Cover Image

HIGH CURRENT HARMONICS INFLUENCE ON THE CHOICE OF CONDUCTORS OF CRANE POWER SUPPLY SYSTEMS

Purpose. To study the effect of high current harmonics on the power and voltage losses in the conductive lines of the crane power supply systems and the development of an account method for this influence in practical calculations. Methodology. For research analytical methods and methods of simulat...

Full description

Saved in:

Bibliographic Details
Date:	2019
Main Authors:	Andrienko, P. D., Nemykina, O. V., Andrienko, A. A.
Format:	Article
Language:	English Ukrainian
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2019
Subjects:	high harmonics voltage losses power losses conductors steel materials aluminum tires crane power systems 621.316.12
Online Access:	http://eie.khpi.edu.ua/article/view/2074-272X.2019.3.04
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

Research of operating modes of conductors in power supply systems of cranes with induction feed, taking into account the influence of higher harmonics of the current
by: Andrienko, P. D., et al.
Published: (2021)

INDUSTRIAL RESEARCH INTO HIGH HARMONIC INFLUENCE ON COMPENSATION DEVICES
by: Shklyarskiy, Y. E., et al.
Published: (2013)

JUSTIFICATION OF OPTIMAL LOCATION OF CONNECTION OF THE DISTRIBUTED GENERATION SOURCE AND VALUE OF ITS POWER
by: Kyryk, V. V., et al.
Published: (2019)

NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
by: Levin, M. I., et al.
Published: (2015)

ENERGY LOSS REDUCTION IN SMART GRID UTILITIES FOR ACCOUNT OF TRANSITION FROM SINGLE-PHASE TO THREE-PHASE POWER DISTRIBUTION SYSTEMS
by: Zhemerov, George G., et al.
Published: (2014)

A novel load shedding methodology to mitigate voltage instability in power system
by: Chappa, H., et al.
Published: (2022)

RESEARCH ON ELECTRIC POTENTIALS ALIGNMENT ON THE GROUND SURFACE WITHIN THE GROUNDING CONDUCTOR TERRITORY
by: Nizhevskyi, V. I., et al.
Published: (2014)

Features of designing high-voltage overhead power lines in an underground collector
by: Shevchenko, S. Yu., et al.
Published: (2025)

Investigation of efficient multilevel inverter for photovoltaic energy system and electric vehicle applications
by: Parimalasundar, E., et al.
Published: (2023)

INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE POWER CABLES WITH XLPE INSULATION
by: Shchebeniuk, L. A., et al.
Published: (2016)

STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
by: Vakaruk, T. V., et al.
Published: (2014)

Designing the optimal number of active branches in a multi-branch buck-boost converter
by: Kovacova, I., et al.
Published: (2025)

PHYSICAL MEANING OF THE «REACTIVE POWER» CONCEPT APPLIED TO THREE-PHASE ENERGY SUPPLY SYSTEMS WITH NON-LINEAR LOAD
by: Zhemerov, George G., et al.
Published: (2015)

APPROXIMATE CALCULATION OF BASIC CHARACTERISTICS OF PLASMA AT THE AIR ELECTRIC EXPLOSION OF METAL CONDUCTOR
by: Baranov, M. I., et al.
Published: (2017)

ANALYSIS OF THE IMPACT OF DISTRIBUTED GENERATION ON NETWORK OPERATING PARAMETERS
by: Samkov , O., et al.
Published: (2025)

Optimal size and location of distributed generations in distribution networks using bald eagle search algorithm
by: Tebbakh, N., et al.
Published: (2022)

The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
by: Vasko, P., et al.
Published: (2016)

TECHNOLOGICAL MONITORING OF ELECTRICAL RESISTANCE OF PRESSED CABLE CONDUCTORS IN PRODUCTION CONDITIONS
by: Antonets, Y. A., et al.
Published: (2019)

Reactive power optimization in distribution systems considering load levels for economic benefit maximization
by: Srinivasan, G., et al.
Published: (2023)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
by: Petrenko, A. N., et al.
Published: (2012)

COMPONENTS OF THE TOTAL POWER LOSSES IN THREE-PHASE ENERGY SUPPLY SYSTEMS WITH SYMMETRIC SINUSOIDAL VOLTAGE SOURCE
by: Zhemerov, George G., et al.
Published: (2015)

Optimal placement and sizing of distributed generation units in distribution networks using an enhanced particle swarm optimization framework
by: Al Soudi, M., et al.
Published: (2026)

Enhanced siting and sizing of distributed generation in radial distribution networks under load demand uncertainty using a hybrid metaheuristic framework
by: Sabry, S. S., et al.
Published: (2025)

REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
by: Popovych , O., et al.
Published: (2025)

THREE-PHASE ENERGY SUPPLY SYSTEMS SIMULATION FOR THE TOTAL POWER LOSSES COMPONENTS ASSESSMENT
by: Tugay, D. V.
Published: (2016)

MONITORING OF ELECTRICAL ENERGY QUALITY ON THE TRACTION SUBSTATION INPUT
by: Gryb, O. G., et al.
Published: (2015)

COMPONENTS OF TOTAL ELECTRIC ENERGY LOSSES POWER IN PQR SPATIAL COORDINATES
by: Zhemerov, George G., et al.
Published: (2016)

ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
by: Chenchevoi, V., et al.
Published: (2017)

Harmonics suppression in high-speed railway via single-phase traction converter with an LCL filter using fuzzy logic control strategy
by: Aissaoui, M., et al.
Published: (2024)

APPLICATION OF HIGH VOLTAGE DIVIDERS FOR POWER QUALITY INDICES MEASUREMENT
by: Anokhin, Y. L., et al.
Published: (2017)

Protection of workers against the magnetic field of 330-750 kV overhead power lines when performing work without removing the voltage under load
by: Rozov, V. Yu., et al.
Published: (2024)

Refined calculation of energy modes of a frequency-regulated induction motor
by: Volkov, V. A., et al.
Published: (2024)

Optimization of loading modes of a controlled asynchronous electric drive
by: Kanov, L. N.
Published: (2013)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
by: Shurub, Yu. V., et al.
Published: (2020)

Simulation-based analysis of dynamic voltage restorer with sliding mode controller at optimal voltage for power quality enhancement in distribution system
by: Zahra, S. T., et al.
Published: (2022)

Optimal hybrid photovoltaic distributed generation and distribution static synchronous compensators planning to minimize active power losses using adaptive acceleration coefficients particle swarm optimization algorithms
by: Labed, M. A., et al.
Published: (2023)

Energy efficiency of a 3-level shunt active power filter powered by a fuel-cell / battery DC bus with regulated duty cycles
by: Bourouis, B., et al.
Published: (2021)

AVERAGE GEOMETRICAL FEATURES OF THE ELECTRON WAVE PACKAGES DISTRIBUTION IN METALLIC CONDUCTORS WITH PULSED AXIAL CURRENT OF HIGH DENSITY
by: Baranov, M. I., et al.
Published: (2016)

MODELING OF PV MODULE CURRENT-VOLTAGE CHARACTERISTIC WITH VARIATIVE IDEALITY FACTOR AND REVERSE SATURATION CURRENT
by: Ivanchuk , V., et al.
Published: (2024)

COMPENSATION OF REACTIVE POWER BY INDUSTRIAL SOLAR POWER PLAT AND INFLUENCE OF THIS PROCESS ON THE CENTRAL ELECTRIC NETWORK
by: Bordakov, М.
Published: (2019)