Cover Image

Equivalent cable harness method generalized for predicting the electromagnetic emission of twisted-wire pairs

Introduction. In this paper, the equivalent cable harness method is generalized for predicting the electromagnetic emissions problems of twisted-wire pairs. The novelty of the proposed work consists in modeling of a multiconductor cable, in a simplified cable harness composed of a reduced number of...

Full description

Saved in:

Bibliographic Details
Date:	2022
Main Authors:	Bensiammar, S., Lefouili, M., Belkhelfa, S.
Format:	Article
Language:	English
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2022
Subjects:	electromagnetic emission asymmetric digital subscriber line crosstalk equivalent cable harness method multiconductor transmission line network power loss twisted-wire pairs
Online Access:	http://eie.khpi.edu.ua/article/view/254745
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

ANALYSIS OF FIELD STRUCTURE AND JUSTIFICATION OF VOLTAGES OF DIAGNOSTICS BY PARTIAL DISCHARGES OF SHIELDED TWISTED PAIRS INSULATION
by: Bezprozvannych, G. V., et al.
Published: (2014)

Ensuring standardized parameters for the transmission of digital signals by twisted pairs at the technological stage of manufacturing cables for industrial operating technologies
by: Bezprozvannych, G. V., et al.
Published: (2023)

INCREASING NOISE IMMUNITY OF CABLES FOR FIRE PROTECTION SYSTEMS
by: Bezprozvannych, G. V., et al.
Published: (2020)

Synthesis of an effective system of active shielding of the magnetic field of a power transmission line with a horizontal arrangement of wires using a single compensation winding
by: Kuznetsov, B. I., et al.
Published: (2022)

THE EVALUATION OF POSSIBILITY OF NORMAL OPERATION OF CABLES BASED ON TWISTED PAIRS WITH PVC JACKET UNDER THE CONDITIONS OF HIGH HUMIDITY AND TEMPERATURE
by: Bezprozvannych, G. V., et al.
Published: (2017)

TRANSMISSION OF TERAHERTZ RADIATION THROUGH ONE-DIMENSIONAL WIRE GRATINGS AT DIFFERENT ANGLES OF INCIDENCE
by: Dzyubenko, M. I., et al.
Published: (2020)

ASYMMETRIC SLOT LINES FOR CREATING MILLIMETER-WAVE SEMICONDUCTOR COMPONENTS
by: Karushkin, M. F., et al.
Published: (2025)

Study of the influence of the parameters of modern grounding wires on the value of power losses in them for overhead power lines of 330-750 kV
by: Krasnozhon, A. V., et al.
Published: (2023)

Approximate method for calculating the magnetic field of 330-750 kV high-voltage power line in maintenance area under voltage
by: Rozov, V. Yu., et al.
Published: (2022)

Synthesis of constructive-technological decisions of regulation of working capacitance of cables of industrial networks
by: Bezprozvannych, G.V., et al.
Published: (2021)

The method of multi-objective parametric design of magnetic field active canceling robust system for residential multy-story buildings closed to double-circuit overhead power lines
by: Kuznetsov, B. I., et al.
Published: (2023)

CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING
by: Podoltsev, A. D., et al.
Published: (2018)

Protection of workers against the magnetic field of 330-750 kV overhead power lines when performing work without removing the voltage under load
by: Rozov, V. Yu., et al.
Published: (2024)

PULSED POWER TO MICROWAVES CONVERSION IN NONLINEAR TRANSMISSION LINES
by: Karelin, S. Y., et al.
Published: (2021)

THE INVESTIGATION OF DISTRIBUTION OF THE MAGNETIC FLUX DENSITY OF OPERATING TWO-CIRCUIT POWER LINE 110 KV «CHTPP-CHERNIHIV-330» IN THE RESIDENTIAL AREA AND METHODS OF ITS DECREASING TO A SAFE LEVEL
by: Krasnozhon, A. V., et al.
Published: (2020)

Transmission line planning using global best artificial bee colony method
by: Desai, J. P.
Published: (2023)

RESEARCH AND DEVELOPMENT OF STATE-OF-THE-ART WORLD-CLASS CABLES AND WIRES IN "YUZHCABLE" WORKS PUBLIC COMPANY
by: Zolotaryov, V. M., et al.
Published: (2013)

