Performance improvement of parallel dual-star permanent magnet synchronous machines via type-2 fuzzy direct torque control with a single six-phase inverter

Introduction. The growing need for efficient and high-performance electric drive systems has led to increased research in advanced control strategies for multi-machine configurations. Among them, dual-star permanent magnet synchronous machines (DSPMSMs) connected in parallel to a single inverter off...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2026
Hauptverfasser:	Bounab, A., Chaiba, A., Belkacem, S., Chariete, A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2026
Schlagworte:	permanent magnet synchronous machine type-2 fuzzy logic controller direct torque control six-phase inverter multi-machines system
Online Zugang:	http://eie.khpi.edu.ua/article/view/332661
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

PERFORMANCE ANALYSIS OF SIX-PHASE INDUCTION MACHINE-MULTILEVEL INVERTER WITH ARBITRARY DISPLACEMENT
von: Ben Slimene, Marwa
Veröffentlicht: (2020)

Direct torque control based on second order sliding mode controller for three-level inverter-fed permanent magnet synchronous motor: comparative study
von: Guezi, A., et al.
Veröffentlicht: (2022)

Inverter fuzzy speed control of multi-machine system series-connected fed by a single five-phase an asymmetrical 19-level inverter with less number of switches
von: Bessaad, T., et al.
Veröffentlicht: (2025)

Fault-tolerant control of a double star induction machine operating in active redundancy
von: Guizani, S., et al.
Veröffentlicht: (2025)

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
von: Nayli, A., et al.
Veröffentlicht: (2026)

COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
von: Prakht, V. A., et al.
Veröffentlicht: (2020)

Improve of the direct torque control strategy applied to a multi-phase interior permanent magnet synchronous motor using a super twisting sliding mode algorithm
von: Mehedi, F., et al.
Veröffentlicht: (2025)

Influence of permanent magnet parameters on the performances of claw pole machines used in hybrid vehicles
von: Kimouche, A., et al.
Veröffentlicht: (2024)

Performance enhancement of direct torque control induction motor drive using space vector modulation strategy
von: Moussaoui, L.
Veröffentlicht: (2022)

Field programmable gate array hardware in the loop validation of fuzzy direct torque control for induction machine drive
von: Aib, A., et al.
Veröffentlicht: (2023)

Frequency analysis of stator currents of an induction motor controlled by direct torque control associated with a fuzzy flux estimator
von: Mabrouk, Y. A., et al.
Veröffentlicht: (2023)

Fault tolerant control of a permanent magnet synchronous machine using multiple constraints Takagi-Sugeno approach
von: Moussaoui, L., et al.
Veröffentlicht: (2022)

Implementation of a new flux rotor based on model reference adaptive system for sensorless direct torque control modified for induction motor
von: Saifi, R.
Veröffentlicht: (2023)

Impact of fractional filter in PI control loop applied to induction motor speed drive
von: Hassainia, S., et al.
Veröffentlicht: (2022)

A robust control design approach for altitude control and trajectory tracking of a quadrotor
von: Gulshan, Z. A., et al.
Veröffentlicht: (2021)

Model reference adaptive system speed estimator based on type-1 and type-2 fuzzy logic sensorless control of electrical vehicle with electrical differential
von: Khemis, A., et al.
Veröffentlicht: (2023)

Enhancing power system security using soft computing and machine learning
von: Venkatesh, P., et al.
Veröffentlicht: (2023)

ELECTROMAGNETIC CALCULATION OF THREE-PHASE ASYNCHRONOUS MOTORS WITH A SIX-PHASE WINDING
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)

Optimization of cogging torque in interior permanent magnet synchronous motor using optimum magnet v-angle
von: Patel, A. N., et al.
Veröffentlicht: (2023)

Reduction of cogging torque of radial flux permanent magnet brushless DC motor by magnet shifting technique
von: Panchal, T. H., et al.
Veröffentlicht: (2022)

PERMANENT MAGNETS: IT’S APPLICATION IN ELECTROTECHNICAL INDUSTRY AND WASTE TREATMENT FROM MINING AND OTHER ENTERPRISES
von: Permynov, Y., et al.
Veröffentlicht: (2018)

A 2-pole winding development technique for asynchronous machines with increased number of parallel branches
von: Lushchik, V. D., et al.
Veröffentlicht: (2014)

Indirect adaptive fuzzy finite time synergetic control for power systems
von: Khatir, A., et al.
Veröffentlicht: (2023)

DIVERGENCE OF THERMAL FACTORS OF TRACTION MACHINE ARMATURE WINDINGS UNDER HEAT TEST VIA BACK-TO-BACK METHOD
von: Afanasov, A. M.
Veröffentlicht: (2012)

THE STABILITY MONITORING OF THE MANUFACTURING PROCESS OF ELECTRICAL INSULATING SYSTEMS OF TRACTION ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2017)

A COMPARATIVE ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT UNDER ACTIVE-INDUCTIVE LOADING
von: Vasyliv, K. M.
Veröffentlicht: (2013)

Ensuring service continuity in electric vehicles with vector control and linear quadratic regulator for dual star induction motors
von: Darsouni, Z., et al.
Veröffentlicht: (2025)

Fuzzy logic-based vector control of permanent magnet synchronous motor drives under inter-turn short-circuit fault conditions
von: Laamari, Y., et al.
Veröffentlicht: (2025)

ІНКРЕМЕНТНИЙ ЦИФРОВИЙ КВАЗІІДЕАЛ ІНТЕГРАТОР ЗАЯВКИ ПОПЕРЕДНЬОГО ПОТОКУ ОЦІНКИ КЕРУЮЧОЇ ІНДУКЦІЙНОЇ МАШИНИ
von: Ustun, O., et al.
Veröffentlicht: (2008)

IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
von: Pliugin, V. E., et al.
Veröffentlicht: (2019)

New design and comparative study via two techniques for wind energy conversion system
von: Mahgoun, M. S., et al.
Veröffentlicht: (2021)

Optimization of fractional PI controller parameters for enhanced induction motor speed control via indirect field-oriented control
von: Alnaib, I. I., et al.
Veröffentlicht: (2025)

PROSPECTS FOR THE USE OF LIMITED-ANGLE TORQUE MOTORS IN RENEWABLE ENERGY SYSTEMS
von: Chumak , V., et al.
Veröffentlicht: (2025)

New application of artificial neural network-based direct power control for permanent magnet synchronous generator
von: Akkouchi, K., et al.
Veröffentlicht: (2021)

MACHINE-TRANSFORMER UNITS FOR WIND TURBINES
von: Panchenko, V. I., et al.
Veröffentlicht: (2016)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)

Yield prediction at field level
von: Kryvoshein, Oleksandr, et al.
Veröffentlicht: (2024)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)