Buchumschlag

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES

Aim. Improving of control accuracy by rolling strip thickness and tension and reducing of sensitivity to changes of plant parameters based on structural-parametric synthesis of robust control by rolling mills multi-motor electric drives with parametric uncertainty. Methodology. The method of structu...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
Hauptverfasser:	Kuznetsov, B. I., Nikitina, T. B., Bovdui, I. V.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2020
Schlagworte:	rolling mill multi-motor electric drive rolling strip thickness and tension control computer simulation 621.3.013
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2020.5.04
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2016)

Roller Forming Unit Dynamic Analysis with Energy Balanced Drive Dissipative Properties Taken into Account
von: Loveikin, V. S., et al.
Veröffentlicht: (2018)

Roller Forming Unit Dynamic Analysis with Energy Balanced Drive Dissipative Properties Taken into Account
von: Loveikin, V. S., et al.
Veröffentlicht: (2018)

RADAR DETERMINATION OF SHIP ROLL PERIOD IN ROUGH SEAS
von: Gorobets, V. N., et al.
Veröffentlicht: (2025)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

SIMPLIFIED MATHEMATICAL MODEL OF GROUP OF OVERHEAD POWER LINES MAGNETIC FIELD
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
von: Bondar, R. P.
Veröffentlicht: (2014)

DETERMINATION OF RAILWAY ROLLING STOCK OPTIMAL MOVEMENT MODES
von: Petrenko, A. N., et al.
Veröffentlicht: (2017)

THE EFFECTIVENESS OF ACTIVE SHIELDING OF MAGNETIC FIELD WITH CIRCULAR SPACE-TIME CHARACTERISTIC AND WITH DIFFERENT SHIELDING COILS SPATIAL POSITIONS
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

Traction electric drive based on fuel cell batteries and on-board inertial energy storage for multi unit train
von: Omelyanenko, V. I., et al.
Veröffentlicht: (2021)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

Analysis of suitable converter for the implementation of drive system in solar photovoltaic panels
von: Themozhi, G., et al.
Veröffentlicht: (2024)

EXTERNAL MAGNETIC FIELD OF URBAN TRANSFORMER SUBSTATIONS AND METHODS OF ITS NORMALIZATION
von: Rozov, V. Yu., et al.
Veröffentlicht: (2017)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Analysis of the thermal state of the electromagnetic mill inductor with oil cooling in stationary operation modes
von: Milykh, V. I., et al.
Veröffentlicht: (2023)

LOW-FREQUENCY MAGNETIC FIELD SHIELDING BY A CIRCULAR PASSIVE LOOP AND CLOSED SHELLS
von: Grinchenko, V. S., et al.
Veröffentlicht: (2016)

MAGNETIC FIELD NORMALIZATION IN RESIDENTIAL BUILDING LOCATED NEAR OVERHEAD LINE BY GRID SHIELD
von: Grinchenko, V. S., et al.
Veröffentlicht: (2020)

EFFICIENT SHIELDING OF THREE-PHASE CABLE LINE MAGNETIC FIELD BY PASSIVE LOOP UNDER LIMITED THERMAL EFFECT ON POWER CABLES
von: Rozov, V. Yu., et al.
Veröffentlicht: (2019)

SCREENING MAGNETIC FIELDS OF THE POWER FREQUENCY BY THE WALLS OF HOUSES
von: Pelevin, D. Ye.
Veröffentlicht: (2015)

SHIELDING OF A UNIFORM ALTERNATING MAGNETIC FIELD USING A CIRCULAR PASSIVE LOOP
von: Grinchenko, V. S., et al.
Veröffentlicht: (2015)

SIMULATION OF AN AC DRIVE SYSTEM COMPRISING A CASCADE MULTILEVEL VOLTAGE INVERTER
von: Zhemerov, George G., et al.
Veröffentlicht: (2013)

CALCULATION METHOD OF ELECTRIC POWER LINES MAGNETIC FIELD STRENGTH BASED ON CYLINDRICAL SPATIAL HARMONICS
von: Erisov, A. V., et al.
Veröffentlicht: (2016)

CALCULATION OF MAGNETIC FIELD OF THREE-PHASE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS COVERED BY FERROMAGNETIC CORES
von: Rozov, V. Yu., et al.
Veröffentlicht: (2017)

PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
von: Chumak , V., et al.
Veröffentlicht: (2025)

ANALYSIS OF THE STATE OF THE EXTERNAL LIGHTNING PROTECTION SYSTEM FOR OPERATING ENERGY OBJECTS
von: Koliushko, D. G., et al.
Veröffentlicht: (2020)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

The method of multi-objective parametric design of magnetic field active canceling robust system for residential multy-story buildings closed to double-circuit overhead power lines
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2023)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
von: Lobov, V. I., et al.
Veröffentlicht: (2017)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V. S., et al.
Veröffentlicht: (2019)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V. S., et al.
Veröffentlicht: (2019)

BRUSHLESS VALVE ELECTRIC DRIVE WITH MINIMUM EQUIPMENT EXCESS FOR AUTONOMOUS FLOATING VEHICLE
von: Volyanskaya, Ya. B., et al.
Veröffentlicht: (2017)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)

Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)

The forecast of total technological energy intensity of ferrous metallurgy products of Ukraine according to the production schemes till 2040
von: Kuts G.O., et al.
Veröffentlicht: (2021)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
von: Petrushin, V. S., et al.
Veröffentlicht: (2019)

Neutral corner while rolling in the non-driving rolls
von: A. I. Leshchenko, et al.
Veröffentlicht: (2012)