Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
Introduction. The drive electric motor is one of the key components in the traction chain of an electric vehicle. Traditional radial flux motors used in electric vehicles, which use permanent magnets or induction motors in an electric field, are experiencing significant development aimed at optimizi...
Saved in:
| Date: | 2023 |
|---|---|
| Main Authors: | Larbi, B., Hatti, M., Kouzi, K., Ghadbane, A. |
| Format: | Article |
| Language: | English |
| Published: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2023
|
| Subjects: | |
| Online Access: | http://eie.khpi.edu.ua/article/view/281117 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsSimilar Items
TORUS HYSTERESIS
by: Vavriv, D. M., et al.
Published: (2014)
by: Vavriv, D. M., et al.
Published: (2014)
Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
by: Patel, A. N.
Published: (2023)
by: Patel, A. N.
Published: (2023)
DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
by: Kovalenko , M., et al.
Published: (2024)
by: Kovalenko , M., et al.
Published: (2024)
COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020)
by: Prakht, V. A., et al.
Published: (2020)
Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
by: Kimouche, A., et al.
Published: (2024)
by: Kimouche, A., et al.
Published: (2024)
Influence of the shape of the input pulses on the characteristics of hybrid electromagnetic system with magnetic flux modulation
by: Yatchev, I., et al.
Published: (2021)
by: Yatchev, I., et al.
Published: (2021)
Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter
by: Bounab, A., et al.
Published: (2026)
by: Bounab, A., et al.
Published: (2026)
CLOUD DISTRIBUTION IN OBSCURING TORI OF ACTIVE GALACTIC NUCLEI
by: Bannikova, E. Yu.
Published: (2015)
by: Bannikova, E. Yu.
Published: (2015)
INCREASE OF ENERGY EFFICIENCY OF TESTING OF TRACTION ELECTRIC MACHINES OF DIRECT AND PULSATING CURRENT
by: Afanasov, A. M.
Published: (2015)
by: Afanasov, A. M.
Published: (2015)
THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
by: Bezprozvannych, G. V., et al.
Published: (2017)
by: Bezprozvannych, G. V., et al.
Published: (2017)
COMPARISON OF TRADITIONAL PERMANENT MAGNET GENERATOR AND AXIAL FLUX PERMANENT MAGNET GENERATOR WITH DOUBLE-SIDED ACTIVE SURFACE FOR WIND TURBINE
by: Golovko, V., et al.
Published: (2018)
by: Golovko, V., et al.
Published: (2018)
Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
by: Liubarskyi, B. G., et al.
Published: (2021)
by: Liubarskyi, B. G., et al.
Published: (2021)
Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
by: Nayli, A., et al.
Published: (2026)
by: Nayli, A., et al.
Published: (2026)
DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
by: Afanasov, A. M.
Published: (2012)
by: Afanasov, A. M.
Published: (2012)
PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
by: Permynov, Y., et al.
Published: (2018)
by: Permynov, Y., et al.
Published: (2018)
Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
by: Senani, F., et al.
Published: (2025)
by: Senani, F., et al.
Published: (2025)
IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
by: Pliugin, V. E., et al.
Published: (2019)
by: Pliugin, V. E., et al.
Published: (2019)
Fault tolerant control of a permanent magnet synchronous machine using multiple constraints Takagi-Sugeno approach
by: Moussaoui, L., et al.
Published: (2022)
by: Moussaoui, L., et al.
Published: (2022)
Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
by: Djafer, L., et al.
Published: (2025)
by: Djafer, L., et al.
Published: (2025)
Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
by: Луговая, С. О., et al.
Published: (2015)
by: Луговая, С. О., et al.
Published: (2015)
Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
by: Луговая, С. О., et al.
Published: (2015)
by: Луговая, С. О., et al.
Published: (2015)
PERIODIC AND SPORADIC VARIATIONS IN THE SPECTRAL FLUX DENSITY OF THE CAS A SUPERNOVA REMNANT
by: Gorbunov, A. A., et al.
Published: (2020)
by: Gorbunov, A. A., et al.
Published: (2020)
SENSORLESS DIRECT POWER CONTROL FOR THREE-PHASE GRID SIDE CONVERTER INTEGRATED INTO WIND TURBINE SYSTEM UNDER DISTURBED GRID VOLTAGES
by: Boukhechem, I., et al.
Published: (2020)
by: Boukhechem, I., et al.
Published: (2020)
STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
by: Khlopenko, N. J., et al.
Published: (2017)
by: Khlopenko, N. J., et al.
Published: (2017)
MODELING OF TRACTION SYNCHRONOUS PERMANENT MAGNET MOTOR MODES
by: Vaskovskyi, Yu. M., et al.
Published: (2013)
by: Vaskovskyi, Yu. M., et al.
Published: (2013)
MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
by: Panchenko, V. I., et al.
Published: (2016)
by: Panchenko, V. I., et al.
Published: (2016)
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
Analytical method of profiling axial-radial compressor impellers
by: Rusanov, A. V., et al.
Published: (2019)
by: Rusanov, A. V., et al.
Published: (2019)
Analytical method of profiling axial-radial compressor impellers
by: Rusanov, A. V., et al.
Published: (2019)
by: Rusanov, A. V., et al.
Published: (2019)
Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
by: Бойко, А. В., et al.
Published: (2015)
by: Бойко, А. В., et al.
Published: (2015)
Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
by: Бойко, А. В., et al.
Published: (2015)
by: Бойко, А. В., et al.
Published: (2015)
PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
by: Ben Slimene, Marwa
Published: (2020)
by: Ben Slimene, Marwa
Published: (2020)
Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load
by: L’Hadj Said, M., et al.
Published: (2025)
by: L’Hadj Said, M., et al.
Published: (2025)
COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
The growth function of the adding machine
by: Skochko, Volodymyr
Published: (2018)
by: Skochko, Volodymyr
Published: (2018)
EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
by: Kostiukov, I. A.
Published: (2014)
by: Kostiukov, I. A.
Published: (2014)
A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
by: Somka, O. O., et al.
Published: (2015)
by: Somka, O. O., et al.
Published: (2015)
ANALYSIS AND VERIFICATION OF THE OPERATION OF THE STABILIZING ROBUST CONTROLLER'S ELECTRICAL CIRCUIT OF THE ROTOR FLUX-LINKAGE CONTROL SYSTEM
by: Khlopenko, I. N., et al.
Published: (2020)
by: Khlopenko, I. N., et al.
Published: (2020)
Anti-tori in quaternionic lattices over \(\mathbb{F}_q(t)\)
by: Bondarenko, Ievgen, et al.
Published: (2024)
by: Bondarenko, Ievgen, et al.
Published: (2024)
PARAMETERS OF DIRECT SOLAR ENERGY FLUX IN CLEAR SKY TAKEN INTO ACCOUNT OF ATMOSPHERE TRANSPARENCY
by: Halchak, V., et al.
Published: (2019)
by: Halchak, V., et al.
Published: (2019)
Similar Items
-
TORUS HYSTERESIS
by: Vavriv, D. M., et al.
Published: (2014) -
Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
by: Patel, A. N.
Published: (2023) -
DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
by: Kovalenko , M., et al.
Published: (2024) -
COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020) -
Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
by: Kimouche, A., et al.
Published: (2024)