Buchumschlag

PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS

Causes of premature failure of medium-power two-pole induction motor windings after the windings first repair are revealed. Recommendations for the medium-power two-pole induction motor winding reliability improvement are given.

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	Lushchik, V. D., Polezіn, S. Yu., Antipko, G. S.
Format:	Artikel
Sprache:	Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2013
Schlagworte:	induction motor winding premature failure reliability repair 621.313.3
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2013.6.06
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

ELECTROMAGNETIC CALCULATION OF THREE-PHASE ASYNCHRONOUS MOTORS WITH A SIX-PHASE WINDING
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

A REVERSE MODE OF THREE-PHASE ASYNCHRONOUS MOTORS WITH HEXAPHASE WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

ANALYSIS OF METHODS AND ALGORITHMS FOR STUDYING THE REGIME RELIABILITY OF POWER SYSTEMS IN CONDITIONS OF CASCADE FAILURE PROGRESSION
von: Bardyk, Ye., et al.
Veröffentlicht: (2023)

VALVE INDUCTION GENERATORS OF RADIAL EXCITATION WITH COMBINED WINDINGS
von: Lushchik, V. D.
Veröffentlicht: (2014)

Approaches to study the reliability of wind power station
von: Mateyenko, Y., et al.
Veröffentlicht: (2016)

A truck’s starter motor with a nonsalient-pole stator
von: Lushchik, V. D., et al.
Veröffentlicht: (2012)

Model of two-component system with component deactivation by hidden failure control
von: Обжерин, Юрий Евгеньевич, et al.
Veröffentlicht: (2014)

Model of two-component system with component deactivation by hidden failure control
von: Обжерин, Юрий Евгеньевич, et al.
Veröffentlicht: (2014)

FEATURES OF ELECTRIC MOTOR CHOICE FOR NUCLEAR POWER PLANT TECHNOLOGICAL OBJECTS
von: Pavlenko, T. P., et al.
Veröffentlicht: (2013)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)

STUDYING THE EFFECT OF AN ADDITIONAL ACTIVE RESISTANCE IN THE FIELD WINDING CIRCUIT ON STARTING CHARACTERISTICS OF SALIENT-POLE SYNCHRONOUS MOTORS
von: Malyar, V. S., et al.
Veröffentlicht: (2018)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
von: Bondar, R. P.
Veröffentlicht: (2014)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

OPERATIONAL RELIABILITY ANALYSIS FOR SUSTAINABLE ENERGY SYSTEM PLANNING DEVELOPMENT
von: Bardyk , Ye., et al.
Veröffentlicht: (2024)

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
von: Nayli, A., et al.
Veröffentlicht: (2026)

FUZZY-STATISTICAL MODELLING OF OVERHEAD LINES FOR ESTIMATING THE FAILURE PROBABILITY IN THE TASKS OF ANALYSING THE POWER SYSTEMS OPERATIONAL RISK
von: Bardyk , Ye., et al.
Veröffentlicht: (2025)

Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025)

A 2-pole winding development technique for asynchronous machines with increased number of parallel branches
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

Refined calculation of energy modes of a frequency-regulated induction motor
von: Volkov, V. A., et al.
Veröffentlicht: (2024)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
von: Lobov, V. I., et al.
Veröffentlicht: (2017)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)

DISTRIBUTION OF MAGNETIC INDUCTION LINEAR SYNCHRONUS MOTOR WITH MAGNETIC SUSPENSION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

Fault-tolerant control of a double star induction machine operating in active redundancy
von: Guizani, S., et al.
Veröffentlicht: (2025)

INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2012)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Frequency experimental identification approach for single-phase induction motor common-mode parameters
von: Hakmi, Y., et al.
Veröffentlicht: (2024)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)

RESONANT PROCESSES IN STARTING MODES OF SYNCHRONOUS MOTORS WITH CAPACITORS IN THE EXCITATION WINDINGS CIRCUIT
von: Malyar, V. S., et al.
Veröffentlicht: (2017)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)

Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)

MECHANICAL CHARACTERISTICS OF THREE-PHASE INDUCTION MOTORS WITH SINGLE-PHASE POWER SUPPLY
von: Malyar, V. S., et al.
Veröffentlicht: (2016)