Cover Image

GENERAL QUESTIONS AS TO PROVIDING ELECTROMAGNETIC COMPATIBILITY OF POWER CABLE LINES, THEIR AMPERAGE CAPACITY AND TYPES OF SHIELD CONSTRUCTION

Works studying ways of reducing magnetic fields of cross-linked polyethylene power cable lines are reviewed. Different aspects of single-phase power cable shield construction influence on thermal conditions of a three-phase power cable line are analyzed. Questions concerning electromagnetic compatib...

Full description

Saved in:

Bibliographic Details
Date:	2013
Main Author:	Kostiukov, I. A.
Format:	Article
Language:	Russian
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Subjects:	eddy current loss circulating current electromagnetic compatibility 621.315.2
Online Access:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.4.13
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
by: Kostiukov, I. A.
Published: (2014)

IMPROVING CALCULATION ACCURACY OF CURRENTS IN CABLE SHIELDS AT DOUBLE-SIDED GROUNDING OF THREE-PHASE CABLE LINE
by: Grinchenko, V. S., et al.
Published: (2017)

DYNAMICS OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLE HEATING
by: Zolotaryov, V. M., et al.
Published: (2013)

DETERMINATION OF ANALYTICAL CALCULATION ERROR OF MAGNETIC FIELD OF HIGH-VOLTAGE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS CAUSED BY NON-UNIFORM CURRENT DISTRIBUTION IN THE SHIELDS
by: Tkachenko, A. O.
Published: (2017)

PROBLEMS OF ECONOMIC CRITERIA APPLICATION TO CALCULATION AND DESIGN OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLES
by: Golik, O. V.
Published: (2013)

Model of pulsating current traction motor taking into consideration magnetic losses in steel
by: Goolak, S., et al.
Published: (2021)

HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
by: Antonets, T. Yu., et al.
Published: (2015)

OVERLOAD CAPABILITY OF POWER CABLES IN ACTUAL POWER CONSUMPTION SYSTEMS
by: Shchebeniuk, L. A.
Published: (2013)

STUDY OF THE MAGNETIC FIELD OF THREE PHASE LINES OF SINGLE CORE POWER CABLES WITH TWO-END BONDING OF THEIR SHIELDS
by: Rozov, V. Yu., et al.
Published: (2015)

RESEARCH ON ADDED INDUCTANCE AND RESISTANCE DURING SPIRAL FERROMAGNETIC WIRE SCANNING WITH MAGNETIC FIELD OF A PARAMETRIC EDDY-CURRENT SENSOR
by: Kostiukov, I. A.
Published: (2014)

INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE POWER CABLES WITH XLPE INSULATION
by: Shchebeniuk, L. A., et al.
Published: (2016)

The mutual influence of exciting and induced currents in the circular solenoid – massive conductor system
by: Batygin, Yu. V., et al.
Published: (2023)

Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
by: Мягкохлеб, К. Б., et al.
Published: (2018)

Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
by: Мягкохлеб, К. Б., et al.
Published: (2018)

Estimation Method for Compatibility of Normative Documents
by: Mezentsev, O. V.
Published: (2014)

TECHNOLOGICAL MONITORING OF ELECTRICAL RESISTANCE OF PRESSED CABLE CONDUCTORS IN PRODUCTION CONDITIONS
by: Antonets, Y. A., et al.
Published: (2019)

STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
by: Golik, O. V.
Published: (2016)

Problems compatibility of complex analytics of scenarios and theoretical basis of its solution
by: Сенченко , В. Р.
Published: (2021)

DEVELOPMENT OF EXCITATION STRUCTURE RBF-METAMODELS OF MOVING CONCENTRIC EDDY CURRENT PROBE
by: Halchenko, V. Ya., et al.
Published: (2019)

Development of a boost-inverter converter under electromagnetic compatibility stress equipping a photovoltaic generator
by: Bechekir, S., et al.
Published: (2023)

Improving the operation of an asymmetric inverter with magnetically coupled inductors for energy storage systems
by: Martynov, D. V., et al.
Published: (2025)

Deformations of compatible Hom-mock-Lie algebras
by: Benali, Karima, et al.
Published: (2025)

TWO-DIMENSIONAL FEM-ANALYSIS OF EDDY CURRENTS LOSS IN LAMINATED MAGNETIC CIRCUITS
by: Makarchuk, O. V., et al.
Published: (2019)

EXPERIMENTAL RESEARCH ON DIELECTRIC STRENGTH OF PEEIDH-0.63 WIRE
by: Gurin, A. G., et al.
Published: (2013)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
by: Gnatov, A. V.
Published: (2012)

Experimental electromagnetic compatibility of conducted electromagnetic interferences from an IGBT and a MOSFET in the power supply
by: Lahlaci, M. E., et al.
Published: (2024)

ONLINE TECHNOLOGICAL MONITORING OF INSULATION DEFECTS IN ENAMELED WIRES
by: Zolotaryov, V. M., et al.
Published: (2017)

PROVIDING OF THE DESCRIPTION ACCURACY OF THE CHARACTERISTICS FOR GROUPS OF SOLAR PHOTOVOLTAIC CELL AND SOLAR ARRAY BASED ON TARGET EXPERIMENTS ON THE COMPLEX EQUIPMENT
by: Bezruchko, K., et al.
Published: (2020)

FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
by: Zablodskii, N. N., et al.
Published: (2013)

ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
by: Batygin, Yu. V., et al.
Published: (2018)

A calculation model for determination of impedance of power high voltage single-core cables with polymer insulation
by: Bezprozvannych, G. V., et al.
Published: (2021)

STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION
by: Golik, O. V., et al.
Published: (2017)

A STATISTICAL MODEL OF MONITORING OF INSULATION BREAKDOWN VOLTAGE STABILITY IN THE PROCESS OF ENAMELED WIRES PRODUCTION
by: Gurin, A. G., et al.
Published: (2019)

A CHOICE OF ACCEPTABLE SECTIONS OF ELECTRIC WIRES AND CABLES IN ON-BOARD CIRCUITS OF AIRCRAFT ELECTRICAL EQUIPMENT
by: Baranov, M. I.
Published: (2020)

ON THE ISSUE OF DESIGN OF GROUNDING SYSTEMS OF 330(220) KV SUBSTATIONS TO ENSURE THE ELECTROMAGNETIC COMPATIBILITY OF SECONDARY CIRCUITS
by: Glebov, O. Yu., et al.
Published: (2018)

POWERFUL HIGH-CURRENT GENERATOR OF MICROSECOND VOLTAGE PULSES WITH VOLTAGE AMPLITUDE UP TO ±2 MV AND CURRENT AMPLITUDE UP TO ±150 kA WITH ELECTRIC ENERGY STORED IN CAPACITORS UP TO 1 MJ
by: Baranov, M. I., et al.
Published: (2020)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
by: Milykh, V. I.
Published: (2023)

A CHOICE OF SECTIONS OF ELECTRIC WIRES AND CABLES IN CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT IMPULSE TECHNIQUE
by: Baranov, M. I.
Published: (2018)

EFFECT OF THE THICKNESS OF INSULATION OF PROTECTED WIRES OF HIGH-VOLTAGE OVERHEAD TRANSMISSION LINES TO THEIR CURRENT CARRYING CAPACITY
by: Bezprozvannych, G. V., et al.
Published: (2018)

CALCULATION AND EXPERIMENTAL DETERMINATION OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN THE CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT PULSE TECHNIQUE
by: Baranov, M. I.
Published: (2019)