Buchumschlag

BREAKDOWN VOLTAGE OF MICRON RANGE AIR INCLUSIONS IN CAPACITOR PAPER

Purpose. To substantiate the breakdown mechanism of capacitor paper on the basis of numerical-field models with segmented cross-sections of cylindrical volumes of air and water, and also use the proposed models to determine the breakdown strength of air in micron-sized gaps under normal conditions....

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2020
1. Verfasser:	Palchykov, O. O.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2020
Schlagworte:	electrical breakdown model of capacitor paper micron gap electrostatic field finite element method 621.3.048.8
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2020.6.05
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

The main characteristics of the leader channel during breakdown of a long air gap by high pulse voltage
von: Baranov, M. I.
Veröffentlicht: (2025)

DYNAMICS MODEL OF MOISTURE IN PAPER INSULATION-TRANSFORMER OIL SYSTEM IN NON-STATIONARY THERMAL MODES OF THE POWER TRANSFORMER
von: Vasilevskij, V. V.
Veröffentlicht: (2016)

Determination of the maximum mechanical stresses in the insulating material around a defect with a high dielectric permittivity in an electrostatic field
von: Palchykov, O. О.
Veröffentlicht: (2024)

DETERMINATION OF THE EFFECTIVE PERMITTIVITY OF A HETEROGENEOUS MATERIAL
von: Palchykov, O. O.
Veröffentlicht: (2020)

Analysis of technologies of disposal and use fibrous paper skopje
von: Petrushka, Ihor M., et al.
Veröffentlicht: (2024)

CREATION OF HIGH-VOLTAGE PULSE CAPACITORS ON THE BASIS OF A COMPOSITE FILM DIELECTRIC
von: Gun'ko, V. I., et al.
Veröffentlicht: (2014)

Internal capacitive compensation of the reactive power of the screw electromechanical converter
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)

ANALYSIS AND DEVELOPMENT OF THE BUBBLE MODEL OF THE FORMATION STAGE OF HIGH-VOLTAGE BREAKDOWN OF THE WATER GAP
von: Zhekul, V. G., et al.
Veröffentlicht: (2018)

Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
von: Malyar, V. S., et al.
Veröffentlicht: (2012)

FEATURES OF SELECTION OF CAPACITOR BANKS IN ELECTRIC NETWORKS WITH INTERHARMONIC SOURCES
von: Sayenko, Yu. L., et al.
Veröffentlicht: (2017)

Improving the mathematical models applied for the sollution of solid assembly constructions thermoelasticity problem
von: Morhun, S. A.
Veröffentlicht: (2017)

Improving the mathematical models applied for the sollution of solid assembly constructions thermoelasticity problem
von: Morhun, S. A.
Veröffentlicht: (2017)

A NEW METHODOLOGY CALLED DICE GAME OPTIMIZER FOR CAPACITOR PLACEMENT IN DISTRIBUTION SYSTEMS
von: Dehghani, M., et al.
Veröffentlicht: (2020)

Model building for current transformer paper-oil insulation state diagnostics
von: Skrupskaya, L. S., et al.
Veröffentlicht: (2014)

DYNAMIC REGIMES OF ASYNCHRONOUS MOTORS WITH CONCATENATED CAPACITORS
von: Malyar, V. S., et al.
Veröffentlicht: (2015)

AN IMPROVED CONTROL ALGORITHM FOR «DYNAMIC CAPACITOR» VAR COMPENSATOR
von: Podnebennaya, S. K.
Veröffentlicht: (2015)

GUARANTEEING THE TROUBLE-FREE OPERATION OF CAPACITOR BANKS IN POWER-SUPPLY SYSTEMS OF INDUSTRIAL ENTERPRISES
von: Gapon, D. A., et al.
Veröffentlicht: (2016)

RESONANT PROCESSES IN STARTING MODES OF SYNCHRONOUS MOTORS WITH CAPACITORS IN THE EXCITATION WINDINGS CIRCUIT
von: Malyar, V. S., et al.
Veröffentlicht: (2017)

SPRING SEARCH ALGORITHM FOR SIMULTANEOUS PLACEMENT OF DISTRIBUTED GENERATION AND CAPACITORS
von: Dehghani, M., et al.
Veröffentlicht: (2018)

SIMULTANEOUS ALLOCATION OF MULTIPLE DISTRIBUTED GENERATION AND CAPACITORS IN RADIAL NETWORK USING GENETIC-SALP SWARM ALGORITHM
von: Djabali, Chabane, et al.
Veröffentlicht: (2020)

Comparative performance analysis of backstepping and sliding mode control for static synchronous compensators based on flying capacitor multicell converters
von: Belakehal, S., et al.
Veröffentlicht: (2026)

METHOD FOR VOLTAGE CONTROL IN CHARGE CIRCUIT OF ELECTRIC DISCHARGE INSTALLATIONS WITH TWO CAPACITORS UNDER NONZERO INITIAL CONDITIONS
von: Suprunovska, N. I., et al.
Veröffentlicht: (2018)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

ESTIMATION CRITERIA FOR DEGREE OF PAPER-IMPREGNATED INSULATED POWER CABLE AGEING
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2013)

Physical modeling of electrical physical processes at long air gaps breakdown
von: M. M. Rezinkina, et al.
Veröffentlicht: (2017)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)

ASSESSMENT OF THE RESOURCE CONSUMPTION OF OIL-FILLED POWER TRANSFORMER PAPER INSULATION BASED ON UPDATED AGING INTEGRAL
von: Vasilevskij, V. V.
Veröffentlicht: (2015)

COMPUTING EXPERIMENTS FOR CALCULATION OF ELECTROSTATIC AXISYMMETRIC FIELD IN PIECEWISE-HOMOGENEOUS INSULATION WITH SPHERICAL INCLUSIONS
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2014)

THE ABSORPTION CHARACTERISTICS OF THE PHASE AND ZONE PAPER-IMPREGNATED INSULATION OF POWER CABLE AT DIRECT VOLTAGE
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2015)

The effect of SiO2 microparticle concentration on the electrical and thermal properties of silicone rubber for electrical insulation applications
von: Ahmed, Z., et al.
Veröffentlicht: (2025)

Finite groups with a system of generalized central elements
von: Shemetkova, Olga
Veröffentlicht: (2018)

Исследование термометрических характеристик GaP-диодов p+–n-типа
von: Krasnov, V. A., et al.
Veröffentlicht: (2008)

Dielectric parameters of phase and belt paper impregnated insulation of power cables
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2025)

HALF-DIFFERENTIAL CAPACITIVE AIR GAP SENSOR FOR HYDROGENERATORS
von: Levytskyi , A., et al.
Veröffentlicht: (2024)

Estimation of electrical resistivity of conductive materials of random shapes
von: Gans, Š., et al.
Veröffentlicht: (2023)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)

Mitigation of cogging torque in surface permanent magnet brushless DC motor using slot opening shift
von: Patel, A. N., et al.
Veröffentlicht: (2026)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)