Buchumschlag

GENERAL QUESTIONS AS TO PROVIDING ELECTROMAGNETIC COMPATIBILITY OF POWER CABLE LINES, THEIR AMPERAGE CAPACITY AND TYPES OF SHIELD CONSTRUCTION

Works studying ways of reducing magnetic fields of cross-linked polyethylene power cable lines are reviewed. Different aspects of single-phase power cable shield construction influence on thermal conditions of a three-phase power cable line are analyzed. Questions concerning electromagnetic compatib...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	Kostiukov, I. A.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Schlagworte:	eddy current loss circulating current electromagnetic compatibility 621.315.2
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.4.13
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
von: Kostiukov, I. A.
Veröffentlicht: (2014)

IMPROVING CALCULATION ACCURACY OF CURRENTS IN CABLE SHIELDS AT DOUBLE-SIDED GROUNDING OF THREE-PHASE CABLE LINE
von: Grinchenko, V. S., et al.
Veröffentlicht: (2017)

DYNAMICS OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLE HEATING
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2013)

DETERMINATION OF ANALYTICAL CALCULATION ERROR OF MAGNETIC FIELD OF HIGH-VOLTAGE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS CAUSED BY NON-UNIFORM CURRENT DISTRIBUTION IN THE SHIELDS
von: Tkachenko, A. O.
Veröffentlicht: (2017)

PROBLEMS OF ECONOMIC CRITERIA APPLICATION TO CALCULATION AND DESIGN OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLES
von: Golik, O. V.
Veröffentlicht: (2013)

Model of pulsating current traction motor taking into consideration magnetic losses in steel
von: Goolak, S., et al.
Veröffentlicht: (2021)

HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
von: Antonets, T. Yu., et al.
Veröffentlicht: (2015)

OVERLOAD CAPABILITY OF POWER CABLES IN ACTUAL POWER CONSUMPTION SYSTEMS
von: Shchebeniuk, L. A.
Veröffentlicht: (2013)

STUDY OF THE MAGNETIC FIELD OF THREE PHASE LINES OF SINGLE CORE POWER CABLES WITH TWO-END BONDING OF THEIR SHIELDS
von: Rozov, V. Yu., et al.
Veröffentlicht: (2015)

RESEARCH ON ADDED INDUCTANCE AND RESISTANCE DURING SPIRAL FERROMAGNETIC WIRE SCANNING WITH MAGNETIC FIELD OF A PARAMETRIC EDDY-CURRENT SENSOR
von: Kostiukov, I. A.
Veröffentlicht: (2014)

INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE POWER CABLES WITH XLPE INSULATION
von: Shchebeniuk, L. A., et al.
Veröffentlicht: (2016)

The mutual influence of exciting and induced currents in the circular solenoid – massive conductor system
von: Batygin, Yu. V., et al.
Veröffentlicht: (2023)

Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
von: Мягкохлеб, К. Б., et al.
Veröffentlicht: (2018)

Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
von: Мягкохлеб, К. Б., et al.
Veröffentlicht: (2018)

Estimation Method for Compatibility of Normative Documents
von: Mezentsev, O. V.
Veröffentlicht: (2014)

TECHNOLOGICAL MONITORING OF ELECTRICAL RESISTANCE OF PRESSED CABLE CONDUCTORS IN PRODUCTION CONDITIONS
von: Antonets, Y. A., et al.
Veröffentlicht: (2019)

STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
von: Golik, O. V.
Veröffentlicht: (2016)

Problems compatibility of complex analytics of scenarios and theoretical basis of its solution
von: Сенченко , В. Р.
Veröffentlicht: (2021)

DEVELOPMENT OF EXCITATION STRUCTURE RBF-METAMODELS OF MOVING CONCENTRIC EDDY CURRENT PROBE
von: Halchenko, V. Ya., et al.
Veröffentlicht: (2019)

Development of a boost-inverter converter under electromagnetic compatibility stress equipping a photovoltaic generator
von: Bechekir, S., et al.
Veröffentlicht: (2023)

Improving the operation of an asymmetric inverter with magnetically coupled inductors for energy storage systems
von: Martynov, D. V., et al.
Veröffentlicht: (2025)

Deformations of compatible Hom-mock-Lie algebras
von: Benali, Karima, et al.
Veröffentlicht: (2025)

TWO-DIMENSIONAL FEM-ANALYSIS OF EDDY CURRENTS LOSS IN LAMINATED MAGNETIC CIRCUITS
von: Makarchuk, O. V., et al.
Veröffentlicht: (2019)

EXPERIMENTAL RESEARCH ON DIELECTRIC STRENGTH OF PEEIDH-0.63 WIRE
von: Gurin, A. G., et al.
Veröffentlicht: (2013)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
von: Gnatov, A. V.
Veröffentlicht: (2012)

Experimental electromagnetic compatibility of conducted electromagnetic interferences from an IGBT and a MOSFET in the power supply
von: Lahlaci, M. E., et al.
Veröffentlicht: (2024)

ONLINE TECHNOLOGICAL MONITORING OF INSULATION DEFECTS IN ENAMELED WIRES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2017)

PROVIDING OF THE DESCRIPTION ACCURACY OF THE CHARACTERISTICS FOR GROUPS OF SOLAR PHOTOVOLTAIC CELL AND SOLAR ARRAY BASED ON TARGET EXPERIMENTS ON THE COMPLEX EQUIPMENT
von: Bezruchko, K., et al.
Veröffentlicht: (2020)

FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)

A calculation model for determination of impedance of power high voltage single-core cables with polymer insulation
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2021)

STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION
von: Golik, O. V., et al.
Veröffentlicht: (2017)

A STATISTICAL MODEL OF MONITORING OF INSULATION BREAKDOWN VOLTAGE STABILITY IN THE PROCESS OF ENAMELED WIRES PRODUCTION
von: Gurin, A. G., et al.
Veröffentlicht: (2019)

A CHOICE OF ACCEPTABLE SECTIONS OF ELECTRIC WIRES AND CABLES IN ON-BOARD CIRCUITS OF AIRCRAFT ELECTRICAL EQUIPMENT
von: Baranov, M. I.
Veröffentlicht: (2020)

ON THE ISSUE OF DESIGN OF GROUNDING SYSTEMS OF 330(220) KV SUBSTATIONS TO ENSURE THE ELECTROMAGNETIC COMPATIBILITY OF SECONDARY CIRCUITS
von: Glebov, O. Yu., et al.
Veröffentlicht: (2018)

POWERFUL HIGH-CURRENT GENERATOR OF MICROSECOND VOLTAGE PULSES WITH VOLTAGE AMPLITUDE UP TO ±2 MV AND CURRENT AMPLITUDE UP TO ±150 kA WITH ELECTRIC ENERGY STORED IN CAPACITORS UP TO 1 MJ
von: Baranov, M. I., et al.
Veröffentlicht: (2020)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)

A CHOICE OF SECTIONS OF ELECTRIC WIRES AND CABLES IN CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT IMPULSE TECHNIQUE
von: Baranov, M. I.
Veröffentlicht: (2018)

EFFECT OF THE THICKNESS OF INSULATION OF PROTECTED WIRES OF HIGH-VOLTAGE OVERHEAD TRANSMISSION LINES TO THEIR CURRENT CARRYING CAPACITY
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2018)

CALCULATION AND EXPERIMENTAL DETERMINATION OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN THE CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT PULSE TECHNIQUE
von: Baranov, M. I.
Veröffentlicht: (2019)