Buchumschlag

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.

Designing features for valve-engine transducers of brushless synchronous and asynchronized machines are described. Global analysis of research results on the transducer models in a MicroCap circuit simulation system is made, recommendations on the simulation system application in both scientific res...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
1. Verfasser:	Galinovskiy, A. M.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Schlagworte:	asynchronized machines transducer exciter armature winding Micro Cap circuit simulation system 621.313.333
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.5.05
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

REVERSIBLE THYRISTOR CONVERTERS OF BRUSHLESS SYNCHRONOUS COMPENSATERS
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2013)

REGULARITIES OF ELECTROMAGNETIC PROCESSES OF A CONTACTLESS EXCITATION SYSTEM OF AN ASYNCHRONIZED GENERATOR BASED ON A CASCADE THREE-PHASE-THREE-PHASE VOLTAGE MODULATOR IN A SINGLE-STAR CIRCUIT
von: Vasyliv, K. M.
Veröffentlicht: (2018)

DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)

Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
von: Malyar, V. S., et al.
Veröffentlicht: (2012)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

A 2-pole winding development technique for asynchronous machines with increased number of parallel branches
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

Optimization of loading modes of a controlled asynchronous electric drive
von: Kanov, L. N.
Veröffentlicht: (2013)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

A COMPARATIVE ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT UNDER ACTIVE-INDUCTIVE LOADING
von: Vasyliv, K. M.
Veröffentlicht: (2013)

RESONANT PROCESSES IN STARTING MODES OF SYNCHRONOUS MOTORS WITH CAPACITORS IN THE EXCITATION WINDINGS CIRCUIT
von: Malyar, V. S., et al.
Veröffentlicht: (2017)

A REVERSE MODE OF THREE-PHASE ASYNCHRONOUS MOTORS WITH HEXAPHASE WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

PHASE METHOD OF DETECTING BREAKS IN STATOR WINDINGS OF ASYNCHRONOUS MOTORS
von: Yenikieiev, Olexander, et al.
Veröffentlicht: (2024)

VALVE INDUCTION GENERATORS OF RADIAL EXCITATION WITH COMBINED WINDINGS
von: Lushchik, V. D.
Veröffentlicht: (2014)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

APPROXIMATE SUBSTITUTION ELECTRICAL ЕQUIVALENT CIRCUIT OF EXPLICIT POLE SYNCHRONOUS GENERATOR FOR ANALYSIS OF LOADING OPERATING MODES AUTONOMOUS WIND-ELECTRIC AND HYDROELECTRIC INSTALLATIONS
von: Vasko, P.
Veröffentlicht: (2020)

ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT WITH A COMMON MODULATOR PHASE CONNECTION UNDER OPERATION TO AN INDUCTION MOTORS SITE
von: Vasyliv, K. M.
Veröffentlicht: (2013)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

ELECTROMAGNETIC CALCULATION OF THREE-PHASE ASYNCHRONOUS MOTORS WITH A SIX-PHASE WINDING
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

Adding effect of current displacement and magnetic circuit saturation in an asynchronous motor mathematical model
von: Tsodik, I. A., et al.
Veröffentlicht: (2014)

AN ARMATURE WINDING PARAMETER CALCULATION TECHNIQUE FOR AN AUTOMOTIVE COMPOSITELY EXCITED GENERATOR
von: Petrenko, A. N.
Veröffentlicht: (2014)

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Algorithm for calculating synchronous end design generators with located at stator ends two magnetic systems for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2016)

REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
von: Malyar, V. S., et al.
Veröffentlicht: (2013)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2014)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

THE CAPACITIVE STORAGE DEVICE IN THE CIRCUIT OF SYNCHRONOUS MOTOR EXCITATION FOR THE FIELD FORCING AND DISCHARGE
von: Slobodeniuk, D. V., et al.
Veröffentlicht: (2015)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

TURBOGENERATOR ROTOR HEATING IN PRESENCE OF ROTOR WINDING DEFECTS AND EXCITATION CURRENT FORCING
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2020)

A MATHEMATICAL MODEL OF AN ELECTROMECHANICAL TRANSDUCER FOR ELECTRIC VEHICLE SHOCK ABSORBER
von: Sergienko, A. N., et al.
Veröffentlicht: (2012)

DYNAMIC REGIMES OF ASYNCHRONOUS MOTORS WITH CONCATENATED CAPACITORS
von: Malyar, V. S., et al.
Veröffentlicht: (2015)

DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2019)

Development of methods for adapting the parameters of spatial end winding sections in 2D circuit-field models of induction-synchronous electric machines
von: Kotsur, M. I.
Veröffentlicht: (2024)

STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
von: Vakaruk, T. V., et al.
Veröffentlicht: (2014)

CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)