Sensorless control of switched reluctance motor based on a simple flux linkage model
Introduction. The operation of switched reluctance motor requires prior knowledge of the rotor position, obtaining from either low resolution photocoupler based position sensor or high resolution shaft encoder, to control the on/off states of the power switches. Problem. However, using physical posi...
Saved in:
| Date: | 2023 |
|---|---|
| Main Authors: | Fan, J., Lee, Y. |
| Format: | Article |
| Language: | English |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2023
|
| Subjects: | |
| Online Access: | https://eie.khpi.edu.ua/article/view/262652 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
Dynamic measurement of magnetic characteristics of switched reluctance motor
by: Fan, J., et al.
Published: (2023)
by: Fan, J., et al.
Published: (2023)
Online detection of phase resistance of switched reluctance motor by sinusoidal signal injection
by: Lee, Y.
Published: (2025)
by: Lee, Y.
Published: (2025)
FORMATION OF CHARACTERISTICS OF OPERATING MODES OF SWITCHED RELUCTANCE MOTORS WITH PERIODIC LOAD
by: Bibik, O. V., et al.
Published: (2019)
by: Bibik, O. V., et al.
Published: (2019)
Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
by: Saifi, R.
Published: (2023)
by: Saifi, R.
Published: (2023)
Performance improvement of sensorless scalar and vector control for induction motor drives via an enhanced voltage model
by: Nguyen, P. D., et al.
Published: (2026)
by: Nguyen, P. D., et al.
Published: (2026)
A MULTIPURPOSE SWITCHED RELUCTANCE MOTOR WITH A SERIES COMMUTATION BUFFER
by: Vasil'ev, L. A., et al.
Published: (2014)
by: Vasil'ev, L. A., et al.
Published: (2014)
Sensorless control of switched reluctance motors of traction electromechanical systems
by: O. M. Sinchuk, et al.
Published: (2017)
by: O. M. Sinchuk, et al.
Published: (2017)
Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)
by: Tran, C. D., et al.
Published: (2025)
An enhanced sliding mode observer method applied to sensorless induction motor drives under stator resistance variation
by: Nguyen, Q. T., et al.
Published: (2026)
by: Nguyen, Q. T., et al.
Published: (2026)
Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
by: Liubarskyi, B. G., et al.
Published: (2021)
by: Liubarskyi, B. G., et al.
Published: (2021)
CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
by: Finkelshtein, V. B., et al.
Published: (2016)
by: Finkelshtein, V. B., et al.
Published: (2016)
STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
by: Khlopenko, N. J., et al.
Published: (2017)
by: Khlopenko, N. J., et al.
Published: (2017)
Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
by: Abed, K., et al.
Published: (2024)
by: Abed, K., et al.
Published: (2024)
Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
by: Chaabane, H., et al.
Published: (2022)
by: Chaabane, H., et al.
Published: (2022)
Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
by: Buriakovskyi, S. G., et al.
Published: (2021)
by: Buriakovskyi, S. G., et al.
Published: (2021)
Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
by: Oualah, O., et al.
Published: (2022)
by: Oualah, O., et al.
Published: (2022)
ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
by: Khlopenko, I. N., et al.
Published: (2020)
by: Khlopenko, I. N., et al.
Published: (2020)
General theoretical solution of sensorless speed-flux vector control of induction motor
by: S. M. Peresada, et al.
Published: (2016)
by: S. M. Peresada, et al.
Published: (2016)
INVESTIGATION OF A SENSORLESS WATER SUPPLY SYSTEM FOR EXCESS ENERGY REDISTRI-BUTION FROM WIND TURBINE
by: Zemlianukhina, H., et al.
Published: (2025)
by: Zemlianukhina, H., et al.
Published: (2025)
Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
by: Merlin Suba, G., et al.
Published: (2022)
by: Merlin Suba, G., et al.
Published: (2022)
A power quality enhanced for the wind turbine with sensorless direct power control under different input voltage conditions
by: Laggoun, Z.E.Z., et al.
