COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
Purpose. Single-phase machines with permanent magnets on the rotor are widely used in a variety of applications of a low rated power. When these machines are applied in high-speed applications, a retaining ring on the rotor core must be often used. However, it makes the assembly more complex and the...
Saved in:
| Date: | 2020 |
|---|---|
| Main Authors: | Prakht, V. A., Dmitrievskii, V. A., Kazakbaev, V. M., Oshurbekov, S. Kh. |
| Format: | Article |
| Language: | English Ukrainian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2020
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/2074-272X.2020.2.03 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
by: Permynov, Y., et al.
Published: (2018)
by: Permynov, Y., et al.
Published: (2018)
PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
by: Ben Slimene, Marwa
Published: (2020)
by: Ben Slimene, Marwa
Published: (2020)
Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
by: Loveykin, V.S., et al.
Published: (2019)
by: Loveykin, V.S., et al.
Published: (2019)
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, A.S., et al.
Published: (2019)
by: Koliadiuk, A.S., et al.
Published: (2019)
Vibration Features of Titanium Alloy Blades with Erosive Damages
by: Vorobiov, Yu.S., et al.
Published: (2018)
by: Vorobiov, Yu.S., et al.
Published: (2018)
Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
by: Miroshnikov, V.Yu.
Published: (2019)
by: Miroshnikov, V.Yu.
Published: (2019)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
by: Zaytsev, B.F., et al.
Published: (2018)
by: Zaytsev, B.F., et al.
Published: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
by: Fridman, M.M.
Published: (2018)
by: Fridman, M.M.
Published: (2018)
Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction
by: Kovalchuk, S.B., et al.
Published: (2018)
by: Kovalchuk, S.B., et al.
Published: (2018)
Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
by: Kovalchuk, S.B., et al.
Published: (2019)
by: Kovalchuk, S.B., et al.
Published: (2019)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 1. Experimental Procedure
by: Degtyarev, M.A., et al.
Published: (2019)
by: Degtyarev, M.A., et al.
Published: (2019)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
by: Degtyarev, M.A., et al.
Published: (2019)
by: Degtyarev, M.A., et al.
Published: (2019)
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
by: Shulzhenko, N.G., et al.
Published: (2018)
by: Shulzhenko, N.G., et al.
Published: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
by: Biblik, I.V., et al.
Published: (2018)
by: Biblik, I.V., et al.
Published: (2018)
Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
by: Kairov, A.S., et al.
Published: (2018)
by: Kairov, A.S., et al.
Published: (2018)
Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
by: Larbi, B., et al.
Published: (2023)
by: Larbi, B., et al.
Published: (2023)
Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
by: Kimouche, A., et al.
Published: (2024)
by: Kimouche, A., et al.
Published: (2024)
Allowance for heat and vibration parameters variation of electric machines with extended failure interval
by: Somka, O. O., et al.
Published: (2014)
by: Somka, O. O., et al.
Published: (2014)
A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
by: Somka, O. O., et al.
Published: (2015)
by: Somka, O. O., et al.
Published: (2015)
IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
by: Pliugin, V. E., et al.
Published: (2019)
by: Pliugin, V. E., et al.
Published: (2019)
Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter
by: Bounab, A., et al.
Published: (2026)
by: Bounab, A., et al.
Published: (2026)
THE LAW OF ELECTROMAGNETIC FORCE
by: Kutkovetskyy, V. J.
Published: (2014)
by: Kutkovetskyy, V. J.
Published: (2014)
DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
by: Afanasov, A. M.
Published: (2012)
by: Afanasov, A. M.
Published: (2012)
Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
by: Khemis, A., et al.
Published: (2023)
by: Khemis, A., et al.
Published: (2023)
MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
by: Panchenko, V. I., et al.
Published: (2016)
by: Panchenko, V. I., et al.
Published: (2016)
ІНКРЕМЕНТНИЙ ЦИФРОВИЙ КВАЗІІДЕАЛ ІНТЕГРАТОР ЗАЯВКИ ПОПЕРЕДНЬОГО ПОТОКУ ОЦІНКИ КЕРУЮЧОЇ ІНДУКЦІЙНОЇ МАШИНИ
by: Ustun, O., et al.
Published: (2008)
by: Ustun, O., et al.
Published: (2008)
Application of a wavelet neural network approach to detect stator winding short circuits in asynchronous machines
by: Sakhara, S., et al.
Published: (2023)
by: Sakhara, S., et al.
Published: (2023)
Development of methods for adapting the parameters of spatial end winding sections in 2D circuit-field models of induction-synchronous electric machines
by: Kotsur, M. I.
Published: (2024)
by: Kotsur, M. I.
Published: (2024)
Forecasting electrical energy consumption for 24 hours ahead at country scale
by: Doroshenko, A.Yu., et al.
Published: (2024)
by: Doroshenko, A.Yu., et al.
Published: (2024)
DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
by: Galinovskiy, A. M., et al.
Published: (2015)
by: Galinovskiy, A. M., et al.
Published: (2015)
Application of machine learning in software engineering: an overview
by: Moroz, O.H., et al.
Published: (2019)
by: Moroz, O.H., et al.
Published: (2019)
Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
by: L’Hadj Said, M., et al.
Published: (2025)
by: L’Hadj Said, M., et al.
Published: (2025)
THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
by: Bezprozvannych, G. V., et al.
Published: (2017)
by: Bezprozvannych, G. V., et al.
Published: (2017)
INCREASE OF ENERGY EFFICIENCY OF TESTING OF TRACTION ELECTRIC MACHINES OF DIRECT AND PULSATING CURRENT
by: Afanasov, A. M.
Published: (2015)
by: Afanasov, A. M.
Published: (2015)
UNIFIED MODELS OF ELEMENTS OF POWER SUPPLY SYSTEMS BASED ON EQUATIONS IN PHASE COORDINATES
by: Vepryk, Yu. M., et al.
Published: (2015)
by: Vepryk, Yu. M., et al.
Published: (2015)
Yield prediction at field level
by: Kryvoshein, Oleksandr, et al.
Published: (2024)
by: Kryvoshein, Oleksandr, et al.
Published: (2024)
Class structure of electromechanical energy converter models with UML-diagrams application
by: Pliugin, V. E.
Published: (2014)
by: Pliugin, V. E.
Published: (2014)
AN OBJECT-ORIENTED FIELD MODEL OF ELECTROMECHANICAL TRANSFORMERS OF ENERGY
by: Pliugin, V. E.
Published: (2015)
by: Pliugin, V. E.
Published: (2015)
Impact of fractional filter in PI control loop applied to induction motor speed drive
by: Hassainia, S., et al.
Published: (2022)
by: Hassainia, S., et al.
Published: (2022)
Double layer back propagation neural network based on restricted Boltzmann machines for forecasting daily particulate matter 2.5
by: Fu, Minglei, et al.
Published: (2017)
by: Fu, Minglei, et al.
Published: (2017)
Similar Items
-
PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
by: Permynov, Y., et al.
Published: (2018) -
PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
by: Ben Slimene, Marwa
Published: (2020) -
Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
by: Loveykin, V.S., et al.
Published: (2019) -
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, A.S., et al.
Published: (2019) -
Vibration Features of Titanium Alloy Blades with Erosive Damages
by: Vorobiov, Yu.S., et al.
Published: (2018)