Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
Introduction. In order to realize an efficient speed control of induction motor, speed sensors, such as encoder, resolver or tachometer may be utilized. However, some problems appear such as, need of shaft extension, which decreases the mechanical robustness of the drive, reduce the reliability, and...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| 1. Verfasser: | Saifi, R. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2023
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/262187 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)
von: Tran, C. D., et al.
Veröffentlicht: (2025)
Sensorless control of switched reluctance motor based on a simple flux linkage model
von: Fan, J., et al.
Veröffentlicht: (2023)
von: Fan, J., et al.
Veröffentlicht: (2023)
Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)
Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)
von: Chaabane, H., et al.
Veröffentlicht: (2022)
Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)
von: Moussaoui, L.
Veröffentlicht: (2022)
Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)
von: Panchal, T. H., et al.
Veröffentlicht: (2022)
Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)
von: Guezi, A., et al.
Veröffentlicht: (2022)
THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
von: Lobov, V. I., et al.
Veröffentlicht: (2017)
von: Lobov, V. I., et al.
Veröffentlicht: (2017)
A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)
Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)
von: Khemis, A., et al.
Veröffentlicht: (2023)
Improve of the direct torque control strategy applied to a multi-phase interior permanent magnet synchronous motor using a super twisting sliding mode algorithm
von: Mehedi, F., et al.
Veröffentlicht: (2025)
von: Mehedi, F., et al.
Veröffentlicht: (2025)
PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
von: Chumak , V., et al.
Veröffentlicht: (2025)
von: Chumak , V., et al.
Veröffentlicht: (2025)
Mitigation of cogging torque in surface permanent magnet brushless DC motor using slot opening shift
von: Patel, A. N., et al.
Veröffentlicht: (2026)
von: Patel, A. N., et al.
Veröffentlicht: (2026)
Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)
von: Patel, A. N.
Veröffentlicht: (2023)
DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)
THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
von: Malyar, V. S., et al.
Veröffentlicht: (2022)
Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
von: Abed, K., et al.
Veröffentlicht: (2024)
von: Abed, K., et al.
Veröffentlicht: (2024)
General theoretical solution of sensorless speed-flux vector control of induction motor
von: S. M. Peresada, et al.
Veröffentlicht: (2016)
von: S. M. Peresada, et al.
Veröffentlicht: (2016)
Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)
von: Malyar, V. S., et al.
Veröffentlicht: (2021)
Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)
von: Nemouchi, B., et al.
Veröffentlicht: (2024)
A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
von: Malyar, V. S., et al.
Veröffentlicht: (2019)
Method of calculation of electromagnetic torque and energy losses of three-phase induction motors when powered by a regulated single-phase voltage
von: Shurub, Yu. V., et al.
Veröffentlicht: (2022)
von: Shurub, Yu. V., et al.
Veröffentlicht: (2022)
Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)
von: Petrushin, V. S.
Veröffentlicht: (2014)
Field programmable gate array hardware in the loop validation of fuzzy direct torque control for induction machine drive
von: Aib, A., et al.
Veröffentlicht: (2023)
von: Aib, A., et al.
Veröffentlicht: (2023)
IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)
Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)
PREMATURE FAILURE OF MEDIUM-POWER TWO-POLE INDUCTION MOTOR WINDINGS
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)
ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)
Optimization of cogging torque in interior permanent magnet synchronous motor using optimum magnet v-angle
von: Patel, A. N., et al.
Veröffentlicht: (2023)
von: Patel, A. N., et al.
Veröffentlicht: (2023)
Refined calculation of energy modes of a frequency-regulated induction motor
von: Volkov, V. A., et al.
Veröffentlicht: (2024)
von: Volkov, V. A., et al.
Veröffentlicht: (2024)
ENERGY-EFFICIENT DOUBLE CAGE INDUCTION MOTOR DESIGN AND SIMULATION FOR RENEWABLE-POWERED ELECTRIC VEHICLES
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)
von: Patel, Dhavalkumar Kantilal, et al.
Veröffentlicht: (2025)
Flux observer adaptive to induction motors active rotor resistance variations
von: S. M. Peresada, et al.
Veröffentlicht: (2022)
von: S. M. Peresada, et al.
Veröffentlicht: (2022)
Forming the induction motor torque when starting
von: O. Khrebtova
Veröffentlicht: (2020)
von: O. Khrebtova
Veröffentlicht: (2020)
INVESTIGATION OF A SENSORLESS WATER SUPPLY SYSTEM FOR EXCESS ENERGY REDISTRI-BUTION FROM WIND TURBINE
von: Zemlianukhina, H., et al.
Veröffentlicht: (2025)
von: Zemlianukhina, H., et al.
Veröffentlicht: (2025)
Invariance of rotor flux observers in direct field-oriented control of induction motors
von: S. M. Peresada, et al.
Veröffentlicht: (2014)
von: S. M. Peresada, et al.
Veröffentlicht: (2014)
A MULTIPURPOSE SWITCHED RELUCTANCE MOTOR WITH A SERIES COMMUTATION BUFFER
von: Vasil'ev, L. A., et al.
Veröffentlicht: (2014)
von: Vasil'ev, L. A., et al.
Veröffentlicht: (2014)
Electromechanical guidance system based on a fuzzy proportional-plus-differential position controller
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)
von: Paranchuk, Ya. S., et al.
Veröffentlicht: (2021)
Adaptive torque control of induction motors with uncertain stator and rotor resistances: design on the base of nonlinear separation principle
von: S. M. Peresada, et al.
Veröffentlicht: (2014)
von: S. M. Peresada, et al.
Veröffentlicht: (2014)
Ähnliche Einträge
-
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025) -
Sensorless control of switched reluctance motor based on a simple flux linkage model
von: Fan, J., et al.
Veröffentlicht: (2023) -
Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023) -
Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022) -
Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)