Active rectifier with a fixed modulation frequency and a vector control system in the mode of bidirectional energy flow

Goal. Creation of a vector control system with improved characteristics for an active rectifier-voltage source operating in the bidirectional energy flow mode with a with a fixed modulation frequency. Methodology. The physical prerequisites for the active rectifier - voltage source operation in the...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2023
Автори: Krylov, D. S., Kholod, O. I.
Формат: Стаття
Мова:English
Ukrainian
Опубліковано: National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine” 2023
Теми:
Онлайн доступ:http://eie.khpi.edu.ua/article/view/275218
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Electrical Engineering & Electromechanics

Репозитарії

Electrical Engineering & Electromechanics
Опис
Резюме:Goal. Creation of a vector control system with improved characteristics for an active rectifier-voltage source operating in the bidirectional energy flow mode with a with a fixed modulation frequency. Methodology. The physical prerequisites for the active rectifier - voltage source operation in the system of a medium-power frequency electric drive are considered. A vector control system with a fixed modulation frequency is constructed, the principles of forming the signals acting in it and the influence on its operation of the converter power circuit parameters and the power consumed by it are considered. Mathematical modeling of the converter with the developed control system in MATLAB/Simulink made it possible to verify the correctness of the operation of the power circuit and the control system. Results. A new structure of a vector control system operating with a fixed modulation frequency is proposed, and the performance characteristics of the circuit in a wide range of changes in the magnitude and sign of the output power are obtained. The advantages of the new control system over the existing ones are shown. Originality. The physical prerequisites for the functioning of the power scheme and the vector control system of the ARVS proposed by the authors with a fixed frequency of modulation, the principles of forming the signals operating within it are considered in detail. Practical significance. New structure of the vector control system operating with a fixed modulation frequency is proposed and the advantages of the new control system over the existing ones are shown.