Buchumschlag

Sensorless control of switched reluctance motor based on a simple flux linkage model

Introduction. The operation of switched reluctance motor requires prior knowledge of the rotor position, obtaining from either low resolution photocoupler based position sensor or high resolution shaft encoder, to control the on/off states of the power switches. Problem. However, using physical posi...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
Hauptverfasser:	Fan, J., Lee, Y.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2023
Schlagworte:	analytical model switched reluctance motor sensorless control
Online Zugang:	http://eie.khpi.edu.ua/article/view/262652
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Dynamic measurement of magnetic characteristics of switched reluctance motor
von: Fan, J., et al.
Veröffentlicht: (2023)

Online detection of phase resistance of switched reluctance motor by sinusoidal signal injection
von: Lee, Y.
Veröffentlicht: (2025)

FORMATION OF CHARACTERISTICS OF OPERATING MODES OF SWITCHED RELUCTANCE MOTORS WITH PERIODIC LOAD
von: Bibik, O. V., et al.
Veröffentlicht: (2019)

A MULTIPURPOSE SWITCHED RELUCTANCE MOTOR WITH A SERIES COMMUTATION BUFFER
von: Vasil'ev, L. A., et al.
Veröffentlicht: (2014)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
von: Finkelshtein, V. B., et al.
Veröffentlicht: (2016)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

INVESTIGATION OF A SENSORLESS WATER SUPPLY SYSTEM FOR EXCESS ENERGY REDISTRI-BUTION FROM WIND TURBINE
von: Zemlianukhina, H., et al.
Veröffentlicht: (2025)

Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
von: Merlin Suba, G., et al.
Veröffentlicht: (2022)

Super-twisting sliding mode control for brushless doubly fed reluctance generator based on wind energy conversion system
von: Oualah, O., et al.
Veröffentlicht: (2023)

STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
von: Khlopenko, N. J., et al.
Veröffentlicht: (2017)

Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
von: Oualah, O., et al.
Veröffentlicht: (2022)

ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
von: Khlopenko, I. N., et al.
Veröffentlicht: (2020)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
von: Abed, K., et al.
Veröffentlicht: (2024)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

A power quality enhanced for the wind turbine with sensorless direct power control under different input voltage conditions
von: Laggoun, Z.E.Z., et al.
Veröffentlicht: (2021)

MATHEMATICAL MODELLING OF TRANSIENTS IN THE ELECTRIC DRIVE OF THE SWITCH – THE MAIN EXECUTIVE ELEMENT OF RAILWAY AUTOMATION
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2020)

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)

Design of single switch-boosted voltage current suppressor converter for uninterrupted power supply using green resources integration
von: Chandramouli, B., et al.
Veröffentlicht: (2022)

AN APPROXIMATE CALCULATION OF ENERGY DISSIPATION AND ELECTRIC EROSION OF ELECTRODES IN THE HIGH-VOLTAGE HIGH-CURRENT AIR SWITCH OF ATMOSPHERIC PRESSURE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

AIR ATMOSPHERIC-PRESSURE DISCHARGERS FOR OPERATION IN HIGH-FREQUENCY SWITCHING MODE.
von: Yevdoshenko, L. S.
Veröffentlicht: (2013)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

RESEARCH OF THE APPLICATIONS POSSIBILITY OF INTERFACE RELAY IN HYBRID SWITCHING SYSTEMS OF BISTABLE ACTUATORS WINDINGS
von: Klymenko, B. V., et al.
Veröffentlicht: (2016)

Method of dynamic parameters for mathematical modelling of switching processes of valves closing of semiconductor converters
von: Vasyliv, K. M.
Veröffentlicht: (2022)

Experimental evaluation of conducted disturbances induced during high frequency switching of active components
von: Slimani, H., et al.
Veröffentlicht: (2023)

REGULATORY CHARACTERISTICS OF THE STEP-DOWN SWITCHING REGULATOR WHICH CHARGES THE BATTERY FROM THE SOLAR BATTERY
von: Romashko, V. Ya., et al.
Veröffentlicht: (2020)

Performance investigations of five-level reduced switches count Η-bridge multilevel inverter
von: Parimalasundar, E., et al.
Veröffentlicht: (2023)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
von: Shurub, Yu. V., et al.
Veröffentlicht: (2020)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

STABILITY AND ACCURACY OF THE ROBUST SYSTEM FOR STABILIZING THE ROTOR FLUX-LINKAGE OF AN ASYNCHRONOUS ELECTRIC DRIVE AT RANDOM VARIATIONS OF THE UNCERTAIN PARAMETERS WITHIN THE SPECIFIED BOUNDARIES
von: Khlopenko, I. N., et al.
Veröffentlicht: (2018)

COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
von: Teriaiev, V., et al.
Veröffentlicht: (2020)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

GENERATION OF STANDARD SWITCHING APERIODIC IMPULSES OF HIGH AND SUPERHIGH VOLTAGE FOR FULL-SCALE TESTS OF ELECTRICAL POWER OBJECTS
von: Baranov, M. I., et al.
Veröffentlicht: (2013)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
von: Lobov, V. I., et al.
Veröffentlicht: (2017)

The results of an investigation into the application of the micro-stepping mode when controlling a stepper motor
von: Косяк, І. В., et al.
Veröffentlicht: (2022)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)