EXPERIMENTAL INVESTIGATION OF THE CURRENT DISTRIBUTION ON THE SHEET BLANK SURFACE IN LINEAR TOOLS OF MAGNETIC-PULSED ATTRACTION

Purpose. The purpose of the present work consists in the characteristics experimental determination of the pulsed current transverse distribution on the surface of a sheet non-magnetic metal between the point contacts of the power source with different geometry of their connection under operating fr...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	Batygin, Yu. V., Chaplygin, E. A., Shinderuk, S. A.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2020
Schlagworte:	measurement of the current space-temporal distribution sheet metal linear tool magnetic-pulsed attraction Rogowski coil 621.318
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2020.2.07
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

NUMERICAL ESTIMATES OF CURRENTS AND FORCES IN LINEAR TOOLS OF THE MAGNETIC-PULSE ATTRACTION OF METALS. PART 1: LOW ELECTRICAL CONDUCTANCE METALS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2019)

THE MAIN INVENTIONS FOR TECHNOLOGIES OF THE MAGNETIC-PULSED ATTRACTION OF THE SHEET METALS. A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)

NUMERICAL ESTIMATES OF CURRENTS AND FORCES IN LINEAR TOOLS OF THE MAGNETIC-PULSE ATTRACTION OF METALS. PART 2: HIGH ELECTRICAL CONDUCTANCE METALS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2019)

EXPERIMENTAL APPROBATION OF SHEET METAL MAGNETIC PERMEABILITY MEASUREMENT SYSTEMS
von: Chaplygin, E. A., et al.
Veröffentlicht: (2014)

CALCULATION OF FIELDS AND CURRENTS IN THE INDUCTION SYSTEM WITH THE ATTRACTIVE SCREEN AND THE ADDITIONAL COIL AS A TOOL FOR THE STRAIGHTENING
von: Batygin, Yu. V., et al.
Veröffentlicht: (2015)

AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
von: Batygin, Yu. V., et al.
Veröffentlicht: (2015)

EXPERIMENTAL STUDY OF PROCESSES IN AN ATTRACTIVE-SCREEN INDUCTOR SYSTEM UNDER ADDITIONAL COIL INSERTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2014)

ANALYSIS OF THE PROCESSES IN AN INDUCTOR SYSTEM WITH AN ATTRACTING SCREEN EXCITED BY THE EXTERNAL CIRCULAR SOLENOID
von: Chaplygin, E. A.
Veröffentlicht: (2015)

NUMERICAL ESTIMATES OF ELECTRODYNAMICS PROCESSES IN THE INDUCTOR SYSTEM WITH AN ATTRACTIVE SCREEN AND A FLAT RECTANGULAR SOLENOID
von: Chaplygin, E. A., et al.
Veröffentlicht: (2018)

A NEW TREND IN MAGNETIC-PULSE METAL WORKING ASSOCIATED WITH THIN-WALLED SHEET METAL ATTRACTION. HISTORY AND DEVELOPMENT PROSPECTS
von: Gnatov, A. V.
Veröffentlicht: (2013)

THE EXCITED LOADS OF ATTRACTION IN A SYMMETRICAL INDUCTOR SYSTEM FOR THE MAGNETIC PULSE REMOVING OF THE BODY CAR
von: Gnatov, A. V.
Veröffentlicht: (2015)

A THIN CIRCULAR TURN WITH A CUT ABOVE A THIN-WALLED SHEET METAL
von: Gnatov, A. V.
Veröffentlicht: (2012)

COMPARATIVE ANALYSIS OF PARAMETERS OF A COMPOSITE COIL FOR MAGNETIC PULSE MATERIAL WORKING
von: Baida, E. I.
Veröffentlicht: (2013)

EXPERIMENTAL APPROBATION OF AN ELECTRODYNAMIC DIRECT ELECTRIC SYSTEM FOR EXTERNAL AUTOMOBILE BODY REPAIR
von: Bondarenko, A. Yu., et al.
Veröffentlicht: (2014)

Mutual influence of currents in plane inductor system with solenoid between two massive conductors
von: Batygin, Yu.V., et al.
Veröffentlicht: (2021)

WORKING FEATURES OF POWER SOURCE SYSTEMS – A MULTIPLE CURRENT PULSE GENERATOR
von: Argun, Schasyana V.
Veröffentlicht: (2013)

