COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
Purpose. Single-phase machines with permanent magnets on the rotor are widely used in a variety of applications of a low rated power. When these machines are applied in high-speed applications, a retaining ring on the rotor core must be often used. However, it makes the assembly more complex and the...
Gespeichert in:
| Datum: | 2020 |
|---|---|
| Hauptverfasser: | Prakht, V. A., Dmitrievskii, V. A., Kazakbaev, V. M., Oshurbekov, S. Kh. |
| Format: | Artikel |
| Sprache: | Englisch Ukrainisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2020
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/2074-272X.2020.2.03 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O.I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O.I., et al.
Veröffentlicht: (2019)
Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
von: Miroshnikov, V.Yu.
Veröffentlicht: (2019)
von: Miroshnikov, V.Yu.
Veröffentlicht: (2019)
Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2018)
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2018)
Vibration Features of Titanium Alloy Blades with Erosive Damages
von: Vorobiov, Yu.S., et al.
Veröffentlicht: (2018)
von: Vorobiov, Yu.S., et al.
Veröffentlicht: (2018)
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, N.G., et al.
Veröffentlicht: (2018)
von: Shulzhenko, N.G., et al.
Veröffentlicht: (2018)
Stress Concentration in Vertical Tank Weld Seams
von: Uspenskiy, B.V., et al.
Veröffentlicht: (2018)
von: Uspenskiy, B.V., et al.
Veröffentlicht: (2018)
Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, A.V., et al.
Veröffentlicht: (2018)
von: Tretyak, A.V., et al.
Veröffentlicht: (2018)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, M.A., et al.
Veröffentlicht: (2019)
von: Degtyarev, M.A., et al.
Veröffentlicht: (2019)
Study of the Stressed State Near the Crack That Initiates at the Inclusion Under Longitudinal Shift Wave Influence
von: Misharin, A.S., et al.
Veröffentlicht: (2018)
von: Misharin, A.S., et al.
Veröffentlicht: (2018)
Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V.S., et al.
Veröffentlicht: (2019)
von: Loveykin, V.S., et al.
Veröffentlicht: (2019)
Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 1. Experimental Procedure
von: Degtyarev, M.A., et al.
Veröffentlicht: (2019)
von: Degtyarev, M.A., et al.
Veröffentlicht: (2019)
Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Kairov, A.S., et al.
Veröffentlicht: (2018)
von: Kairov, A.S., et al.
Veröffentlicht: (2018)
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
von: Koliadiuk, A.S., et al.
Veröffentlicht: (2019)
von: Koliadiuk, A.S., et al.
Veröffentlicht: (2019)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, I.V., et al.
Veröffentlicht: (2018)
von: Biblik, I.V., et al.
Veröffentlicht: (2018)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
von: Zaytsev, B.F., et al.
Veröffentlicht: (2018)
von: Zaytsev, B.F., et al.
Veröffentlicht: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, M.M.
Veröffentlicht: (2018)
von: Fridman, M.M.
Veröffentlicht: (2018)
Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2019)
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2019)
Stressed State in a Finite Cylinder with a Circular Crack at Non-stationary Torsion
von: Demydov, O.V., et al.
Veröffentlicht: (2018)
von: Demydov, O.V., et al.
Veröffentlicht: (2018)
Shear Modulus of a Fiber Composite with a Transtropic Viscolelastic Matrix and Transtropic Elastic Fiber
von: Grebenyuk, S.N., et al.
Veröffentlicht: (2018)
von: Grebenyuk, S.N., et al.
Veröffentlicht: (2018)
PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
von: Permynov, Y., et al.
Veröffentlicht: (2018)
von: Permynov, Y., et al.
Veröffentlicht: (2018)
PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
von: Ben Slimene, Marwa
Veröffentlicht: (2020)
von: Ben Slimene, Marwa
Veröffentlicht: (2020)
Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
von: Larbi, B., et al.
Veröffentlicht: (2023)
von: Larbi, B., et al.
Veröffentlicht: (2023)
Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
von: Kimouche, A., et al.
Veröffentlicht: (2024)
von: Kimouche, A., et al.
Veröffentlicht: (2024)
Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)
von: Somka, O. O., et al.
Veröffentlicht: (2014)
A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)
von: Somka, O. O., et al.
Veröffentlicht: (2015)
IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
von: Pliugin, V. E., et al.
Veröffentlicht: (2019)
von: Pliugin, V. E., et al.
Veröffentlicht: (2019)
Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter
von: Bounab, A., et al.
Veröffentlicht: (2026)
von: Bounab, A., et al.
Veröffentlicht: (2026)
THE LAW OF ELECTROMAGNETIC FORCE
von: Kutkovetskyy, V. J.
Veröffentlicht: (2014)
von: Kutkovetskyy, V. J.
Veröffentlicht: (2014)
ІНКРЕМЕНТНИЙ ЦИФРОВИЙ КВАЗІІДЕАЛ ІНТЕГРАТОР ЗАЯВКИ ПОПЕРЕДНЬОГО ПОТОКУ ОЦІНКИ КЕРУЮЧОЇ ІНДУКЦІЙНОЇ МАШИНИ
von: Ustun, O., et al.
Veröffentlicht: (2008)
von: Ustun, O., et al.
Veröffentlicht: (2008)
DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
von: Afanasov, A. M.
Veröffentlicht: (2012)
von: Afanasov, A. M.
Veröffentlicht: (2012)
MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
von: Panchenko, V. I., et al.
Veröffentlicht: (2016)
von: Panchenko, V. I., et al.
Veröffentlicht: (2016)
Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)
von: Khemis, A., et al.
Veröffentlicht: (2023)
Application of a wavelet neural network approach to detect stator winding short circuits in asynchronous machines
von: Sakhara, S., et al.
Veröffentlicht: (2023)
von: Sakhara, S., et al.
Veröffentlicht: (2023)
DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2015)
Application of machine learning in software engineering: an overview
von: Moroz, O.H., et al.
Veröffentlicht: (2019)
von: Moroz, O.H., et al.
Veröffentlicht: (2019)
Yield prediction at field level
von: Kryvoshein, Oleksandr, et al.
Veröffentlicht: (2024)
von: Kryvoshein, Oleksandr, et al.
Veröffentlicht: (2024)
Development of methods for adapting the parameters of spatial end winding sections in 2D circuit-field models of induction-synchronous electric machines
von: Kotsur, M. I.
Veröffentlicht: (2024)
von: Kotsur, M. I.
Veröffentlicht: (2024)
Forecasting electrical energy consumption for 24 hours ahead at country scale
von: Doroshenko, A.Yu., et al.
Veröffentlicht: (2024)
von: Doroshenko, A.Yu., et al.
Veröffentlicht: (2024)
Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)
THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2017)
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O.I., et al.
Veröffentlicht: (2019) -
Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
von: Miroshnikov, V.Yu.
Veröffentlicht: (2019) -
Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 1. Model Construction
von: Kovalchuk, S.B., et al.
Veröffentlicht: (2018) -
Vibration Features of Titanium Alloy Blades with Erosive Damages
von: Vorobiov, Yu.S., et al.
Veröffentlicht: (2018) -
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, N.G., et al.
Veröffentlicht: (2018)