Buchumschlag

Improved speed sensorless control for induction motor drives using rotor flux angle estimation

Introduction. In the typical field-oriented control (FOC) method, the variation of machine resistance is not considered when calculating the rotor flux angle. This omission affects the accuracy of the control method during motor operation, leading to potential performance degradation. Problem. Negle...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
Hauptverfasser:	Tran, C. D., Kuchar, M., Nguyen, P. D.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2025
Schlagworte:	induction motor drive field-oriented control model reference adaptive system stator resistance
Online Zugang:	https://eie.khpi.edu.ua/article/view/323045
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

Performance improvement of sensorless scalar and vector control for induction motor drives via an enhanced voltage model
von: Nguyen, P. D., et al.
Veröffentlicht: (2026)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

Research for an enhanced fault-tolerant solution against the current sensor fault types in induction motor drives
von: Tran, C. D., et al.
Veröffentlicht: (2024)

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control
von: Chaabane, H., et al.
Veröffentlicht: (2022)

Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)

Sensorless control of switched reluctance motor based on a simple flux linkage model
von: Fan, J., et al.
Veröffentlicht: (2023)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

General theoretical solution of sensorless speed-flux vector control of induction motor
von: S. M. Peresada, et al.
Veröffentlicht: (2016)

Sensorless speed control of the direct current motors
von: S. Peresada, et al.
Veröffentlicht: (2021)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
von: Bondar, R. P.
Veröffentlicht: (2014)

PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
von: Chumak , V., et al.
Veröffentlicht: (2025)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2016)

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control
von: Abed, K., et al.
Veröffentlicht: (2024)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

Dynamic properties of the sensorless vector control system of induction motor drive of electric vehicle
von: B. I. Pryimak, et al.
Veröffentlicht: (2018)

Analysis of suitable converter for the implementation of drive system in solar photovoltaic panels
von: Themozhi, G., et al.
Veröffentlicht: (2024)

A new stator flow-oriented control method based on type-2 fuzzy logic controllers for permanent magnet synchronous motors
von: Tabbakh, M., et al.
Veröffentlicht: (2026)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Performance evaluation and analysis by simulation for sliding mode control with speed regulation of permanent magnet synchronous motor drives in electric vehicles
von: Senani, F., et al.
Veröffentlicht: (2025)

A truck’s starter motor with a nonsalient-pole stator
von: Lushchik, V. D., et al.
Veröffentlicht: (2012)

Adaptive deep reinforcement learning-based control strategy for high-performance permanent magnet synchronous motor drive systems
von: Dukkipati, S., et al.
Veröffentlicht: (2026)

STABILITY AND ACCURACY OF THE ROBUST SYSTEM FOR STABILIZING THE ROTOR FLUX-LINKAGE OF AN ASYNCHRONOUS ELECTRIC DRIVE AT RANDOM VARIATIONS OF THE UNCERTAIN PARAMETERS WITHIN THE SPECIFIED BOUNDARIES
von: Khlopenko, I. N., et al.
Veröffentlicht: (2018)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

Development and study of a microprocessor automatic control system for a mono-switch tie type with a linear inductive electric motor and a discrete speed controller
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2022)

PHASE METHOD OF DETECTING BREAKS IN STATOR WINDINGS OF ASYNCHRONOUS MOTORS
von: Yenikieiev, Olexander, et al.
Veröffentlicht: (2024)

STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
von: Khlopenko, N. J., et al.
Veröffentlicht: (2017)

Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

Control of sensorless d.c drives of welding machines
von: Ju. N. Lankin, et al.
Veröffentlicht: (2010)

Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
von: Laamari, Y., et al.
Veröffentlicht: (2025)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
von: Khlopenko, N. J.
Veröffentlicht: (2020)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

Flux observer adaptive to induction motors active rotor resistance variations
von: S. M. Peresada, et al.
Veröffentlicht: (2022)

Estimation of the main dimensions of the traction permanent magnet-assisted synchronous reluctance motor
von: Liubarskyi, B. G., et al.
Veröffentlicht: (2021)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Speeds and torques relations of the two-motor electric drive with gearless electromechanical differential
von: V. P. Stiazhkin, et al.
Veröffentlicht: (2018)

Invariance of rotor flux observers in direct field-oriented control of induction motors
von: S. M. Peresada, et al.
Veröffentlicht: (2014)

Sensorless control of switched reluctance motors of traction electromechanical systems
von: O. M. Sinchuk, et al.
Veröffentlicht: (2017)