Analysis and testing of internal combustion engine driven linear alternator
Introduction. Internal combustion engine technology has been considered for the alternator system in the last two decades. Especially when considering fuel diversity, reliability, portability, power density, research studies are increasing day by day. In this respect, interest has been focused on li...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | Arslan, S., Mellah, H. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2023
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/258220 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
Efficiency enhancement strategy implementation in hybrid electric vehicles using sliding mode control
von: Ibrar, A., et al.
Veröffentlicht: (2023)
von: Ibrar, A., et al.
Veröffentlicht: (2023)
Review of research on using hydrogen fuel in an ecologically pure internal combustion engine
von: Пилипенко, С. О.
Veröffentlicht: (2015)
von: Пилипенко, С. О.
Veröffentlicht: (2015)
Review of research on using hydrogen fuel in an ecologically pure internal combustion engine
von: Пилипенко, С. О.
Veröffentlicht: (2015)
von: Пилипенко, С. О.
Veröffentlicht: (2015)
Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
von: Darsouni, Z., et al.
Veröffentlicht: (2025)
von: Darsouni, Z., et al.
Veröffentlicht: (2025)
RESEARCH ON TRANSIENTS AND CHOICE OF OPTIMUM PARAMETERS OF SWITCHING ELEMENTS FOR AN ELECTROMAGNETIC VALVE CONTROL FOR COMBUSTION ENGINE EXHAUST SAMPLING
von: Lavrinenko, O. V.
Veröffentlicht: (2014)
von: Lavrinenko, O. V.
Veröffentlicht: (2014)
Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
von: Kimouche, A., et al.
Veröffentlicht: (2024)
von: Kimouche, A., et al.
Veröffentlicht: (2024)
Digital Program Control and Complex Component Processing in Performance-Driven Production Engineering
von: Petrova, Desislava, et al.
Veröffentlicht: (2025)
von: Petrova, Desislava, et al.
Veröffentlicht: (2025)
PECULIARITIES OF APPLICATION OF THE NORMATIVE DOCUMENTS ON LIMITATION OF POLLUTANT EMISSIONS AT BIOMASS COMBUSTION
von: Zhovmir, M., et al.
Veröffentlicht: (2019)
von: Zhovmir, M., et al.
Veröffentlicht: (2019)
USE OF WIND TURBINE FOR PRODUCE HYDROGEN IN THE COMPOSITION OF AUTONOMOUS FILLING STATIONS OF ELECTRIC VEHICLES ON FUEL CELLS
von: Budko, V., et al.
Veröffentlicht: (2019)
von: Budko, V., et al.
Veröffentlicht: (2019)
APPLICATION OF THEORY CHERK FOR DESCRIPTION OF IMPORTANT PARAMETERS OF THE CHARGING OF ELECTRIC MOBILS FROM RESTORED ENERGY SOURCES
von: Budko, V.
Veröffentlicht: (2017)
von: Budko, V.
Veröffentlicht: (2017)
ECONOMIC ASPECTS OF REALIZATION OF AUTONOMOUS CHARGER STATIONS OF ELECTRIC VEHICLES ON THE BASIS OF WIND TURBINE
von: Budko, V., et al.
Veröffentlicht: (2019)
von: Budko, V., et al.
Veröffentlicht: (2019)
Combustion of pellets from agricultural waste
von: Kyriienko, Petro, et al.
Veröffentlicht: (2025)
von: Kyriienko, Petro, et al.
Veröffentlicht: (2025)
Method of calculation of exhaust gases emissions of biogas engine
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)
Method of calculation of exhaust gases emissions of biogas engine
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)
von: Абрамчук, Ф. И., et al.
Veröffentlicht: (2013)
The analysis of gas-dynamic structure of stream in grates of profiles of axial compressor of turbo-engine
von: Карпик, А. А., et al.
Veröffentlicht: (2015)
von: Карпик, А. А., et al.
Veröffentlicht: (2015)
The analysis of gas-dynamic structure of stream in grates of profiles of axial compressor of turbo-engine
von: Карпик, А. А., et al.
Veröffentlicht: (2015)
von: Карпик, А. А., et al.
Veröffentlicht: (2015)
Analysis of the strategies for managing extended-range electric vehicle powertrain in the urban driving cycle
von: Lasocki, J., et al.
Veröffentlicht: (2022)
von: Lasocki, J., et al.
Veröffentlicht: (2022)
Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)
von: Senani, F., et al.
Veröffentlicht: (2025)
FEATURES OF CREATION OF THE CHARGING STATION NETWORK OF ELECTRIC VEHICLES WITH THE USE OF RENEWABLE ENERGY SOURCES
von: Pavlov, V., et al.
Veröffentlicht: (2022)
von: Pavlov, V., et al.
Veröffentlicht: (2022)
IMPLEMENTATION OF A REAL-TIME FUZZY CONTROL SYSTEM FOR ELECTRIC VEHICLE CHARGING STATIONS BASED ON ARDUINO MEGA 2560 MICROCONTROLLER
von: Bosak, An., et al.
Veröffentlicht: (2023)
von: Bosak, An., et al.
Veröffentlicht: (2023)
RNN-INTEGRATED MODEL PREDICTIVE CONTROL FOR FUEL CELL AND SOLAR-POWERED HYBRID ELECTRIC VEHICLES
von: Divya, G., et al.