Destruction of polymer insulation and threshold amplitudes of current pulses of different temporal shapes for electric wires and cables in the low- and high-current circuits of pulse power engineering, electrical engineering and electronic devices
by: Baranov, M.I., et al.
Published: (2021)

A CHOICE OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN POWER CIRCUITS OF ELECTRICAL EQUIPMENT OF POWER INDUSTRY
by: Baranov, M. I.
Published: (2019)

A CHOICE OF SECTIONS OF ELECTRIC WIRES AND CABLES IN CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT IMPULSE TECHNIQUE
by: Baranov, M. I.
Published: (2018)

IMPROVING CALCULATION ACCURACY OF CURRENTS IN CABLE SHIELDS AT DOUBLE-SIDED GROUNDING OF THREE-PHASE CABLE LINE
by: Grinchenko, V. S., et al.
Published: (2017)

THE TIME ELEMENT IN THE STRATEGY OF ELECTRIC GRIDS IMPROVEMENT
by: Cherkashina, V. V.
Published: (2014)

EFFICIENT SHIELDING OF THREE-PHASE CABLE LINE MAGNETIC FIELD BY PASSIVE LOOP UNDER LIMITED THERMAL EFFECT ON POWER CABLES
by: Rozov, V. Yu., et al.
Published: (2019)

Influence of gamma radiation on the electrical and mechanical properties of on-board systems cables
by: Bezprozvannych, G. V., et al.
Published: (2026)

CALCULATION OF MAGNETIC FIELD OF THREE-PHASE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS COVERED BY FERROMAGNETIC CORES
by: Rozov, V. Yu., et al.
Published: (2017)

CALCULATION OF COMPENSATING SUSCEPTANCE FOR A THREE-WIRE NET
by: Sirotin, Iu. A.
Published: (2014)

Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)

Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)

CALCULATION AND EXPERIMENTAL DETERMINATION OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN THE CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT PULSE TECHNIQUE
by: Baranov, M. I.
Published: (2019)

THE RESONANT OVERVOLTAGE IN NON-SINUSOIDAL MODE OF MAIN ELECTRIC NETWORK
by: Kuznetsov, V. G., et al.
Published: (2018)

STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
by: Golik, O. V.
Published: (2016)

DETERMINATION OF ANALYTICAL CALCULATION ERROR OF MAGNETIC FIELD OF HIGH-VOLTAGE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS CAUSED BY NON-UNIFORM CURRENT DISTRIBUTION IN THE SHIELDS
by: Tkachenko, A. O.
Published: (2017)

SINGLE-CIRCUIT ACTIVE SCREENING OF MAGNETIC FIELD GENERATED BY SEVERAL OVERHEAD TRANSMISSION LINES IN RESIDENTIAL AREA
by: Kuznetsov, B. I., et al.
Published: (2018)

Twisted conjugacy classes of Automorphisms of Baumslag-Solitar groups
by: Fel’shtyn, Alexander, et al.
Published: (2018)

Improving the main indicators of transformers with twisted one-piece magnetic cores by changing the technology of circular winding turns formation
by: Avdieieva, O. А., et al.
Published: (2022)

ORTHOGONAL COMPONENTS OF THE THREE-PHASE CURRENT AT ASYMMETRICAL ACTIVE - REACTIVE LOAD IN 4-WIRE CIRCUIT
by: Sirotin, Iu. A.
Published: (2016)

DEVELOPMENT AND INVESTIGATION OF LAYOUT OF ACTIVE SCREENING SYSTEM OF THE MAGNETIC FIELD GENERATED BY GROUP OF OVERHEAD TRANSMISSION LINES
by: Kuznetsov, B. I., et al.
Published: (2018)

Open circuit fault diagnosis for a five-level neutral point clamped inverter in a grid-connected photovoltaic system with hybrid energy storage system
by: Abdellah, A., et al.
Published: (2023)

A CHOICE OF ACCEPTABLE SECTIONS OF ELECTRIC WIRES AND CABLES IN ON-BOARD CIRCUITS OF AIRCRAFT ELECTRICAL EQUIPMENT
by: Baranov, M. I.
Published: (2020)

Minimization of fracture parameters for friction pair hub
by: Мирсалимов, В. М., et al.
Published: (2015)