in eddy current structroscopy
by: Halchenko, V. Ya., et al.
Published: (2025)
by: Halchenko, V. Ya., et al.
Published: (2025)
Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
by: Мягкохлеб, К. Б., et al.
Published: (2018)
by: Мягкохлеб, К. Б., et al.
Published: (2018)
Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
by: Мягкохлеб, К. Б., et al.
Published: (2018)
by: Мягкохлеб, К. Б., et al.
Published: (2018)
GENERAL QUESTIONS AS TO PROVIDING ELECTROMAGNETIC COMPATIBILITY OF POWER CABLE LINES, THEIR AMPERAGE CAPACITY AND TYPES OF SHIELD CONSTRUCTION
by: Kostiukov, I. A.
Published: (2013)
by: Kostiukov, I. A.
Published: (2013)
Model of pulsating current traction motor taking into consideration magnetic losses in steel
by: Goolak, S., et al.
Published: (2021)
by: Goolak, S., et al.
Published: (2021)
TWO-DIMENSIONAL FEM-ANALYSIS OF EDDY CURRENTS LOSS IN LAMINATED MAGNETIC CIRCUITS
by: Makarchuk, O. V., et al.
Published: (2019)
by: Makarchuk, O. V., et al.
Published: (2019)
The mutual influence of exciting and induced currents in the circular solenoid – massive conductor system
by: Batygin, Yu. V., et al.
Published: (2023)
by: Batygin, Yu. V., et al.
Published: (2023)
FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
by: Zablodskii, N. N., et al.
Published: (2013)
by: Zablodskii, N. N., et al.
Published: (2013)
EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
by: Kostiukov, I. A.
Published: (2014)
by: Kostiukov, I. A.
Published: (2014)
A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
by: Gnatov, A. V.
Published: (2012)
by: Gnatov, A. V.
Published: (2012)
ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
by: Batygin, Yu. V., et al.
Published: (2018)
by: Batygin, Yu. V., et al.
Published: (2018)
Synthesis of eddy current probes with volumetric structure of the excitation system, implementing homogeneous sensitivity in the testing zone
by: Ya. Halchenko, et al.
Published: (2021)
by: Ya. Halchenko, et al.
Published: (2021)
Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
by: Milykh, V. I.
Published: (2023)
by: Milykh, V. I.
Published: (2023)
NATIONAL STRATIGRAPHIC COMMITTEE OF UKRAINE
by: Gozhyk, P.F., et al.
Published: (2020)
by: Gozhyk, P.F., et al.
Published: (2020)
POWERFUL SOURCES OF PULSE HIGH-FREQUENCY ELECTROMECHANICAL TRANSDUCERS FOR MEASUREMENT, TESTING AND DIAGNOSTICS
by: Plesnetsov, S. Yu., et al.
Published: (2018)
by: Plesnetsov, S. Yu., et al.
Published: (2018)
Genesis invention
by: Gritsayenko, V. I.
Published: (2012)
by: Gritsayenko, V. I.
Published: (2012)
Analysis of Nearfield Method for Optical Data Storage Using Microstrip Probe Under Illumi-nating Mode
by: Lapchuk, A. S., et al.
Published: (2013)
by: Lapchuk, A. S., et al.
Published: (2013)
Electrical engineering equipment for generating and measuring of complete pulse current of artificial lightning in the conditions of high-voltage electrophysics laboratory
by: Baranov, M. I., et al.
Published: (2024)
by: Baranov, M. I., et al.
Published: (2024)
Integrity of information in the systems of vibrations analysis and reliability of its selection
by: Трохим, Г. Р., et al.
Published: (2016)
by: Трохим, Г. Р., et al.
Published: (2016)
Integrity of information in the systems of vibrations analysis and reliability of its selection
by: Трохим, Г. Р., et al.
Published: (2016)
by: Трохим, Г. Р., et al.
Published: (2016)
High efficiency excitation of near-field probe based on optical plasmon microstrip line using connector SU-8
by: Morozov, E. M., et al.
Published: (2015)
by: Morozov, E. M., et al.
Published: (2015)
Optimization of the design of eddy current probe of parametric type to detect surface cracks
by: V. M. Uchanin
Published: (2022)
by: V. M. Uchanin
Published: (2022)
Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
by: Шульженко, М. Г., et al.
