Buchumschlag

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR

Purpose. The purpose of this paper is to include comparison of results of the modeling and calculation in the Mentor Siemens software MotorSolve and experiment of the brushless permanent magnet motor. Methodology. Numerical investigation using licensed software MotorSolve is performed. Calculations...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2019
Hauptverfasser:	Rymsha, V. V., Radimov, I. N., Gulyy, M. V., Merkulov, I. V.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2019
Schlagworte:	brushless permanent magnet motor stator winding data experimental investigations 621.313.333
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2019.5.03
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

ANALYSIS OF THERMAL STATE OF TRACTION BRUSHLESS PERMANENT MAGNET MOTOR FOR MINE ELECTRIC LOCOMOTIVE
von: Matyuschenko, A. V.
Veröffentlicht: (2016)

REVERSIBLE THYRISTOR CONVERTERS OF BRUSHLESS SYNCHRONOUS COMPENSATERS
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2013)

MODELING OF OPERATION OF COAXIAL-LINEAR MOTORS WITH AXIAL AND RADIAL DIRECTIONS OF MAGNETIZATION OF PERMANENT MAGNETS IN DYNAMIC MODE
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

Mitigation of cogging torque in surface permanent magnet brushless DC motor using slot opening shift
von: Patel, A. N., et al.
Veröffentlicht: (2026)

MATHEMATICAL FIELD MODELS OF BRUSHLESS DC MOTORS WITH PERMANENT MAGNETS AND THEIR COMPARATIVE ANALYSIS
von: Matyuschenko, A. V.
Veröffentlicht: (2015)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
von: Galinovskiy, A. M.
Veröffentlicht: (2013)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

Mathematical modeling of electromechanical processes in a brushless DC motor
von: Tkachuk, V. I., et al.
Veröffentlicht: (2014)

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)

APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2014)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)

ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
von: Oshurbekov, S. Kh., et al.
Veröffentlicht: (2020)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

REGULARITIES OF ELECTROMAGNETIC PROCESSES OF A CONTACTLESS EXCITATION SYSTEM OF AN ASYNCHRONIZED GENERATOR BASED ON A CASCADE THREE-PHASE-THREE-PHASE VOLTAGE MODULATOR IN A SINGLE-STAR CIRCUIT
von: Vasyliv, K. M.
Veröffentlicht: (2018)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
von: Petrushin, V. S., et al.
Veröffentlicht: (2019)

SCREENING MAGNETIC FIELDS OF THE POWER FREQUENCY BY THE WALLS OF HOUSES
von: Pelevin, D. Ye.
Veröffentlicht: (2015)

COMPARISON OF PARAMETERS OF ASYNCHRONOUS AND SYNCHRONOUS ELECTRIC GENERATORS WITH PERMANENT MAGNETS EXCITATION FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2021)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)

OPERATION OF PERMANENT MAGNET SYNCHRONOUS GENERATOR APPLIED TO THE GRID CONNECTED WIND TURBINES
von: Permynov, Yu., et al.
Veröffentlicht: (2022)

BRUSHLESS VALVE ELECTRIC DRIVE WITH MINIMUM EQUIPMENT EXCESS FOR AUTONOMOUS FLOATING VEHICLE
von: Volyanskaya, Ya. B., et al.
Veröffentlicht: (2017)

METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)

Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
von: Merlin Suba, G., et al.
Veröffentlicht: (2022)

COMPARISON OF TRADITIONAL PERMANENT MAGNET GENERATOR AND AXIAL FLUX PERMANENT MAGNET GENERATOR WITH DOUBLE-SIDED ACTIVE SURFACE FOR WIND TURBINE
von: Golovko, V., et al.
Veröffentlicht: (2018)

Optimization of loading modes of a controlled asynchronous electric drive
von: Kanov, L. N.
Veröffentlicht: (2013)

Super-twisting sliding mode control for brushless doubly fed reluctance generator based on wind energy conversion system
von: Oualah, O., et al.
Veröffentlicht: (2023)

INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
von: Lobov, V. I., et al.
Veröffentlicht: (2016)

Development of the heat generator calculation method with permanent magnets for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2017)

MODELING OF TRACTION SYNCHRONOUS PERMANENT MAGNET MOTOR MODES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)