SYNTHESIS AND ANALYSIS OF ARC FURNACE ELECTRICAL MODE CONTROL SYSTEM ON THE BASIS OF THREE-DIMENSIONAL PHASE CURRENTS VECTOR DISTRIBUTION
Goal. The purpose of the article is to create the method for the operative synthesis of an arc steel-melting furnace (ASF) electric mode (EM) control signal on the basis of a three-dimensional arc currents vector, which takes into account the stochastic nature of the processes in the melting space a...
Gespeichert in:
| Datum: | 2019 |
|---|---|
| Hauptverfasser: | Lozynskyi, O. Y., Lozynskyi, A. O., Paranchuk, Y. S., Paranchuk, R. Y. |
| Format: | Artikel |
| Sprache: | Englisch Ukrainisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2019
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/2074-272X.2019.4.04 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
RESEARCH OF ARC FURNACE ELECTRICAL MODE WITH A FUZZY CONTROL MODEL
von: Paranchuk, Y. S., et al.
Veröffentlicht: (2020)
von: Paranchuk, Y. S., et al.
Veröffentlicht: (2020)
DEVELOPMENT OF METHODS AND MEANS OF COMPUTER SIMULATION FOR STUDYING ARC FURNACE ELECTRIC MODES
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018)
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018)
MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)
von: Khrestin, R. N.
Veröffentlicht: (2015)
Resource-Saving Continuous Optical Control of Liquid Metal Temperature in Metallurgy of Energy Machine Building
von: Zhukov, Leonid, et al.
Veröffentlicht: (2023)
von: Zhukov, Leonid, et al.
Veröffentlicht: (2023)
Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: Gubinskii M.V., et al.
Veröffentlicht: (2017)
von: Gubinskii M.V., et al.
Veröffentlicht: (2017)
Electromechanical guidance system based on a fuzzy proportional-plus-differential position controller
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)
Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)
Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)
STRUCTURAL SEPARATION OF PROCESSES IN A THREE-PHASE FOUR-WIRE CIRCUIT AND NEUTRAL CURRENT COMPENSATION
von: Sirotin, Iu. A.
Veröffentlicht: (2012)
von: Sirotin, Iu. A.
Veröffentlicht: (2012)
A NEW ROBUST CONTROL USING ADAPTIVE FUZZY SLIDING MODE CONTROL FOR A DFIG SUPPLIED BY A 19-LEVEL INVERTER WITH LESS NUMBER OF SWITCHES
von: Benkahla, Mohamed, et al.
Veröffentlicht: (2018)
von: Benkahla, Mohamed, et al.
Veröffentlicht: (2018)
Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)
von: Tran, C. D., et al.
Veröffentlicht: (2024)
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
Formation and implementation of analytical scenarios in tasks of three-dimensional modeling
von: Dodonov, A. G., et al.
Veröffentlicht: (2020)
von: Dodonov, A. G., et al.
Veröffentlicht: (2020)
Smart current control of the wind energy conversion system based permanent magnet synchronous generator using predictive and hysteresis model
von: Zine, H. K. E., et al.
Veröffentlicht: (2024)
von: Zine, H. K. E., et al.
Veröffentlicht: (2024)
Optimal control of the electrical mode of an arc furnace on the basis of the three-dimensional vector of phase currents
von: O. Lozynskyi, et al.
Veröffentlicht: (2019)
von: O. Lozynskyi, et al.
Veröffentlicht: (2019)
SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM
von: Glaoui, Hachemi, et al.
Veröffentlicht: (2018)
von: Glaoui, Hachemi, et al.
Veröffentlicht: (2018)
FEATURES OF ELECTRODE MELTING IN ARC WELDING OF STEELS
von: Sydorets, V. N., et al.
Veröffentlicht: (2013)
von: Sydorets, V. N., et al.
Veröffentlicht: (2013)
Robust adaptive fuzzy type-2 fast terminal sliding mode control of robot manipulators in attendance of actuator faults and payload variation
von: Rahali, H., et al.
Veröffentlicht: (2025)
von: Rahali, H., et al.
Veröffentlicht: (2025)
Model of pulsating current traction motor taking into consideration magnetic losses in steel
von: Goolak, S., et al.
Veröffentlicht: (2021)
von: Goolak, S., et al.
Veröffentlicht: (2021)
ORTHOGONAL COMPONENTS OF THE THREE-PHASE CURRENT AT ASYMMETRICAL ACTIVE - REACTIVE LOAD IN 4-WIRE CIRCUIT
von: Sirotin, Iu. A.
Veröffentlicht: (2016)
von: Sirotin, Iu. A.
Veröffentlicht: (2016)
Hygienic characteristics of welding methods and welding materials
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)
STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)
The efficiency of the active controlled rectifier operation in the mains voltage distortion mode
von: Krylov, D. S., et al.
Veröffentlicht: (2021)
von: Krylov, D. S., et al.
