Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
Purpose. Development of methods and algorithms for calculation of starting modes of the induction motors with the squirrel-cage rotor. Methodology. Mathematical modelling of starting modes of asynchronous electric drives in various coordinate systems with the use of numerical methods for solving bou...
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | Malyar, V. S., Hamola, O. Ye., Maday, V. S., Vasylchyshyn, I. I. |
| Format: | Artikel |
| Sprache: | Englisch Ukrainisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2021
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/228869 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
MODELLING OF DYNAMIC MODES OF AN INDUCTION ELECTRIC DRIVE AT PERIODIC LOAD
von: Malyar, V. S., et al.
Veröffentlicht: (2020)
von: Malyar, V. S., et al.
Veröffentlicht: (2020)
Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)
von: Milykh, V. I.
Veröffentlicht: (2023)
DYNAMIC REGIMES OF ASYNCHRONOUS MOTORS WITH CONCATENATED CAPACITORS
von: Malyar, V. S., et al.
Veröffentlicht: (2015)
von: Malyar, V. S., et al.
Veröffentlicht: (2015)
REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
von: Malyar, V. S., et al.
Veröffentlicht: (2013)
von: Malyar, V. S., et al.
Veröffentlicht: (2013)
RESONANT PROCESSES IN STARTING MODES OF SYNCHRONOUS MOTORS WITH CAPACITORS IN THE EXCITATION WINDINGS CIRCUIT
von: Malyar, V. S., et al.
Veröffentlicht: (2017)
von: Malyar, V. S., et al.
Veröffentlicht: (2017)
STUDYING THE EFFECT OF AN ADDITIONAL ACTIVE RESISTANCE IN THE FIELD WINDING CIRCUIT ON STARTING CHARACTERISTICS OF SALIENT-POLE SYNCHRONOUS MOTORS
von: Malyar, V. S., et al.
Veröffentlicht: (2018)
von: Malyar, V. S., et al.
Veröffentlicht: (2018)
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)
Dynamic measurement of magnetic characteristics of switched reluctance motor
von: Fan, J., et al.
Veröffentlicht: (2023)
von: Fan, J., et al.
Veröffentlicht: (2023)
Simulation of asynchronous modes of synchronous motors with capacitors in the excitation circuit
von: Malyar, V. S., et al.
Veröffentlicht: (2012)
von: Malyar, V. S., et al.
Veröffentlicht: (2012)
METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)
von: Lobov, V. I., et al.
Veröffentlicht: (2015)
Study of changed main flux reactance of squirrel-cage induction motors using field analysis of their starting characteristics
von: O. M. Popovych, et al.
Veröffentlicht: (2018)
von: O. M. Popovych, et al.
Veröffentlicht: (2018)
Adding effect of current displacement and magnetic circuit saturation in an asynchronous motor mathematical model
von: Tsodik, I. A., et al.
Veröffentlicht: (2014)
von: Tsodik, I. A., et al.
Veröffentlicht: (2014)
Electromechanical processes during the start of induction-type magnetic levitation
von: Bolyukh, V. F.
Veröffentlicht: (2025)
von: Bolyukh, V. F.
Veröffentlicht: (2025)
ANALYSIS OF STATIC CHARACTERISTICS OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR ROTOR WITH ANTI-FLUGE CONTROL
von: Golovko, V., et al.
Veröffentlicht: (2022)
von: Golovko, V., et al.
Veröffentlicht: (2022)
MECHANICAL CHARACTERISTICS OF THREE-PHASE INDUCTION MOTORS WITH SINGLE-PHASE POWER SUPPLY
von: Malyar, V. S., et al.
Veröffentlicht: (2016)
von: Malyar, V. S., et al.
Veröffentlicht: (2016)
The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
von: Vasko, P., et al.
Veröffentlicht: (2016)
von: Vasko, P., et al.
Veröffentlicht: (2016)
ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)
INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
von: Lobov, V. I., et al.
Veröffentlicht: (2016)
von: Lobov, V. I., et al.