Veröffentlicht: (2024)
von: Divya, G., et al.
Veröffentlicht: (2024)
PYROLYSIS FURNACE OF CONTINUOUS COMBUSTION
von: Klyus , V., et al.
Veröffentlicht: (2024)
von: Klyus , V., et al.
Veröffentlicht: (2024)
DEVELOPMENT OF THE OPTIMAL SYSTEM OF CONTROL OF THE TECHNICAL CONDITION OF THE ELECTRIC CAR BATTERY
von: Sorochynsʹkyy , Y., et al.
Veröffentlicht: (2024)
von: Sorochynsʹkyy , Y., et al.
Veröffentlicht: (2024)
Development of mathematical model of operation of autonomous charger station of electric vehicles from vind electric units
von: Budko, V.
Veröffentlicht: (2017)
von: Budko, V.
Veröffentlicht: (2017)
A METHOD OF COMPLEX AUTOMATED MONITORING OF UKRAINIAN POWER ENERGY SYSTEM OBJECTS TO INCREASE ITS OPERATION SAFETY
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
von: Djafer, L., et al.
Veröffentlicht: (2025)
von: Djafer, L., et al.
Veröffentlicht: (2025)
Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
von: Larbi, B., et al.
Veröffentlicht: (2023)
von: Larbi, B., et al.
Veröffentlicht: (2023)
Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)
von: Nemouchi, B., et al.
Veröffentlicht: (2024)
Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)
von: Khemis, A., et al.
Veröffentlicht: (2023)
Analysis of aerotechnogenic pollution of the Vinnytsia using phytoindication methods
von: Тykhenko, Оksana M., et al.
Veröffentlicht: (2022)
von: Тykhenko, Оksana M., et al.
Veröffentlicht: (2022)
NEW INTERNATIONAL SCALE OF THE NEOGENE-QUATERNARY TIME (2010)
von: GOZHIK, P. F., et al.
Veröffentlicht: (2011)
von: GOZHIK, P. F., et al.
Veröffentlicht: (2011)
Thermal utilization of radioactively contaminated wood in Chornobyl zone for power production
von: Klius, V., et al.
Veröffentlicht: (2016)
von: Klius, V., et al.
Veröffentlicht: (2016)
Satellite monitoring problems in the aerospace complex
von: Alpert, Sofiia
Veröffentlicht: (2020)
von: Alpert, Sofiia
Veröffentlicht: (2020)
Main characteristics and perspectives of development of laser gyroscopes
von: Alpert, Sofiia
Veröffentlicht: (2021)
von: Alpert, Sofiia
Veröffentlicht: (2021)
Thermal power engineering. Fuel and ecological issues, and development prospects
von: Канило, П. М., et al.
Veröffentlicht: (2017)
von: Канило, П. М., et al.
Veröffentlicht: (2017)
Thermal power engineering. Fuel and ecological issues, and development prospects
von: Канило, П. М., et al.
Veröffentlicht: (2017)
von: Канило, П. М., et al.
Veröffentlicht: (2017)
ANALYSIS OF SOLAR RADIATION CONCENTRATION PLANTS TO ENSURE THE OPERATION OF THE STIRLING ENGINE
von: Golovko, V., et al.
Veröffentlicht: (2023)
von: Golovko, V., et al.
Veröffentlicht: (2023)
INVESTIGATION OF POSSIBILITIES OF USING KERNELS OF LINEAR AR AND ARMA PROCESSES AS DIAGNOSTIC PARAMETERS OF TECHNICAL CONDITION OF ROTARY NODES OF GENERATORS OF WIND TURBINE
von: Zvaritch, V., et al.
Veröffentlicht: (2022)
von: Zvaritch, V., et al.
Veröffentlicht: (2022)
BRUSHLESS VALVE ELECTRIC DRIVE WITH MINIMUM EQUIPMENT EXCESS FOR AUTONOMOUS FLOATING VEHICLE
von: Volyanskaya, Ya. B., et al.
Veröffentlicht: (2017)
von: Volyanskaya, Ya. B., et al.
Veröffentlicht: (2017)
Development of a genetic method for solution of routing problems with several transport
von: Федорченко, Є. М., et al.
Veröffentlicht: (2023)
von: Федорченко, Є. М., et al.
Veröffentlicht: (2023)
Ähnliche Einträge
-
Efficiency enhancement strategy implementation in hybrid electric vehicles using sliding mode control
von: Ibrar, A., et al.
Veröffentlicht: (2023) -
Review of research on using hydrogen fuel in an ecologically pure internal combustion engine
von: Пилипенко, С. О.
Veröffentlicht: (2015) -
Review of research on using hydrogen fuel in an ecologically pure internal combustion engine
von: Пилипенко, С. О.
Veröffentlicht: (2015) -
Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
von: Darsouni, Z., et al.
Veröffentlicht: (2025) -
RESEARCH ON TRANSIENTS AND CHOICE OF OPTIMUM PARAMETERS OF SWITCHING ELEMENTS FOR AN ELECTROMAGNETIC VALVE CONTROL FOR COMBUSTION ENGINE EXHAUST SAMPLING
von: Lavrinenko, O. V.
Veröffentlicht: (2014)