Research of operating modes of conductors in power supply systems of cranes with induction feed, taking into account the influence of higher harmonics of the current
Purpose. Investigation of the influence of higher harmonics of current on current distribution, voltage and power losses in the supply systems of crane trolleys and development of a calculation method for practical use. Methodology. The analytical method and the results of the modeling method were u...
Saved in:
| Date: | 2021 |
|---|---|
| Main Authors: | Andrienko, P. D., Nemykina, O. V., Andrienko, A. A., Mokhnach, R. E. |
| Format: | Article |
| Language: | English Ukrainian |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2021
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/242487 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
HIGH CURRENT HARMONICS INFLUENCE ON THE CHOICE OF CONDUCTORS OF CRANE POWER SUPPLY SYSTEMS
by: Andrienko, P. D., et al.
Published: (2019)
by: Andrienko, P. D., et al.
Published: (2019)
The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
by: Vasko, P., et al.
Published: (2016)
by: Vasko, P., et al.
Published: (2016)
The ecological safety rise of feed system of transport energy equipment
by: Sudnik V.K., et al.
Published: (2001)
by: Sudnik V.K., et al.
Published: (2001)
AN EFFECTIVE CONTROL OF AN ISOLATED INDUCTION GENERATOR SUPPLYING DC LOAD FOR WIND POWER CONVERTING APPLICATIONS
by: Louze, L., et al.
Published: (2020)
by: Louze, L., et al.
Published: (2020)
Enhancement of the efficiency of work of a TPP-210A boiler under variable loads at different technologies of dust supply to the burners based on the results of studies of the process of liquid slag removal
by: Kesova L.O., et al.
Published: (2017)
by: Kesova L.O., et al.
Published: (2017)
On the solution of the problem of synthesis of the control system for the process of dosed feed of electrode wire for arc welding equipment
by: Lebedev, V.A.
Published: (2021)
by: Lebedev, V.A.
Published: (2021)
INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
by: Bolyukh, V. F., et al.
Published: (2018)
by: Bolyukh, V. F., et al.
Published: (2018)
MODELING OF DYNAMIC AND QUASISTATIC MODES OF THE WORK OF A WIND PUMP INSTALLATION WITH CONSIDERATION OF STOCHASTIC COMPOUND WIND SPEED
by: Verbovij, А., et al.
Published: (2018)
by: Verbovij, А., et al.
Published: (2018)
MODELING OF THE CHARGE PROCESS OF THE UPPER RESERVOIR OF THE PUMP HYDROELECTRIC ENERGY STORAGE FROM THE WIND PUMP INSTALLATION
by: Pazych, S.
Published: (2019)
by: Pazych, S.
Published: (2019)
CONTROL OF VALVE ELECTRIC DRIVE COORDINATES OF AUTOMATED WELDING EQUIPMENT FEED MECHANISMS
by: Lebedev, V. A., et al.
Published: (2020)
by: Lebedev, V. A., et al.
Published: (2020)
Model of pulsating current traction motor taking into consideration magnetic losses in steel
by: Goolak, S., et al.
Published: (2021)
by: Goolak, S., et al.
Published: (2021)
The mutual influence of exciting and induced currents in the circular solenoid – massive conductor system
by: Batygin, Yu. V., et al.
Published: (2023)
by: Batygin, Yu. V., et al.
Published: (2023)
Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
by: Petrenko, A. N., et al.
Published: (2012)
by: Petrenko, A. N., et al.
Published: (2012)
AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE
by: Shalamov, S. P.
Published: (2016)
by: Shalamov, S. P.
Published: (2016)
Review of the features and abilities of content-monitoring of national segment inside the Internet
by: Lande, D. V., et al.
Published: (2016)
by: Lande, D. V., et al.
Published: (2016)
WIND POWER SECTOR OF UKRAINE: THE FURTHER DEVELOPMENT ON MARKET CONDITIONS
by: Konechenkov, A., et al.
Published: (2021)
by: Konechenkov, A., et al.
Published: (2021)
MODELING OF PV MODULE CURRENT-VOLTAGE CHARACTERISTIC WITH VARIATIVE IDEALITY FACTOR AND REVERSE SATURATION CURRENT
by: Ivanchuk , V., et al.
Published: (2024)
by: Ivanchuk , V., et al.
Published: (2024)
CREATING THE RT-32 RADIO TELESCOPE ON THE BASIC OF MARK-4B ANTENNA SYSTEM. 1. MODERNIZATION PROJECT AND FIRST RESULTS
by: Ulyanov, O. M., et al.
Published: (2019)
by: Ulyanov, O. M., et al.
Published: (2019)
ЗНИЖЕННЯ ВИТРАТ НА ПОКРИТТЯ НЕБАЛАНСІВ УЧАСНИКІВ БАЛАНСУЮЧОЇ ГРУПИ ВИРОБНИКІВ ЕЛЕКТРИЧНОЇ ЕНЕРГІЇ З ВІДНОВЛЮВАНИХ ДЖЕРЕЛ
by: Блінов, І.В., et al.
Published: (2023)
by: Блінов, І.В., et al.
Published: (2023)
Optimal placement and sizing of distributed generation units in distribution networks using an enhanced particle swarm optimization framework
by: Al Soudi, M., et al.