Veröffentlicht: (2021)
Photovoltaic fault diagnosis algorithm using fuzzy logic controller based on calculating distortion ratio of values
von: Lahiouel, Y., et al.
Veröffentlicht: (2023)
von: Lahiouel, Y., et al.
Veröffentlicht: (2023)
Sliding mode approach for control and observation of a three phase AC-DC pulse-width modulation rectifier
von: Sakri, D., et al.
Veröffentlicht: (2023)
von: Sakri, D., et al.
Veröffentlicht: (2023)
PROVIDING OF THE DESCRIPTION ACCURACY OF THE CHARACTERISTICS FOR GROUPS OF SOLAR PHOTOVOLTAIC CELL AND SOLAR ARRAY BASED ON TARGET EXPERIMENTS ON THE COMPLEX EQUIPMENT
von: Bezruchko, K., et al.
Veröffentlicht: (2020)
von: Bezruchko, K., et al.
Veröffentlicht: (2020)
Adaptive finite-time synergetic control for flexible-joint robot manipulator with disturbance inputs
von: Nguyen, X. C., et al.
Veröffentlicht: (2025)
von: Nguyen, X. C., et al.
Veröffentlicht: (2025)
Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
von: Laamari, Y., et al.
Veröffentlicht: (2025)
von: Laamari, Y., et al.
Veröffentlicht: (2025)
MODELING OF PUMPED HYDRO STORAGE STATION IN GENERATOR MODE PARALLEL WITH WIND POWER PLANT ON AUTONOMOUS ENERGY SYSTEM
von: Verbovij, A.
Veröffentlicht: (2021)
von: Verbovij, A.
Veröffentlicht: (2021)
Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
von: Oualah, O., et al.
Veröffentlicht: (2022)
von: Oualah, O., et al.
Veröffentlicht: (2022)
Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)
ERROR ELIMINATION FOR CURRENT CONTROL LOOP FOR MULTI-FUNCTIONAL SINGLE-PHASE GRID-CONNECTED INVERTER
von: Shavelkin, O. O., et al.
Veröffentlicht: (2019)
von: Shavelkin, O. O., et al.
Veröffentlicht: (2019)
CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING
von: Podoltsev, A. D., et al.
Veröffentlicht: (2018)
von: Podoltsev, A. D., et al.
Veröffentlicht: (2018)
Designing of the specialized computer system for making pulmonology diagnosis
von: Komlevaya, N.O., et al.
Veröffentlicht: (2025)
von: Komlevaya, N.O., et al.
Veröffentlicht: (2025)
Inverter fuzzy speed control of multi-machine system series-connected fed by a single five-phase an asymmetrical 19-level inverter with less number of switches
von: Bessaad, T., et al.
Veröffentlicht: (2025)
von: Bessaad, T., et al.
Veröffentlicht: (2025)
Investigation of the Electrodes Movement System of Arc Furnace Fuzzy Controller
von: A. O. Lozynskyi, et al.
Veröffentlicht: (2014)
von: A. O. Lozynskyi, et al.
Veröffentlicht: (2014)
COMPARATIVE ANALYSIS OF ELECTRICAL AND THERMAL CONTROL OF THE LINING STATE OF INDUCTION APPARATUS OF COPPER WIRE MANUFACTURE
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2018)
INSTANTANEOUS AND INTEGRAL POWER EQUATIONS OF NONSINUSOIDAL 3-PHASE PROCESSES
von: Sirotin, Iu. A., et al.
Veröffentlicht: (2016)
von: Sirotin, Iu. A., et al.
Veröffentlicht: (2016)
EQUIVALENT CIRCUITS OF A SYNCHRONOUS GENERATOR IN A VARIABLE-SPEED WIND TURBINE FOR POWERING A REVERSE OSMOSIS WATER DESALINATION PROCESS LINE
von: Vasko , P., et al.
Veröffentlicht: (2026)
von: Vasko , P., et al.
Veröffentlicht: (2026)
REACTIVE POWER CONTROL IN MICRO-GRID NETWORKS USING ADAPTIVE CONTROL
von: Moghayadniya, A., et al.
Veröffentlicht: (2019)
von: Moghayadniya, A., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
RESEARCH OF ARC FURNACE ELECTRICAL MODE WITH A FUZZY CONTROL MODEL
von: Paranchuk, Y. S., et al.
Veröffentlicht: (2020) -
DEVELOPMENT OF METHODS AND MEANS OF COMPUTER SIMULATION FOR STUDYING ARC FURNACE ELECTRIC MODES
von: Lozynskyi, O. Y., et al.
Veröffentlicht: (2018) -
MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015) -
Resource-Saving Continuous Optical Control of Liquid Metal Temperature in Metallurgy of Energy Machine Building
von: Zhukov, Leonid, et al.
Veröffentlicht: (2023) -
Enhancement of the energy efficiency of electric steelmaking processes by means of natural gas conversion with the exhaust gases of an arc furnace
von: Gubinskii M.V., et al.
Veröffentlicht: (2017)