Veröffentlicht: (2016)
A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
ANALYSIS OF STATIC CHARACTERISTICS OF THE CENTRIFUGAL REGULATOR OF THE WIND ROTOR WITH FLUGE CONTROL
von: Golovko, V., et al.
Veröffentlicht: (2021)
von: Golovko, V., et al.
Veröffentlicht: (2021)
СURRENT FILTERING IN A THREE-PHASE THREE-WIRE POWER SYSTEM AT ASYMMETRIC SINUSOIDAL VOLTAGES
von: Artemenko, M. Yu., et al.
Veröffentlicht: (2018)
von: Artemenko, M. Yu., et al.
Veröffentlicht: (2018)
Advanced research of the impact of rotor bars anisotropic conductivity on starting torque of an induction motor with a die-cast copper cage
von: Chuvashev, V.A., et al.
Veröffentlicht: (2006)
von: Chuvashev, V.A., et al.
Veröffentlicht: (2006)
Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)
von: Tran, C. D., et al.
Veröffentlicht: (2024)
Modelling and performance testing of a digital over-current relay enhanced designed model
von: Sekhane, H., et al.
Veröffentlicht: (2022)
von: Sekhane, H., et al.
Veröffentlicht: (2022)
FEATURES OF SELECTION OF CAPACITOR BANKS IN ELECTRIC NETWORKS WITH INTERHARMONIC SOURCES
von: Sayenko, Yu. L., et al.
Veröffentlicht: (2017)
von: Sayenko, Yu. L., et al.
Veröffentlicht: (2017)
THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)
COMPARISON OF ENERGY CONSUMPTION OF VARIOUS ELECTRICAL MOTORS OPERATING IN A PUMPING UNIT
von: Goman, V. V., et al.
Veröffentlicht: (2020)
von: Goman, V. V., et al.
Veröffentlicht: (2020)
Starting conditions for the development of geothermal energy in Ukraine
von: Shurchkova Yu.A.
Veröffentlicht: (2019)
von: Shurchkova Yu.A.
Veröffentlicht: (2019)
Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)
von: Tran, C. D., et al.
Veröffentlicht: (2025)
REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)
von: Kovalova, J. V.
Veröffentlicht: (2014)
INFLUENCE OF FERROMAGNETIC CORE PARAMETERS ON INDUCTION-TYPE DYNAMIC MOTOR EFFICIENCY
von: Bolyukh, V. F., et al.
Veröffentlicht: (2012)
von: Bolyukh, V. F., et al.
Veröffentlicht: (2012)
Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)
von: Saifi, R.
Veröffentlicht: (2023)
Model of pulsating current traction motor taking into consideration magnetic losses in steel
von: Goolak, S., et al.
Veröffentlicht: (2021)
von: Goolak, S., et al.
Veröffentlicht: (2021)
CALCULATION OF COMPENSATING SUSCEPTANCE FOR A THREE-WIRE NET
von: Sirotin, Iu. A.
Veröffentlicht: (2014)
von: Sirotin, Iu. A.
Veröffentlicht: (2014)
Single-phase power shunt active filter design using photovoltaic as reactive power compensator
von: Dwinanto, B., et al.
Veröffentlicht: (2025)
von: Dwinanto, B., et al.
Veröffentlicht: (2025)
DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
RESEARCH OF THE MODES OF FULL COMPENSATION OF REACTIVE POWER IN A THREE-PHASE POWER SUPPLY SYSTEM
von: Yagup, V. G., et al.
Veröffentlicht: (2019)
von: Yagup, V. G., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022) -
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019) -
MODELLING OF DYNAMIC MODES OF AN INDUCTION ELECTRIC DRIVE AT PERIODIC LOAD
von: Malyar, V. S., et al.
Veröffentlicht: (2020) -
Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023) -
DYNAMIC REGIMES OF ASYNCHRONOUS MOTORS WITH CONCATENATED CAPACITORS
von: Malyar, V. S., et al.
Veröffentlicht: (2015)