Buchumschlag

Control of an autonomous wind energy conversion system based on doubly fed induction generator supplying a non-linear load

Introduction. Nowadays, many researches are being done on wind turbines providing electrical energy to a stable power grid by via a doubly fed induction generator (DFIG), but the studies on the autonomous networks are rare, due the difficulty of controlling powers often close to the nominal power of...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
Hauptverfasser:	L’Hadj Said, M., Ali Moussa, M., Bessaad, T.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2025
Schlagworte:	doubly fed induction generator wind power variable speed autonomous operation permanent magnet synchronous machine
Online Zugang:	http://eie.khpi.edu.ua/article/view/317847
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Super-twisting sliding mode control for brushless doubly fed reluctance generator based on wind energy conversion system
von: Oualah, O., et al.
Veröffentlicht: (2023)

Effect of short-circuit in stator windings on the operation of doubly-fed induction generators operating in a wind power system
von: Diboune, Y., et al.
Veröffentlicht: (2025)

Comparative study between sliding mode control and the vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems
von: Oualah, O., et al.
Veröffentlicht: (2022)

Robust fault-tolerant sliding mode control and advanced fault diagnosis for doubly-fed induction generators
von: Hamdi, N., et al.
Veröffentlicht: (2025)

Indirect active and reactive powers control of doubly fed induction generator fed by three-level adaptive-network-based fuzzy inference system – pulse width modulation converter with a robust method based on super twisting algorithms
von: Benbouhenni, H., et al.
Veröffentlicht: (2021)

An improved sliding mode control for reduction of harmonic currents in grid system connected with a wind turbine equipped by a doubly-fed induction generator
von: Bouraghda, S., et al.
Veröffentlicht: (2022)

USING AN UNINTERRUPTED POWER SUPPLY TO REDUCE THE OPERATING COSTS OF AN AUTONOMOUS ELECTRIC GENERATOR
von: Kovalenko , M., et al.
Veröffentlicht: (2025)

DESIGN COMPARISON OF SYNCHRONOUS PERMANENT MAGNET GENERATOR FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2019)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

Maximum power point tracking improvement using type-2 fuzzy controller for wind system based on the double fed induction generator
von: Kaddache, M., et al.
Veröffentlicht: (2024)

Direct power control using space vector modulation strategy control for wind energy conversion system using three-phase matrix converter
von: Boukadoum, A., et al.
Veröffentlicht: (2023)

A novel scheme for control by active and reactive power utilized in gearless variable speed wind turbine system with PMSG connected to the grid
von: Ghanem, S., et al.
Veröffentlicht: (2022)

SLIDING MODE CONTROL OF THE DFIG USED IN WIND ENERGY SYSTEM
von: Glaoui, Hachemi, et al.
Veröffentlicht: (2018)

Maximum power control of a wind generator with an energy storage system to fix the delivered power
von: Boumassata, A., et al.
Veröffentlicht: (2022)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

COMPARISON OF PARAMETERS OF ASYNCHRONOUS AND SYNCHRONOUS ELECTRIC GENERATORS WITH PERMANENT MAGNETS EXCITATION FOR WIND TURBINES
von: Permynov, Y., et al.
Veröffentlicht: (2021)

Determination of parameters of an autonomous source of a constant magnetic field for a portable electromagnetic-acoustic transducer
von: Bolyukh, V. F., et al.
Veröffentlicht: (2025)

A NEW ROBUST CONTROL USING ADAPTIVE FUZZY SLIDING MODE CONTROL FOR A DFIG SUPPLIED BY A 19-LEVEL INVERTER WITH LESS NUMBER OF SWITCHES
von: Benkahla, Mohamed, et al.
Veröffentlicht: (2018)

OPERATION OF PERMANENT MAGNET SYNCHRONOUS GENERATOR APPLIED TO THE GRID CONNECTED WIND TURBINES
von: Permynov, Yu., et al.
Veröffentlicht: (2022)

