Buchumschlag

Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction

Introduction. The drive electric motor is one of the key components in the traction chain of an electric vehicle. Traditional radial flux motors used in electric vehicles, which use permanent magnets or induction motors in an electric field, are experiencing significant development aimed at optimizi...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2023
Hauptverfasser:	Larbi, B., Hatti, M., Kouzi, K., Ghadbane, A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2023
Schlagworte:	axial flux permanent magnet machine electric vehicle finite element method TORUS-NS
Online Zugang:	http://eie.khpi.edu.ua/article/view/281117
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

TORUS HYSTERESIS
von: Vavriv, D. M., et al.
Veröffentlicht: (2014)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
von: Kovalenko , M., et al.
Veröffentlicht: (2024)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
von: Kimouche, A., et al.
Veröffentlicht: (2024)

Influence of the shape of the input pulses on the characteristics of hybrid electromagnetic system with magnetic flux modulation
von: Yatchev, I., et al.
Veröffentlicht: (2021)

Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter
von: Bounab, A., et al.
Veröffentlicht: (2026)

CLOUD DISTRIBUTION IN OBSCURING TORI OF ACTIVE GALACTIC NUCLEI
von: Bannikova, E. Yu.
Veröffentlicht: (2015)

INCREASE OF ENERGY EFFICIENCY OF TESTING OF TRACTION ELECTRIC MACHINES OF DIRECT AND PULSATING CURRENT
von: Afanasov, A. M.
Veröffentlicht: (2015)

THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2017)

COMPARISON OF TRADITIONAL PERMANENT MAGNET GENERATOR AND AXIAL FLUX PERMANENT MAGNET GENERATOR WITH DOUBLE-SIDED ACTIVE SURFACE FOR WIND TURBINE
von: Golovko, V., et al.
Veröffentlicht: (2018)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
von: Nayli, A., et al.
Veröffentlicht: (2026)

DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
von: Afanasov, A. M.
Veröffentlicht: (2012)

PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
von: Permynov, Y., et al.
Veröffentlicht: (2018)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
von: Pliugin, V. E., et al.
Veröffentlicht: (2019)

Fault tolerant control of a permanent magnet synchronous machine using multiple constraints Takagi-Sugeno approach
von: Moussaoui, L., et al.
Veröffentlicht: (2022)

Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
von: Djafer, L., et al.
Veröffentlicht: (2025)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

PERIODIC AND SPORADIC VARIATIONS IN THE SPECTRAL FLUX DENSITY OF THE CAS A SUPERNOVA REMNANT
von: Gorbunov, A. A., et al.
Veröffentlicht: (2020)

SENSORLESS DIRECT POWER CONTROL FOR THREE-PHASE GRID SIDE CONVERTER INTEGRATED INTO WIND TURBINE SYSTEM UNDER DISTURBED GRID VOLTAGES
von: Boukhechem, I., et al.
Veröffentlicht: (2020)

STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
von: Khlopenko, N. J., et al.
Veröffentlicht: (2017)

MODELING OF TRACTION SYNCHRONOUS PERMANENT MAGNET MOTOR MODES
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
von: Panchenko, V. I., et al.
Veröffentlicht: (2016)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)

Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)

Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
von: Ben Slimene, Marwa
Veröffentlicht: (2020)

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
von: L’Hadj Said, M., et al.
Veröffentlicht: (2025)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

The growth function of the adding machine
von: Skochko, Volodymyr
Veröffentlicht: (2018)

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
von: Kostiukov, I. A.
Veröffentlicht: (2014)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)

ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
von: Khlopenko, I. N., et al.
Veröffentlicht: (2020)

Anti-tori in quaternionic lattices over \(\mathbb{F}_q(t)\)
von: Bondarenko, Ievgen, et al.
Veröffentlicht: (2024)

PARAMETERS OF DIRECT SOLAR ENERGY FLUX IN CLEAR SKY TAKEN INTO ACCOUNT OF ATMOSPHERE TRANSPARENCY
von: Halchak, V., et al.
Veröffentlicht: (2019)