ANALYSIS OF ELECTROMAGNETIC PROCESS IN COMBINED INDUCTOR SYSTEMS, AS TOOLS FOR STRAIGHTENING OF MODERN CAR
von: Voloncevich, D. O., et al.
Veröffentlicht: (2015)

CALCULATION OF FIELDS IN A COMBINED INDUCTOR SYSTEM AS A TOOLS OF STRAIGHTENING OF METAL COATING OF CAR BODY
von: Voloncevich, D. O., et al.
Veröffentlicht: (2015)

CALCULATIONS OF ELECTROMAGNETIC FORCES ACTING ON A THIN FERROMAGNETIC PLATE DURING MAGNETIC-PULSE TREATMENT
von: Baida, E. I.
Veröffentlicht: (2014)

Development of an algorithm for evaluating the comprehensive ergonomic indicator of hand tools
von: Tsopa, Vitaliy A., et al.
Veröffentlicht: (2024)

ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)

FUZZY DYNAMIC RESPONSE OF A BISTABLE ELECTROMAGNETIC ACTUATOR BASED ON HIGH-COERCITIVITY PERMANENT MAGNETS
von: Baida, E. I.
Veröffentlicht: (2012)

IMPACT OF A HYDRAULIC DAMPER ON TWO-POSITION POLARIZED ACTUATOR DYNAMICS
von: Baida, E. I.
Veröffentlicht: (2013)

CONCEPT FOR DEVELOPING AN INTERACTIVE MAP OF GREEN HYDROGEN INVESTMENT ATTRACTIVENESS IN UKRAINE
von: Mkhitaryan , N., et al.
Veröffentlicht: (2025)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)

COMSOL MULTIPHYSICS BASED CALCULATION OF CONTACT PRESSURE IN MECHANICAL SYSTEMS
von: Baida, E. I.
Veröffentlicht: (2013)

RESEARCH OF THE APPLICATIONS POSSIBILITY OF INTERFACE RELAY IN HYBRID SWITCHING SYSTEMS OF BISTABLE ACTUATORS WINDINGS
von: Klymenko, B. V., et al.
Veröffentlicht: (2016)

INFLUENCE OF BISTABLE POLARIZED ACTUATOR CORE MAGNETIC PERMEABILITY AND RESISTIVITY ON BREAKAWAY TIME
von: Baida, E. I.
Veröffentlicht: (2013)

INVESTIGATION OF INFLUENCE OF SEPARATOR MAGNETIC SYSTEM CONFIGURATION WITH PERMANENT MAGNETS ON MAGNETIC FIELD DISTRIBUTION IN WORKING AREA
von: Gerlici, Juraj, et al.
Veröffentlicht: (2017)

Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
von: Gnatov, A. V.
Veröffentlicht: (2012)

Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)

Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)

PRINCIPLES OF FORMING AN INVESTMENT ATTRACTIVENESS LAYER IN THE GIS MAP OF GREEN HYDROGEN ENERGY PROJECTS
von: Kudrya , S., et al.
Veröffentlicht: (2025)

RESEARCH ON TRANSIENTS AND CHOICE OF OPTIMUM PARAMETERS OF SWITCHING ELEMENTS FOR AN ELECTROMAGNETIC VALVE CONTROL FOR COMBUSTION ENGINE EXHAUST SAMPLING
von: Lavrinenko, O. V.
Veröffentlicht: (2014)

DETERMINATION OF THE RATIONAL GEOMETRICAL PARAMETERS OF PLATE TYPE ELEMENTS OF MAGNETIC MATRIX OF THE POLYGRADIENT SEPARATOR
von: Gerlici, Juraj, et al.
Veröffentlicht: (2018)

Efficiency of multi-armature linear pulse electromechanical power and speed converters
von: Bolyukh, V. F., et al.
Veröffentlicht: (2024)

CALCULATION OF A LIFTING ELECTROMAGNET MAGNETIC FIELD VIA A CONFORMAL MAPPING METHOD
von: Shvedchikova, I. A.
Veröffentlicht: (2013)

MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

A review of existing methods and software tools for energy management and planning
von: Голець, В. О., et al.
Veröffentlicht: (2025)