COMPARISON OF CHARACTERISTICS OF THE CONVERTER-FED MOTOR AT SUPPLY FROM THE SINGLE-PHASE NETWORK AND FROM THE SOURCE OF THE DIRECT CURRENT
von: Finkelshtein, V. B., et al.
Veröffentlicht: (2015)

Wind farms integration into power system with improved location and stability problem solving
von: Hafaiedh, H., et al.
Veröffentlicht: (2025)

Autonomous digital seismic stations SV
von: Gryn, D. M., et al.
Veröffentlicht: (2019)

SIMULATION OF PARALLEL WORK OF ASYNCHRONOUS GENERATORS IN AUTONOMOUS INSTALLATION FOR CHARGING BATTERIES
von: Holovko, V., et al.
Veröffentlicht: (2018)

Electric drive vehicle based on sliding mode control technique using a 21-level asymmetrical inverter under different operating conditions
von: Djafer, L., et al.
Veröffentlicht: (2025)

Algorithm for calculating synchronous end design generators with located at stator ends two magnetic systems for wind turbines
von: Permynov, Y., et al.
Veröffentlicht: (2016)

Comparative analysis between classical and third-order sliding mode controllers for maximum power extraction in wind turbine system
von: Bourouina, A., et al.
Veröffentlicht: (2025)

Some features of autonomous work of wind and solar power stations
von: Kuznietsov, M.
Veröffentlicht: (2016)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

OPERATION OF THE SYNCHRONOUS GENERATOR WITH PERMANENT MAGNETS DURING THE MAGNETIZATION OF A SIDE CAPACITY
von: Kovalenko, I
Veröffentlicht: (2021)

Improvement of voltage stability for grid connected solar photovoltaic systems using static synchronous compensator with recurrent neural network
von: Praveen Kumar, T., et al.
Veröffentlicht: (2022)

INVESTIGATION OF THE INFLUENCE OF THE PARAMETERS OF THE WIND FLOW ON THE CHOICE OF THE CHARACTERISTICS OF THE AUTONOMOUS WIND TURBINE
von: Gonsharenko, Yu., et al.
Veröffentlicht: (2022)

DESIGN PERMANENT MAGNET WINDGENERATOR OF INCREASED POWER (600÷3600) KW
von: Permynov, Y., et al.
Veröffentlicht: (2020)

ECONOMIC ASPECTS OF REALIZATION OF AUTONOMOUS CHARGER STATIONS OF ELECTRIC POWER BASED ON PHOTOELECTRIC BATTERIES
von: Budko, V. I., et al.
Veröffentlicht: (2018)

ECONOMIC ASPECTS OF REALIZATION OF AUTONOMOUS CHARGER STATIONS OF ELECTRIC VEHICLES ON THE BASIS OF WIND TURBINE
von: Budko, V., et al.
Veröffentlicht: (2019)

Exploration and extraction of deep minerals without mines and quarries with the help of nuclear autonomous thermal drills-geoprodes
von: Vashchenko, Volodymyr M., et al.
Veröffentlicht: (2023)

Realization of a stochastic two-parameter model of the longitudinal component of the wind speed for wind energy problems
von: Vasko, P., et al.
Veröffentlicht: (2017)

Smart current control of the wind energy conversion system based permanent magnet synchronous generator using predictive and hysteresis model
von: Zine, H. K. E., et al.
Veröffentlicht: (2024)

USE OF WIND TURBINE FOR PRODUCE HYDROGEN IN THE COMPOSITION OF AUTONOMOUS FILLING STATIONS OF ELECTRIC VEHICLES ON FUEL CELLS
von: Budko, V., et al.
Veröffentlicht: (2019)

The influence of the design of the stator winding of a synchronous-reactive generator on increasing its energy efficiency
von: Iegorov, O. B., et al.
Veröffentlicht: (2025)

MAGNETIC PROPERTIES OF MULTICOMPONENT HETEROGENEOUS MEDIA WITH A DOUBLY PERIODIC STRUCTURE
von: Tolmachev, S. T., et al.
Veröffentlicht: (2020)