Cover Image

Sensorless control of switched reluctance motor based on a simple flux linkage model

Introduction. The operation of switched reluctance motor requires prior knowledge of the rotor position, obtaining from either low resolution photocoupler based position sensor or high resolution shaft encoder, to control the on/off states of the power switches. Problem. However, using physical posi...

Full description

Saved in:

Bibliographic Details
Date:	2023
Main Authors:	Fan, J., Lee, Y.
Format:	Article
Language:	English
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2023
Subjects:	analytical model switched reluctance motor sensorless control
Online Access:	http://eie.khpi.edu.ua/article/view/262652
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

Dynamic measurement of magnetic characteristics of switched reluctance motor
by: Fan, J., et al.
Published: (2023)

Online detection of phase resistance of switched reluctance motor by sinusoidal signal injection
by: Lee, Y.
Published: (2025)

FORMATION OF CHARACTERISTICS OF OPERATING MODES OF SWITCHED RELUCTANCE MOTORS WITH PERIODIC LOAD
by: Bibik, O. V., et al.
Published: (2019)

A MULTIPURPOSE SWITCHED RELUCTANCE MOTOR WITH A SERIES COMMUTATION BUFFER
by: Vasil'ev, L. A., et al.
Published: (2014)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
by: Saifi, R.
Published: (2023)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
by: Liubarskyi, B. G., et al.
Published: (2021)

CHARACTERISTICS OF A 4-PHASE VALVE RELUCTANCE MOTOR WHEN POWERED BY UNCAPACITOR SWITCHBOARD
by: Finkelshtein, V. B., et al.
Published: (2016)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
by: Tran, C. D., et al.
Published: (2025)

INVESTIGATION OF A SENSORLESS WATER SUPPLY SYSTEM FOR EXCESS ENERGY REDISTRI-BUTION FROM WIND TURBINE
by: Zemlianukhina, H., et al.
Published: (2025)

Design of LLC resonant converter with silicon carbide MOSFET switches and nonlinear adaptive sliding controller for brushless DC motor system
by: Merlin Suba, G., et al.
Published: (2022)

Super-twisting sliding mode control for brushless doubly fed reluctance generator based on wind energy conversion system
by: Oualah, O., et al.
Published: (2023)

STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
by: Khlopenko, N. J., et al.
Published: (2017)

Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
by: Oualah, O., et al.
Published: (2022)

ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
by: Khlopenko, I. N., et al.
Published: (2020)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
by: Abed, K., et al.
Published: (2024)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
by: Buriakovskyi, S. G., et al.
Published: (2021)

A power quality enhanced for the wind turbine with sensorless direct power control under different input voltage conditions
by: Laggoun, Z.E.Z., et al.
Published: (2021)

MATHEMATICAL MODELLING OF TRANSIENTS IN THE ELECTRIC DRIVE OF THE SWITCH – THE MAIN EXECUTIVE ELEMENT OF RAILWAY AUTOMATION
by: Buriakovskyi, S. G., et al.
Published: (2020)

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
by: Chaabane, H., et al.
Published: (2022)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
by: Mabrouk, Y. A., et al.
Published: (2023)

Design of single switch-boosted voltage current suppressor converter for uninterrupted power supply using green resources integration
by: Chandramouli, B., et al.
Published: (2022)

AN APPROXIMATE CALCULATION OF ENERGY DISSIPATION AND ELECTRIC EROSION OF ELECTRODES IN THE HIGH-VOLTAGE HIGH-CURRENT AIR SWITCH OF ATMOSPHERIC PRESSURE
by: Baranov, M. I., et al.
Published: (2017)

AIR ATMOSPHERIC-PRESSURE DISCHARGERS FOR OPERATION IN HIGH-FREQUENCY SWITCHING MODE.
by: Yevdoshenko, L. S.
Published: (2013)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
by: Buriakovskyi, S. G., et al.
Published: (2022)

RESEARCH OF THE APPLICATIONS POSSIBILITY OF INTERFACE RELAY IN HYBRID SWITCHING SYSTEMS OF BISTABLE ACTUATORS WINDINGS
by: Klymenko, B. V., et al.
Published: (2016)

Method of dynamic parameters for mathematical modelling of switching processes of valves closing of semiconductor converters
by: Vasyliv, K. M.
Published: (2022)

Experimental evaluation of conducted disturbances induced during high frequency switching of active components
by: Slimani, H., et al.
Published: (2023)

REGULATORY CHARACTERISTICS OF THE STEP-DOWN SWITCHING REGULATOR WHICH CHARGES THE BATTERY FROM THE SOLAR BATTERY
by: Romashko, V. Ya., et al.
Published: (2020)

Performance investigations of five-level reduced switches count Η-bridge multilevel inverter
by: Parimalasundar, E., et al.
Published: (2023)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
by: Shurub, Yu. V., et al.
Published: (2020)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
by: Panchal, T. H., et al.
Published: (2022)

STABILITY AND ACCURACY OF THE ROBUST SYSTEM FOR STABILIZING THE ROTOR FLUX-LINKAGE OF AN ASYNCHRONOUS ELECTRIC DRIVE AT RANDOM VARIATIONS OF THE UNCERTAIN PARAMETERS WITHIN THE SPECIFIED BOUNDARIES
by: Khlopenko, I. N., et al.
Published: (2018)

COORDINATED CONTROL OF MOTOR-GENERATOR VARIABLES IN THE ELECTRIC BREAKING MODE
by: Teriaiev, V., et al.
Published: (2020)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
by: Petrushin, V. S., et al.
Published: (2014)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
by: Patel, A. N.
Published: (2023)

GENERATION OF STANDARD SWITCHING APERIODIC IMPULSES OF HIGH AND SUPERHIGH VOLTAGE FOR FULL-SCALE TESTS OF ELECTRICAL POWER OBJECTS
by: Baranov, M. I., et al.
Published: (2013)

THE THYRISTOR CONVERTER INFLUENCE ON THE PULSATIONS OF THE ELECTROMAGNETIC TORQUE OF THE INDUCTION MOTOR AT PARAMETRICAL CONTROL
by: Lobov, V. I., et al.
Published: (2017)

The results of an investigation into the application of the micro-stepping mode when controlling a stepper motor
by: Косяк, І. В., et al.
Published: (2022)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
by: Guezi, A., et al.
Published: (2022)