Buchumschlag

CONTROL CURRENT METHOD OF THE CONCENTRATION OF FERROMAGNETIC ELEMENTS IN THE WORKING CHAMBER OF THE TECHNOLOGICAL INDUCTOR OF MAGNETIC FIELD DURING ITS OPERATION

Introduction. A rotating magnetic field three-phase inductor designed for the technological processing of various substances is considered. The processing is carried out by ferromagnetic elements in the form of pieces of iron wire moving with a magnetic field. Problem. The control problem of the con...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	Milykh, V. I., Shilkova, L. V.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2020
Schlagworte:	magnetic field inductor working chamber concentration of ferromagnetic elements current control numerical field analysis electromagnetic parameters angular characteristics 621.313 621.92 537.8
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2020.5.02
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

CHARACTERISTICS OF A CYLINDRICAL INDUCTOR OF A ROTATING MAGNETIC FIELD FOR TECHNOLOGICAL PURPOSES WHEN IT IS POWERED FROM THE MAINS AT A GIVEN VOLTAGE
von: Milykh, V. I., et al.
Veröffentlicht: (2020)

NUMERICAL-FIELD ANALYSIS OF THE CHARACTERISTICS OF A THREE-PHASE MAGNETIC FIELD INDUCTOR FOR THE TREATMENT OF VARIOUS SUBSTANCES WITH CURRENT STABILIZATION
von: Milykh, V. I., et al.
Veröffentlicht: (2019)

A comparative analysis of the parameters of a rotating magnetic field inductor when using concentric and loop windings
von: Milykh, V. I., et al.
Veröffentlicht: (2021)

INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2012)

CALCULATION OF MAGNETIC FIELD OF THREE-PHASE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS COVERED BY FERROMAGNETIC CORES
von: Rozov, V. Yu., et al.
Veröffentlicht: (2017)

COMPARATIVE ANALYSIS OF PARAMETERS OF A COMPOSITE COIL FOR MAGNETIC PULSE MATERIAL WORKING
von: Baida, E. I.
Veröffentlicht: (2013)

ANALYSIS OF ELECTROMAGNETIC PROCESS IN COMBINED INDUCTOR SYSTEMS, AS TOOLS FOR STRAIGHTENING OF MODERN CAR
von: Voloncevich, D. O., et al.
Veröffentlicht: (2015)

CALCULATION OF FIELDS IN A COMBINED INDUCTOR SYSTEM AS A TOOLS OF STRAIGHTENING OF METAL COATING OF CAR BODY
von: Voloncevich, D. O., et al.
Veröffentlicht: (2015)

CALCULATIONS OF ELECTROMAGNETIC FORCES ACTING ON A THIN FERROMAGNETIC PLATE DURING MAGNETIC-PULSE TREATMENT
von: Baida, E. I.
Veröffentlicht: (2014)

A NEW TREND IN MAGNETIC-PULSE METAL WORKING ASSOCIATED WITH THIN-WALLED SHEET METAL ATTRACTION. HISTORY AND DEVELOPMENT PROSPECTS
von: Gnatov, A. V.
Veröffentlicht: (2013)

THE SEVENTY YEARS’ HISTORY OF "YUZHCABLE" WORKS
von: Zolotaryov, V. M.
Veröffentlicht: (2013)

EXPERIMENTAL STUDY OF PROCESSES IN AN ATTRACTIVE-SCREEN INDUCTOR SYSTEM UNDER ADDITIONAL COIL INSERTION
von: Batygin, Yu. V., et al.
Veröffentlicht: (2014)

ANALYSIS OF THE VARIABLE COMPONENT OF MAGNETIC FIELD ON THE ROTATING ROTOR SURFACE OF A TURBOGENERATOR.
von: Milykh, V. I., et al.
Veröffentlicht: (2013)

INVESTIGATION OF FERMENTATION CHAMBER THERMAL CONDITION PARAMETERS
von: Tereshchuk, M., et al.
Veröffentlicht: (2022)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
von: Panchenko, V. I., et al.
Veröffentlicht: (2016)

THE NUMERICAL-FIELD ANALYSIS OF THE MAGNETIC FIELD AND THE ELECTRICAL QUANTITIES IN THE TURBOGENERATOR STATOR UNDER AUTONOMOUS UNBALANCED LOADING
von: Milykh, V. I.
Veröffentlicht: (2016)

