Buchumschlag

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS

The paper presents automated optimization designing of regulated induction motors accomplished for a variety of design problems under two range criteria. Design tasks involve consideration of both static and dynamic modes. Dependence of change in the motors variable parameters on the criterion chose...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Petrushin, V. S., Jenoktajev, R. N.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2014
Schlagworte:	controlled induction motor design range criteria automated optimization designing 621.313.333.2
Online Zugang:	http://eie.khpi.edu.ua/article/view/2074-272X.2014.5.06
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)

MODELING CONTROLLED ASYNCHRONOUS ELECTRIC DRIVES WITH MATCHING REDUCERS AND TRANSFORMERS
von: Petrushin, V. S., et al.
Veröffentlicht: (2015)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)

Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2026)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
von: Petrushin, V. S., et al.
Veröffentlicht: (2019)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)

ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
von: Oshurbekov, S. Kh., et al.
Veröffentlicht: (2020)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Optimization of loading modes of a controlled asynchronous electric drive
von: Kanov, L. N.
Veröffentlicht: (2013)

USING OF OBJECT-ORIENTED DESIGN PRINCIPLES IN ELECTRIC MACHINES DEVELOPMENT
von: Zablodskii, N. N., et al.
Veröffentlicht: (2016)

Fractional-based iterative learning-optimal model predictive control of speed induction motor regulation for electric vehicles application
von: Nemouchi, B., et al.
Veröffentlicht: (2024)

STUDY OF FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR UNITS TEMPERATURE VERSUS LOAD AND POWER SUPPLY TYPE
von: Vakaruk, T. V., et al.
Veröffentlicht: (2014)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
von: Abed, K., et al.
Veröffentlicht: (2024)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

OPTIMIZATION NOISE STABILITY BASED APPROACH TO CHANNEL ROUTING
von: Ivanov, V. G.
Veröffentlicht: (2014)

METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 49: AIRCRAFT DESIGNER OLEG ANTONOV AND HIS ACCOMPLISHMENTS IN AIRPLANE DESIGN
von: Baranov, M. I.
Veröffentlicht: (2019)

Additional power loss in a frequency-controlled induction motor due to voltage higher harmonics
von: Petrenko, A. N., et al.
Veröffentlicht: (2012)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Nonlinear vector control of multiphase induction motor using linear quadratic regulator and active disturbances rejection control under disturbances and parameter variations
von: Rezgui, S. E., et al.
Veröffentlicht: (2025)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)

HARMONIC ANALYSIS OF THE COMBINED CIRCUIT OF SINGLE-PHASE SWITCHING OF INDUCTION ELECTRIC DRIVE WITH THYRISTOR CONTROL
von: Shurub, Yu. V., et al.
Veröffentlicht: (2020)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

IMITATION MODEL OF A HIGH-SPEED INDUCTION MOTOR WITH FREQUENCY CONTROL
von: Pliugin, V. E., et al.
Veröffentlicht: (2017)

Sustainable approach to designing window profiles to reduce environmental impact
von: Kozhevnikov, Sergii, et al.
Veröffentlicht: (2025)

Design and implementation of the unified control module for a sustainable operation of the combined renewable energy system
von: Volodarskyi, V., et al.
Veröffentlicht: (2017)

Digital Program Control and Complex Component Processing in Performance-Driven Production Engineering
von: Petrova, Desislava, et al.
Veröffentlicht: (2025)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Smoke flow design to experiment_FEM
von: Kolesnyk, Vitalii, et al.
Veröffentlicht: (2026)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)

A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016)

OPTIMAL CONTROL OF THE ELECTRIC SHIPS’ PROPULSION MOTORS DURING REVERSAL
von: Yarovenko, V. A., et al.
Veröffentlicht: (2018)