Published: (2021)
by: Laggoun, Z.E.Z., et al.
Published: (2021)
Designing of switched reluctance motors based on proportional recalculation technique
by: O. V. Bibik
Published: (2019)
by: O. V. Bibik
Published: (2019)
Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
by: Mabrouk, Y. A., et al.
Published: (2023)
by: Mabrouk, Y. A., et al.
Published: (2023)
Super-twisting sliding mode control for brushless doubly fed reluctance generator based on wind energy conversion system
by: Oualah, O., et al.
Published: (2023)
by: Oualah, O., et al.
Published: (2023)
Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
by: Nemouchi, B., et al.
Published: (2024)
by: Nemouchi, B., et al.
Published: (2024)
Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
by: Buriakovskyi, S. G., et al.
Published: (2022)
by: Buriakovskyi, S. G., et al.
Published: (2022)
Sensorless speed control of the direct current motors
by: S. Peresada, et al.
Published: (2021)
by: S. Peresada, et al.
Published: (2021)
The Design of Switched Reluctance Motor for the Purpose of Decrease in Size of Pulsations of the Electromagnetic Torque
by: O. V. Bibik, et al.
Published: (2014)
by: O. V. Bibik, et al.
Published: (2014)
HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
by: Shurub, Yu. V., et al.
Published: (2020)
by: Shurub, Yu. V., et al.
Published: (2020)
The study of control principles of the switched reluctance pumping equipment drive with cyclic load
by: L. I. Mazurenko, et al.
Published: (2022)
by: L. I. Mazurenko, et al.
Published: (2022)
Finite-time robust position tracking control for DC motors under uncertain dynamics
by: Nguyen, Q. B., et al.
Published: (2026)
by: Nguyen, Q. B., et al.
Published: (2026)
COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
by: Teriaiev, V., et al.
Published: (2020)
by: Teriaiev, V., et al.
Published: (2020)
A new stator flow-oriented control method based on type-2 fuzzy logic controllers for permanent magnet synchronous motors
by: Tabbakh, M., et al.
Published: (2026)
by: Tabbakh, M., et al.
Published: (2026)
Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
by: Guezi, A., et al.
Published: (2022)
by: Guezi, A., et al.
Published: (2022)
Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
by: Moussaoui, L.
Published: (2022)
by: Moussaoui, L.
Published: (2022)
The results of an investigation into the application of the micro-stepping mode when controlling a stepper motor
by: Косяк, І. В., et al.
Published: (2022)
by: Косяк, І. В., et al.
Published: (2022)
Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
by: Alnaib, I. I., et al.
Published: (2025)
by: Alnaib, I. I., et al.
Published: (2025)
DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
by: Petrushin, V. S., et al.
Published: (2014)
by: Petrushin, V. S., et al.
Published: (2014)
OPTIMAL CONTROL OF THE ELECTRIC SHIPS’ PROPULSION MOTORS DURING REVERSAL
by: Yarovenko, V. A., et al.
Published: (2018)
by: Yarovenko, V. A., et al.
Published: (2018)
An adaptive controller for power quality control in high speed railway with electric locomotives with asynchronous traction motors
by: Chaib Ras, A., et al.
Published: (2024)
by: Chaib Ras, A., et al.
Published: (2024)
Similar Items
-
Dynamic measurement of magnetic characteristics of switched reluctance motor
by: Fan, J., et al.
Published: (2023) -
Online detection of phase resistance of switched reluctance motor by sinusoidal signal injection
by: Lee, Y.
Published: (2025) -
FORMATION OF CHARACTERISTICS OF OPERATING MODES OF SWITCHED RELUCTANCE MOTORS WITH PERIODIC LOAD
by: Bibik, O. V., et al.
Published: (2019) -
Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
by: Saifi, R.
Published: (2023) -
Performance improvement of sensorless scalar and vector control for induction motor drives via an enhanced voltage model
by: Nguyen, P. D., et al.
Published: (2026)