COMPARISON OF ENERGY CONSUMPTION OF VARIOUS ELECTRICAL MOTORS OPERATING IN A PUMPING UNIT
Purpose. Comparative analysis of energy consumption of various types electric motors in fixed speed centrifugal industrial pump applications is carried out. The purpose of the analysis is to choose the most efficient motor in the considered application. It is assumed that hydraulic flow of the pump...
Saved in:
| Date: | 2020 |
|---|---|
| Main Authors: | Goman, V. V., Oshurbekov, S. Kh., Kazakbaev, V. M., Prakht, V. A., Dmitrievskii, V. A. |
| Format: | Article |
| Language: | English Ukrainian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2020
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2020.1.03 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
Analysis of the payback period of a modernized pump unit with induction electric motors of advanced energy efficiency classes
by: Goman, V.V., et al.
Published: (2021)
by: Goman, V.V., et al.
Published: (2021)
ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
by: Oshurbekov, S. Kh., et al.
Published: (2020)
by: Oshurbekov, S. Kh., et al.
Published: (2020)
Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
by: Liubarskyi, B. G., et al.
Published: (2021)
by: Liubarskyi, B. G., et al.
Published: (2021)
A MATHEMATICAL MODEL OF THE ELECTRICAL ENGINEERING COMPLEX FOR DRIVE OF MAIN CIRCULATION PUMPS OF NUCLEAR REACTOR VVER-1000 OF NUCLEAR POWER PLANTS
by: Vasyliv, K. M., et al.
Published: (2019)
by: Vasyliv, K. M., et al.
Published: (2019)
DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
by: Permynov, Y., et al.
Published: (2019)
by: Permynov, Y., et al.
Published: (2019)
Evaluation of the efficiency of heat pumps for heating using cycle’s method
by: Kudelya, P., et al.
Published: (2016)
by: Kudelya, P., et al.
Published: (2016)
FORMATION OF CHARACTERISTICS OF OPERATING MODES OF SWITCHED RELUCTANCE MOTORS WITH PERIODIC LOAD
by: Bibik, O. V., et al.
Published: (2019)
by: Bibik, O. V., et al.
Published: (2019)
Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
by: Malyar, V. S., et al.
Published: (2012)
by: Malyar, V. S., et al.
Published: (2012)
COMPARISON OF PARAMETERS OF ASYNCHRONOUS AND SYNCHRONOUS ELECTRIC GENERATORS WITH PERMANENT MAGNETS EXCITATION FOR WIND TURBINES
by: Permynov, Y., et al.
Published: (2021)
by: Permynov, Y., et al.
Published: (2021)
RENEWABLE ENERGY SOURCES IN HEAT PUMPS FOR ENERGY EFFICIENT LOW-TEMPERATURE DRYING OF SEED GRAIN
by: Sniezhkin , Yu., et al.
Published: (2025)
by: Sniezhkin , Yu., et al.
Published: (2025)
MODELING THE OPERATION OF A HYDRO–ACCUMULATING POWER PLANT IN THE PUMP MODE AT POWER SUPPLY FROM THE WIND POWER PLANT
by: Verbovij, А.
Published: (2019)
by: Verbovij, А.
Published: (2019)
Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
by: Senani, F., et al.
Published: (2025)
by: Senani, F., et al.
Published: (2025)
MODELING OF SYSTEMS WITH THE PHOTOVOLTAIC POWER SOURCE AND WATER PUMPS
by: Bondarenko , D.
Published: (2024)
by: Bondarenko , D.
Published: (2024)
MODERN APPROACHES TO THE SOLUTION OF THE PROBLEM OF INCREASING THE ENERGY EFFICIENCY OF SEED GRAIN DRYING
by: Pazіuk, V.
Published: (2021)
by: Pazіuk, V.
Published: (2021)
Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
by: Guezi, A., et al.
Published: (2022)
by: Guezi, A., et al.
Published: (2022)
Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
by: Djafer, L., et al.
Published: (2025)
by: Djafer, L., et al.
Published: (2025)
A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP
by: Voloshko, A. V., et al.
Published: (2016)
by: Voloshko, A. V., et al.
Published: (2016)
COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020)
by: Prakht, V. A., et al.
Published: (2020)
INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
by: Lobov, V. I., et al.
Published: (2016)
by: Lobov, V. I., et al.
Published: (2016)
AIRGAP MAGNETIC INDUCTION DISTRIBUTION IN A COAXIALLY-LINEAR SYNCHRONOUS MOTOR WITH AXIAL AND RADIAL DIRECTION OF THE RUNNER PERMANENT MAGNETS MAGNETIZATION
by: Golenkov, G. M., et al.
Published: (2013)
by: Golenkov, G. M., et al.