Published: (2016)
by: Шульженко, М. Г., et al.
Published: (2016)
Definition of the thermal and thermostressed states of turbine rotor in resource counter
by: Шульженко, М. Г., et al.
Published: (2016)
by: Шульженко, М. Г., et al.
Published: (2016)
Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
by: Шульженко, М. Г., et al.
Published: (2016)
by: Шульженко, М. Г., et al.
Published: (2016)
Definition of the thermal and thermostressed states of turbine rotor in resource counter
by: Шульженко, М. Г., et al.
Published: (2016)
by: Шульженко, М. Г., et al.
Published: (2016)
The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
by: Vasko, P., et al.
Published: (2016)
by: Vasko, P., et al.
Published: (2016)
Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
by: Tran, C. D., et al.
Published: (2024)
by: Tran, C. D., et al.
Published: (2024)
Modelling and performance testing of a digital over-current relay enhanced designed model
by: Sekhane, H., et al.
Published: (2022)
by: Sekhane, H., et al.
Published: (2022)
THE METHODIC OF CALCULATING THE CURRENT DENSITY DISTRIBUTION IN THE DISK-SHAPED ROTOR OF ELECTRODYNAMIC BRAKE
by: Tsygankova, G.
Published: (2018)
by: Tsygankova, G.
Published: (2018)
Single phase transformerless inverter for grid connected photovoltaic system with reduced leakage current
by: Janardhan, G., et al.
Published: (2022)
by: Janardhan, G., et al.
Published: (2022)
PROVIDING OF THE DESCRIPTION ACCURACY OF THE CHARACTERISTICS FOR GROUPS OF SOLAR PHOTOVOLTAIC CELL AND SOLAR ARRAY BASED ON TARGET EXPERIMENTS ON THE COMPLEX EQUIPMENT
by: Bezruchko, K., et al.
Published: (2020)
by: Bezruchko, K., et al.
Published: (2020)
Ontological Approach to the Designing Metamodel of the Subject Area of Inductive Modelling
by: H. A. Pidnebesna
Published: (2018)
by: H. A. Pidnebesna
Published: (2018)
Features of distribution of electric field strength and current density in the reactor during treatment of liquid media with high-voltage pulse discharges
by: Boiko, M. I., et al.
Published: (2024)
by: Boiko, M. I., et al.
Published: (2024)
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Назарчук, З. Т., et al.
Published: (2016)
by: Назарчук, З. Т., et al.
Published: (2016)
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
by: Назарчук, З. Т., et al.
Published: (2016)
by: Назарчук, З. Т., et al.
Published: (2016)
INVESTIGATION OF THE EFFICIENCY OF OPERATION OF A CENTRAL TYPE INVERTER AT AN INDUSTRIAL SOLAR POWER PLANT
by: Bordakov, M
Published: (2019)
by: Bordakov, M
Published: (2019)
FEATURES OF DESIGN THE PART OF POWER ELECTRONICS IN SOLAR GRID ON INVERTERS
by: Bordakov, M
Published: (2020)
by: Bordakov, M
Published: (2020)
THERMAL SMEARING OF INFRARED PATTERN ON THE SURFACE OF A THIN FILM HTSC BOLOMETER
by: Gordiyenko, E. Yu., et al.
Published: (2019)
by: Gordiyenko, E. Yu., et al.
Published: (2019)
Similar Items
-
RESEARCH ON ADDED INDUCTANCE AND RESISTANCE DURING SPIRAL FERROMAGNETIC WIRE SCANNING WITH MAGNETIC FIELD OF A PARAMETRIC EDDY-CURRENT SENSOR
by: Kostiukov, I. A.
Published: (2014) -
Computer-economical optimization method for solving inverse problems of determining electrophysical properties of objects in eddy current structroscopy
by: Halchenko, V. Ya., et al.
Published: (2025) -
Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
by: Мягкохлеб, К. Б., et al.
Published: (2018) -
Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
by: Мягкохлеб, К. Б., et al.
Published: (2018) -
GENERAL QUESTIONS AS TO PROVIDING ELECTROMAGNETIC COMPATIBILITY OF POWER CABLE LINES, THEIR AMPERAGE CAPACITY AND TYPES OF SHIELD CONSTRUCTION
by: Kostiukov, I. A.
Published: (2013)