Buchumschlag

RESEARCH ON ADDED INDUCTANCE AND RESISTANCE DURING SPIRAL FERROMAGNETIC WIRE SCANNING WITH MAGNETIC FIELD OF A PARAMETRIC EDDY-CURRENT SENSOR

Criteria for estimation of added inductance and resistance during spiral ferromagnetic wire scanning of single-core power cable armour by means of a parametric electromagnetic converter are proposed. Research into variation of the introduced criteria in the frequency range from 100 Hz up to 100 kHz...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	Kostiukov, I. A.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2014
Schlagworte:	power cable spiral wire armour axial magnetic permeability eddy-current sensor 620.179.14
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2014.5.04
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
von: Kostiukov, I. A.
Veröffentlicht: (2014)

Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
von: Мягкохлеб, К. Б., et al.
Veröffentlicht: (2018)

Analysis of an electromagnetic eddy current sensor of a flaw detector with an Ш-shaped core
von: Мягкохлеб, К. Б., et al.
Veröffentlicht: (2018)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

DEVELOPMENT OF EXCITATION STRUCTURE RBF-METAMODELS OF MOVING CONCENTRIC EDDY CURRENT PROBE
von: Halchenko, V. Ya., et al.
Veröffentlicht: (2019)

The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)

The system of diagnostic of a thermostressed state and operation of a resource for a rotor of a high pressure of turbine T-250/300-240 on stationary and variable operat-ing modes
von: Шульженко, Николай Григорьевич, et al.
Veröffentlicht: (2015)

An application of multi-magnetic circular planar spiral relay to improve the performance of wireless power transfer system
von: Irwanto, M., et al.
Veröffentlicht: (2024)

RAPID NONDESTRUCTIVE MECHANICAL STRESS CONTROL
von: Bezotosniy, V. F., et al.
Veröffentlicht: (2013)

Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)

Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)

TWO-DIMENSIONAL FEM-ANALYSIS OF EDDY CURRENTS LOSS IN LAMINATED MAGNETIC CIRCUITS
von: Makarchuk, O. V., et al.
Veröffentlicht: (2019)

Study of the piezoelectric sensor KD-35 properties on the calibration device by the method of external pulse and on a real Earth track
von: Shcherbina, S.V., et al.
Veröffentlicht: (2016)

SUBPIXEL SCANNING FOR SPECTRUM IMAGE ANALYSIS
von: Yegorov, S. A., et al.
Veröffentlicht: (2024)

FEATURES OF EDDY CURRENT DISTRIBUTION IN A HOLLOW PERFORATED ROTOR OF A POLYFUNCTIONAL ELECTROMECHANICAL CONVERTER
von: Zablodskii, N. N., et al.
Veröffentlicht: (2013)

An application of membrane sensors in hydrolocation systems using digital laser interferometers
von: Britsky, A. I., et al.
Veröffentlicht: (2019)

Transformation of wave field by permeable vertical wall
von: Voskoboinick, Volodymyr A., et al.
Veröffentlicht: (2024)

OPTICAL SENSOR FOR SURFACE PROFILE MONITORING OF PARABOLIC ANTENNA FOR MILLIMETER AND SUBMILLIMETER ASTRONOMY
von: Chechetkin, D. L., et al.
Veröffentlicht: (2016)

GENERAL QUESTIONS AS TO PROVIDING ELECTROMAGNETIC COMPATIBILITY OF POWER CABLE LINES, THEIR AMPERAGE CAPACITY AND TYPES OF SHIELD CONSTRUCTION
von: Kostiukov, I. A.
Veröffentlicht: (2013)

Research of functioning processes of wireless sensor networks
von: Semko, Viktor V., et al.
Veröffentlicht: (2021)

A FIBER-OPTIC HYDROACOUSTIC PRESSURE SENSOR BASED ON INTERMODE INTERFERENCE
von: Linchevskyi, I. V., et al.
Veröffentlicht: (2025)

Sensors placement for the faults detection and isolation based on bridge linked configuration of photovoltaic array
von: Latreche, S., et al.
Veröffentlicht: (2022)

Computer-economical optimization method for solving inverse problems of determining electrophysical properties of objects in eddy current structroscopy
von: Halchenko, V. Ya., et al.
Veröffentlicht: (2025)

Interaction of gravitational waves with permeable breakwater
von: Selezov, Igor T., et al.
Veröffentlicht: (2022)

Integrity of information in the systems of vibrations analysis and reliability of its selection
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)

Integrity of information in the systems of vibrations analysis and reliability of its selection
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

PIEZOELECTRIC WAVEGUIDE SENSOR FOR MEASURING PULSE PRESSURE IN CLOSED LIQUID VOLUMES AT HIGH VOLTAGE ELECTRIC DISCHARGE
von: Zhekul, V. G., et al.
Veröffentlicht: (2017)

FREE-SPACE PROPAGATION OF TERAHERTZ LASER VORTEX BEAMS
von: Degtyarev, A. V., et al.
Veröffentlicht: (2024)

A METHOD OF REDUCING THE ERROR IN DETERMINING THE ANGULAR DISPLACEMENTS WHEN USING INDUCTIVE SENSORS
von: Snitkov, K. I., et al.
Veröffentlicht: (2020)

Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)

Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)

POWERFUL SOURCES OF PULSE HIGH-FREQUENCY ELECTROMECHANICAL TRANSDUCERS FOR MEASUREMENT, TESTING AND DIAGNOSTICS
von: Plesnetsov, S. Yu., et al.
Veröffentlicht: (2018)

The mutual influence of exciting and induced currents in the circular solenoid – massive conductor system
von: Batygin, Yu. V., et al.
Veröffentlicht: (2023)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

The growth function of the adding machine
von: Skochko, Volodymyr
Veröffentlicht: (2018)