Mutual influence of currents in plane inductor system with solenoid between two massive conductors
von: Batygin, Yu.V., et al.
Veröffentlicht: (2021)

PLANT «YUZHCABLE WORKS»: MILESTONES OF THE ROAD (75 YEARS TO PLANT «YUZHCABLE WORKS»)
von: Zolotaryov, V. M.
Veröffentlicht: (2018)

ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

MAGNETIC FIELD IN A GAP OF ELECTROMECHANICAL DISINTEGRATORS
von: Lushchik, V. D.
Veröffentlicht: (2014)

POWERFUL SOURCES OF PULSE HIGH-FREQUENCY ELECTROMECHANICAL TRANSDUCERS FOR MEASUREMENT, TESTING AND DIAGNOSTICS
von: Plesnetsov, S. Yu., et al.
Veröffentlicht: (2018)

AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
von: Gnatov, A. V.
Veröffentlicht: (2013)

NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
von: Milykh, V. I., et al.
Veröffentlicht: (2014)

THEORETICAL AND HARMONIC ANALYSIS OF MAGNETIC FIELDS IN THE ACTIVE ZONE OF A TURBOGENERATOR UNDER LOAD CONDITIONS
von: Milykh, V. I., et al.
Veröffentlicht: (2013)

Induction heating of rotating nonmagnetic billet in magnetic field produced by high-parameter permanent magnets
von: Doležel, Ivo, et al.
Veröffentlicht: (2014)

ANALYSIS OF THE OPERATION PECULIARITIES OF THE SUPERCONDUCTING INDUCTIVE CURRENT LIMITER WITH ADDITIONAL SUPERCONDUCTING SCREEN
von: Dan'ko, V. G., et al.
Veröffentlicht: (2017)

Biomagnetism of tumor in rats with Guerin’s carcinoma after injection of ferromagnetic nanocomposite (Ferroplat): contactless measurement
von: Todor, I.N., et al.
Veröffentlicht: (2023)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016)

Magma Chamber Associated to Deep Faults in Copahue Active Volcanic Complex, South America, Suggested by Magnetotelluric Study
von: Borzotta, E., et al.
Veröffentlicht: (2018)

GENERATOR ON ARCADYEV-MARX SCHEME WITH PEAKING OF THE PULSE FRONT IN ITS CASCADES FOR FOOD DISINFECTING
von: Boyko, N. I., et al.
Veröffentlicht: (2017)

AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
von: Batygin, Yu. V., et al.
Veröffentlicht: (2015)

AUTOMATED CALCULATIONS OF THE DYNAMICS OF TURBOGENERATOR ELECTROMAGNETIC PROCESSES IN SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015)

Protection of workers against the magnetic field of 330-750 kV overhead power lines when performing work without removing the voltage under load
von: Rozov, V. Yu., et al.
Veröffentlicht: (2024)

ANALYSIS OF THE PROCESSES IN AN INDUCTOR SYSTEM WITH AN ATTRACTING SCREEN EXCITED BY THE EXTERNAL CIRCULAR SOLENOID
von: Chaplygin, E. A.
Veröffentlicht: (2015)

NUMERICAL ESTIMATES OF ELECTRODYNAMICS PROCESSES IN THE INDUCTOR SYSTEM WITH AN ATTRACTIVE SCREEN AND A FLAT RECTANGULAR SOLENOID
von: Chaplygin, E. A., et al.
Veröffentlicht: (2018)

MAGNETIC-PULSE CAR BODY PANELS FLATTENING. THEORETICAL ASPECTS AND PRACTICAL RESULTS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2016)

ENERGY EFFICIENCY OF THE DISINFECTION TREATMENT OF LIQUID FOODSTUFFS BY HIGH-VOLTAGE PULSE EFFECTS
von: Boyko, N. I., et al.
Veröffentlicht: (2018)

THE MAIN INVENTIONS FOR TECHNOLOGIES OF THE MAGNETIC-PULSED ATTRACTION OF THE SHEET METALS. A BRIEF REVIEW
von: Batygin, Yu. V., et al.
Veröffentlicht: (2018)