RESEARCH ON TRANSIENTS AND CHOICE OF OPTIMUM PARAMETERS OF SWITCHING ELEMENTS FOR AN ELECTROMAGNETIC VALVE CONTROL FOR COMBUSTION ENGINE EXHAUST SAMPLING
The article introduces a classical-method-based analysis procedure for transients in the control cascade of an electromagnetic valve for combustion engine exhaust sampling. Analytical expressions for currents and voltage on the cascade basic elements are obtained to allow specifying the optimal para...
Збережено в:
| Видавець: | National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine” |
|---|---|
| Дата: | 2014 |
| Автор: | |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
National Technical University "Kharkiv Polytechnic Institute" and State Institution “Institute of Technical Problems of Magnetism of the National Academy of Sciences of Ukraine”
2014
|
| Теми: | |
| Онлайн доступ: | http://eie.khpi.edu.ua/article/view/2074-272X.2014.5.05 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Репозиторії
Electrical Engineering & Electromechanics| Резюме: | The article introduces a classical-method-based analysis procedure for transients in the control cascade of an electromagnetic valve for combustion engine exhaust sampling. Analytical expressions for currents and voltage on the cascade basic elements are obtained to allow specifying the optimal parameters of these elements in terms of speed and reliability. |
|---|