Published: (2013)
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
by: Petrushin, V. S., et al.
Published: (2012)
by: Petrushin, V. S., et al.
Published: (2012)
Operative conditions and attainable volumes of using heat pumps at heat and power plants in the Integrated Power System of Ukraine
by: Kulyk М.M., et al.
Published: (2014)
by: Kulyk М.M., et al.
Published: (2014)
Possibility of cooling the rotor of an electric traction motor by bidirectional air flows
by: Shlyk, S., et al.
Published: (2026)
by: Shlyk, S., et al.
Published: (2026)
MODELING OF TRACTION SYNCHRONOUS PERMANENT MAGNET MOTOR MODES
by: Vaskovskyi, Yu. M., et al.
Published: (2013)
by: Vaskovskyi, Yu. M., et al.
Published: (2013)
ENERGY EFFICIENCY OF WIND-HYDRO PUMPING STATION SIGNIFICANT POWER
by: Vasko, P., et al.
Published: (2020)
by: Vasko, P., et al.
Published: (2020)
Energy consumption of measures on the environment protection as a component of the total energy consumption of production
by: Stanytsina V.V.
Published: (2011)
by: Stanytsina V.V.
Published: (2011)
HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
by: Shurub, Yu. V., et al.
Published: (2020)
by: Shurub, Yu. V., et al.
Published: (2020)
Technical and economic indicators of thermal energy technologies operated in maneuvering modes
by: Kobernik V.S.
Published: (2021)
by: Kobernik V.S.
Published: (2021)
STUDYING THE EFFECT OF AN ADDITIONAL ACTIVE RESISTANCE IN THE FIELD WINDING CIRCUIT ON STARTING CHARACTERISTICS OF SALIENT-POLE SYNCHRONOUS MOTORS
by: Malyar, V. S., et al.
Published: (2018)
by: Malyar, V. S., et al.
Published: (2018)
EFFICIENCY OF USING RENEWABLE ENERGY SOURCES FOR POWER SUPPLY OF WATER LIFTING PUMPING SYSTEMS
by: Popovych , O.
Published: (2026)
by: Popovych , O.
Published: (2026)
Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
by: Laamari, Y., et al.
Published: (2025)
by: Laamari, Y., et al.
Published: (2025)
A new stator flow-oriented control method based on type-2 fuzzy logic controllers for permanent magnet synchronous motors
by: Tabbakh, M., et al.
Published: (2026)
by: Tabbakh, M., et al.
Published: (2026)
Adaptive deep reinforcement learning-based control strategy for high-performance permanent magnet synchronous motor drive systems
by: Dukkipati, S., et al.
Published: (2026)
by: Dukkipati, S., et al.
Published: (2026)
The influence of the design of the stator winding of a synchronous-reactive generator on increasing its energy efficiency
by: Iegorov, O. B., et al.
Published: (2025)
by: Iegorov, O. B., et al.
Published: (2025)
Estimation of the production and consumption of heat energy in Ukraine under the use of electric energy by heat pump systems
by: Bilodid V.D.
Published: (2011)
by: Bilodid V.D.
Published: (2011)
Algorithm for calculating synchronous end design generators with located at stator ends two magnetic systems for wind turbines
by: Permynov, Y., et al.
Published: (2016)
by: Permynov, Y., et al.
Published: (2016)
OPERATION OF PERMANENT MAGNET SYNCHRONOUS GENERATOR APPLIED TO THE GRID CONNECTED WIND TURBINES
by: Permynov, Yu., et al.
Published: (2022)
by: Permynov, Yu., et al.
Published: (2022)
REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
by: Malyar, V. S., et al.
Published: (2013)
by: Malyar, V. S., et al.
Published: (2013)
Computer-aided Design of Centrifugal Pump Hydraulics
by: Косторной, А. С.
Published: (2015)
by: Косторной, А. С.
Published: (2015)
Computer-aided Design of Centrifugal Pump Hydraulics
by: Косторной, А. С.
Published: (2015)
by: Косторной, А. С.
Published: (2015)
Similar Items
-
Analysis of the payback period of a modernized pump unit with induction electric motors of advanced energy efficiency classes
by: Goman, V.V., et al.
Published: (2021) -
ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
by: Oshurbekov, S. Kh., et al.
Published: (2020) -
Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
by: Liubarskyi, B. G., et al.
Published: (2021) -
A MATHEMATICAL MODEL OF THE ELECTRICAL ENGINEERING COMPLEX FOR DRIVE OF MAIN CIRCULATION PUMPS OF NUCLEAR REACTOR VVER-1000 OF NUCLEAR POWER PLANTS
by: Vasyliv, K. M., et al.
Published: (2019) -
DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
by: Permynov, Y., et al.
Published: (2019)