Buchumschlag

Features of excitation of a linear electromechanical converter of induction type from an AC source

Purpose. The purpose of the article is to establish the basic laws of operation of induction-type linear electromechanical converter (LEMС) during operation in high-speed and shock-power modes and excitation from an AC source of increased frequency. Methodology. With the help of a mathematical model...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	Bolyukh, V.F., Kashansky, Yu.V., Schukin, I.S.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2021
Schlagworte:	linear electromechanical induction-type converter mathematical model high-speed and shock-power operation mode alternating current source maximum speed electrodynamic force impulse
Online Zugang:	http://eie.khpi.edu.ua/article/view/225060
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

A TECHNIQUE OF EXPERIMENTAL INVESTIGATIONS OF LINEAR IMPULSE ELECTROMECHANICAL CONVERTERS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

Influence of the initial winding displacement on the indicators of the electromechanical induction accelerator of cylindrical configuration
von: Bolyukh, V. F., et al.
Veröffentlicht: (2021)

EXCITATION WITH A SERIES OF PULSES OF A LINEAR PULSE ELECTRODYNAMIC TYPE CONVERTER OPERATING IN POWER AND HIGH-SPEED MODES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2020)

EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

Influence of limiting the duration of the armature winding current on the operating indicators of a linear pulse electromechanical induction type converter
von: Bolyukh, V.F., et al.
Veröffentlicht: (2021)

INVESTIGATION OF LINEAR PULSE ELECTROMECHANICAL CONVERTER OF INDUCTION TYPE WITH DOUBLE ARMATURE INTENDED FOR DESTROYING INFORMATION ON SSD STORAGE DEVICE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

INVESTIGATION OF THERMAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER OF CYCLIC ACTION
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

IMMEDIATIVE MODEL OF THE CHARGING PROCESS OF THE EMCSENTIAL AC-CUMULATOR OF THE ELECTRODYNAMIC DRIVER PUMP IN ALONE STATE WINDTURBINE
von: Holovko, V., et al.
Veröffentlicht: (2019)

AN OPTIMIZATION APPROACH TO THE CHOICE OF PARAMETERS OF LINEAR PULSE INDUCTION ELECTROMECHANICAL CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

EXPERIMENTAL STUDY OF FERROMAGNETIC CORE PARAMETERS INFLUENCE ON ELECTROMECHANICAL CHARACTERISTICS OF A LINEAR INDUCTION-DYNAMIC CONVERTER
von: Bolyukh, V. F., et al.
Veröffentlicht: (2014)

INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

A COMPARATIVE ANALYSIS OF CONSTRUCTIVE SCHEMES OF LINEAR IMPACTOR ELECTROMECHANICAL CONVERTERS COMBINED TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

INFLUENCE OF ARMATURE PARAMETERS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER ON ITS EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2017)

SYNTHESIS OF A TWO-MASS ELECTRIC DRIVE WITH AN ASTATIC SYSTEM OF SUBORDINATE REGULATION AT THE ACTION OF VARIABLE FRICTION FORCES
von: Zadorozhniaia, I. N., et al.
Veröffentlicht: (2018)

Efficiency of multi-armature linear pulse electromechanical power and speed converters
von: Bolyukh, V. F., et al.
Veröffentlicht: (2024)

Electromechanical processes during the start of induction-type magnetic levitation
von: Bolyukh, V. F.
Veröffentlicht: (2025)

Electromechanical guidance system based on a fuzzy proportional-plus-differential position controller
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)

Electromechanical and thermophysical processes in the pulse induction accelerator of plasma formation
von: Korytchenko, K. V., et al.
Veröffentlicht: (2023)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

A calculation of basic thermophysical, gasodynamic and electropower parameters of electric explosion is in the gas environment of metallic explorer
von: Baranov, M. I., et al.
Veröffentlicht: (2023)

A MATHEMATICAL MODEL OF AN ELECTROMECHANICAL TRANSDUCER FOR ELECTRIC VEHICLE SHOCK ABSORBER
von: Sergienko, A. N., et al.
Veröffentlicht: (2012)

CHELYABINSK METEOROID ACOUSTIC EFFECTS
von: Chernogor, L. F.
Veröffentlicht: (2017)

Comparative analysis between classical and third-order sliding mode controllers for maximum power extraction in wind turbine system
von: Bourouina, A., et al.
Veröffentlicht: (2025)

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)

СONDITIONS INVESTIGATIONS OF INDUCTION OF THE "STEADY" PLASMA RING IN THE ELECTRODYNAMIC ACCELERATOR
von: Sakun, O. V., et al.
Veröffentlicht: (2015)

GEOMETRIC AND ELECTROPHYSICAL PARAMETERS OF ARMATURE WINDING OF ELECTROMECHANICAL CONVERTER OF INERTIAL ENERGY STORAGE FOR SUBURBAN TRAINS
von: Omelianenko, H. V., et al.
Veröffentlicht: (2020)

Internal capacitive compensation of the reactive power of the screw electromechanical converter
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)

RESEARCHING OPERATING MODES OF ELECTROMECHANICAL ELEVATOR SYSTEM USING VECTOR CONTROLLED ASYNCHRONOUS MOTOR
von: Pechenik, M., et al.
Veröffentlicht: (2022)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

HIGH-PERFORMANCE ELECTROMECHANICAL AND ELECTROMAGNETIC PULSE DEVICES FOR DESTRUCTION OF INFORMATION ON DIGITAL DRIVES
von: Bolyukh, V. F., et al.
Veröffentlicht: (2015)

Plasma acceleration in the atmosphere by pulsed inductive thruster
von: Korytchenko, K. V., et al.
Veröffentlicht: (2024)

Bipolar DC output fed grounded DC-AC converter for photovoltaic application
von: Sindhuja, R., et al.
Veröffentlicht: (2023)

Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)

Harmonics suppression in high-speed railway via single-phase traction converter with an LCL filter using fuzzy logic control strategy
von: Aissaoui, M., et al.
Veröffentlicht: (2024)

PROBABILISTIC FORECASTING METHODS FOR WIND PLANTS CURRENT POWER
von: Uzheyko, S.
Veröffentlicht: (2018)

MODELING THE OPERATION OF A HYDRO–ACCUMULATING POWER PLANT IN THE PUMP MODE AT POWER SUPPLY FROM THE WIND POWER PLANT
von: Verbovij, А.
Veröffentlicht: (2019)

MODELING OF DYNAMIC AND QUASISTATIC MODES OF THE WORK OF A WIND PUMP INSTALLATION WITH CONSIDERATION OF STOCHASTIC COMPOUND WIND SPEED
von: Verbovij, А., et al.
Veröffentlicht: (2018)