Published: (2026)
by: Al Soudi, M., et al.
Published: (2026)
Generalization of the formula of maximum losses time and estimation of the power consumption parameters dependence on formula's accuracy
by: Kaplin M.I., et al.
Published: (2001)
by: Kaplin M.I., et al.
Published: (2001)
Exploration and mitigation of power quality problems in radial distribution system by placing distributed generation through voltage stability index
by: Manohara, M., et al.
Published: (2023)
by: Manohara, M., et al.
Published: (2023)
Approximation of a distributive network loading graph in accordance with the normal law of distributing
by: Levchuk A.P.
Published: (2002)
by: Levchuk A.P.
Published: (2002)
REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
by: Kovalova, J. V.
Published: (2014)
by: Kovalova, J. V.
Published: (2014)
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
by: Petrushin, V. S., et al.
Published: (2012)
by: Petrushin, V. S., et al.
Published: (2012)
Refined calculation of energy modes of a frequency-regulated induction motor
by: Volkov, V. A., et al.
Published: (2024)
by: Volkov, V. A., et al.
Published: (2024)
Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
by: Tran, C. D., et al.
Published: (2024)
by: Tran, C. D., et al.
Published: (2024)
REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
by: Popovych , O., et al.
Published: (2025)
by: Popovych , O., et al.
Published: (2025)
APPROXIMATE CALCULATION OF BASIC CHARACTERISTICS OF PLASMA AT THE AIR ELECTRIC EXPLOSION OF METAL CONDUCTOR
by: Baranov, M. I., et al.
Published: (2017)
by: Baranov, M. I., et al.
Published: (2017)
MODELING THE OPERATION OF A HYDRO–ACCUMULATING POWER PLANT IN THE PUMP MODE AT POWER SUPPLY FROM THE WIND POWER PLANT
by: Verbovij, А.
Published: (2019)
by: Verbovij, А.
Published: (2019)
Power transformer faults diagnosis using undestructive methods (Roger and IEC) and artificial neural network for dissolved gas analysis applied on the functional transformer in the Algerian north-eastern: a comparative study
by: Bouchaoui, L., et al.
Published: (2021)
by: Bouchaoui, L., et al.
Published: (2021)
CRYOGENIC RECEIVING FOCAL UNIT FOR TELESCOPES OF RADIOINTERFEROMETRIC COMPLEX OF NEW GENERATION
by: Ipatov, A. B., et al.
Published: (2014)
by: Ipatov, A. B., et al.
Published: (2014)
Valuation of induction current contribution to the secular variation of geomagnetic field (according to the data of Ukrainian geomagnetic observatories)
by: Orlyuk, M.I., et al.
Published: (2014)
by: Orlyuk, M.I., et al.
Published: (2014)
Wind farms integration into power system with improved location and stability problem solving
by: Hafaiedh, H., et al.
Published: (2025)
by: Hafaiedh, H., et al.
Published: (2025)
ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
by: Batygin, Yu. V., et al.
Published: (2018)
by: Batygin, Yu. V., et al.
Published: (2018)
ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
by: Chenchevoi, V., et al.
Published: (2017)
by: Chenchevoi, V., et al.
Published: (2017)
Optimal hybrid photovoltaic distributed generation and distribution static synchronous compensators planning to minimize active power losses using adaptive acceleration coefficients particle swarm optimization algorithms
by: Labed, M. A., et al.
Published: (2023)
by: Labed, M. A., et al.
Published: (2023)
ANALYSIS OF THE INTERDEPENDENCES OF THE PARAMETERS OF PV MODULES AND THEIR CHANGES AT DIFFERENT LEVELS OF SOLAR RADIATION
by: Gaevskii, O., et al.
Published: (2023)
by: Gaevskii, O., et al.
Published: (2023)
Optimal size and location of distributed generations in distribution networks using bald eagle search algorithm
by: Tebbakh, N., et al.
Published: (2022)
by: Tebbakh, N., et al.
Published: (2022)
ANALYSIS OF THE IMPACT OF DISTRIBUTED GENERATION ON NETWORK OPERATING PARAMETERS
by: Samkov , O., et al.
Published: (2025)
by: Samkov , O., et al.
Published: (2025)
Similar Items
-
HIGH CURRENT HARMONICS INFLUENCE ON THE CHOICE OF CONDUCTORS OF CRANE POWER SUPPLY SYSTEMS
by: Andrienko, P. D., et al.
Published: (2019) -
The high harmonic components of voltage and current of the asynchronous generator with short-circuited rotor winding in small wind and hydroelectric installations
by: Vasko, P., et al.
Published: (2016) -
The ecological safety rise of feed system of transport energy equipment
by: Sudnik V.K., et al.
Published: (2001) -
AN EFFECTIVE CONTROL OF AN ISOLATED INDUCTION GENERATOR SUPPLYING DC LOAD FOR WIND POWER CONVERTING APPLICATIONS
by: Louze, L., et al.
Published: (2020) -
Enhancement of the efficiency of work of a TPP-210A boiler under variable loads at different technologies of dust supply to the burners based on the results of studies of the process of liquid slag removal
by: Kesova L.O., et al.
Published: (2017)