Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
Introduction. The paper is devoted to improving the designs of three-phase induction motors (TIMs) based on the application of numerical calculations of their magnetic fields. Considering that the classical system for designing TIMs does not always provide sufficient accuracy of their design paramet...
Gespeichert in:
| Datum: | 2026 |
|---|---|
| 1. Verfasser: | Milykh, V. I. |
| Format: | Artikel |
| Sprache: | Englisch Ukrainisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2026
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/347595 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025)
von: Milykh, V. I.
Veröffentlicht: (2025)
A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016)
von: Milykh, V. I.
Veröffentlicht: (2016)
AUTOMATED CALCULATIONS OF THE DYNAMICS OF TURBOGENERATOR ELECTROMAGNETIC PROCESSES IN SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015)
von: Milykh, V. I., et al.
Veröffentlicht: (2015)
Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023)
von: Milykh, V. I.
Veröffentlicht: (2023)
DETERMINATION OF ELECTROMAGNETIC PARAMETERS AND PHASE RELATIONS IN TURBO-GENERATORS BY THE AUTOMATED CALCULATION OF THE MAGNETIC FIELD IN THE SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2016)
von: Milykh, V. I., et al.
Veröffentlicht: (2016)
DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)
NUMERICAL-FIELD ANALYSIS OF THE CHARACTERISTICS OF A THREE-PHASE MAGNETIC FIELD INDUCTOR FOR THE TREATMENT OF VARIOUS SUBSTANCES WITH CURRENT STABILIZATION
von: Milykh, V. I., et al.
Veröffentlicht: (2019)
von: Milykh, V. I., et al.
Veröffentlicht: (2019)
About geological theory
von: Gordienko, V.V.
Veröffentlicht: (2022)
von: Gordienko, V.V.
Veröffentlicht: (2022)
ELECTROMAGNETIC CALCULATION OF THREE-PHASE ASYNCHRONOUS MOTORS WITH A SIX-PHASE WINDING
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)
von: Lushchik, V. D., et al.
Veröffentlicht: (2013)
DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)
AUTOMATED FORMATION OF CALCULATION MODELS OF TURBOGENERATORS FOR SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015)
von: Milykh, V. I., et al.
Veröffentlicht: (2015)
THE NUMERICAL-FIELD ANALYSIS OF THE MAGNETIC FIELD AND THE ELECTRICAL QUANTITIES IN THE TURBOGENERATOR STATOR UNDER AUTONOMOUS UNBALANCED LOADING
von: Milykh, V. I.
Veröffentlicht: (2016)
von: Milykh, V. I.
Veröffentlicht: (2016)
ANALYSIS OF THE VARIABLE COMPONENT OF MAGNETIC FIELD ON THE ROTATING ROTOR SURFACE OF A TURBOGENERATOR.
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
ON THE URGENCY OF IMPROVEMENT FOR THE SCIENTIFIC TERMINOLOGY IN HYDROGEOLOGY
von: SITNIKOV, А.В.
Veröffentlicht: (2012)
von: SITNIKOV, А.В.
Veröffentlicht: (2012)
Software system for automated data interpretation of potential fields (GMT-Auto)
von: Starostenko, V. I., et al.
Veröffentlicht: (2015)
von: Starostenko, V. I., et al.
Veröffentlicht: (2015)
Quality analysis of information control systems of oil refining industries Justification of the need to implement information management systems of enterprises of the oil refining industry
von: Охріменко, Т. О., et al.
Veröffentlicht: (2021)
von: Охріменко, Т. О., et al.
Veröffentlicht: (2021)
Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)
Use of Refined Finite Element Models for Solving the Contact Thermoalasticity Problem of Gas Turbine Rotors
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)
von: Morgun, Sergey A., et al.
Veröffentlicht: (2018)
Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
von: Morhun, Serhii O.
Veröffentlicht: (2019)
von: Morhun, Serhii O.
Veröffentlicht: (2019)
Numerical Analysis of Working Processes in the Blade Channels of the Highly-Loaded Turbine of a Marine Gas Turbine Engine, Using a Refined Finite Element Model
von: Morhun, Serhii O.
Veröffentlicht: (2019)
von: Morhun, Serhii O.
Veröffentlicht: (2019)
CHARACTERISTICS OF A CYLINDRICAL INDUCTOR OF A ROTATING MAGNETIC FIELD FOR TECHNOLOGICAL PURPOSES WHEN IT IS POWERED FROM THE MAINS AT A GIVEN VOLTAGE
von: Milykh, V. I., et al.
Veröffentlicht: (2020)
von: Milykh, V. I., et al.
Veröffentlicht: (2020)
THEORETICAL AND HARMONIC ANALYSIS OF MAGNETIC FIELDS IN THE ACTIVE ZONE OF A TURBOGENERATOR UNDER LOAD CONDITIONS
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
Nonlinear vector control of multiphase induction motor using linear quadratic regulator and active disturbances rejection control under disturbances and parameter variations
von: Rezgui, S. E., et al.
Veröffentlicht: (2025)
von: Rezgui, S. E., et al.
Veröffentlicht: (2025)
Automated control systems microclimate facilities, monitoring and audit within oil fields influence
von: Radlovska, Katerina O.
Veröffentlicht: (2024)
von: Radlovska, Katerina O.
Veröffentlicht: (2024)
A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)
A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)
NUMERICAL COMPUTATION OF ELECTRIC FIELDS IN PRESENCE OF CURVILINEAR INTERFACE BETWEEN CONDUCTIVE AND NON-CONDUCTIVE MEDIA
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
COLONIAL PICOFOSSIL'S OF PRECAMBRIAN HYME-NOPHACOIDES ROBLOT 1964: STAGES OF THEIR REPLICATION AS THE BASIC ARGUMENT OF THEIR BIOGENIC VERIFICATION
von: LOPUKHIN, A. S., et al.
Veröffentlicht: (2011)
von: LOPUKHIN, A. S., et al.
Veröffentlicht: (2011)
Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)
von: Petrushin, V. S.
Veröffentlicht: (2014)
Penetration of non-uniform electromagnetic field into conducting body
von: Vasetsky, Yu. M.
Veröffentlicht: (2021)
von: Vasetsky, Yu. M.
Veröffentlicht: (2021)
Refined calculation of energy modes of a frequency-regulated induction motor
von: Volkov, V. A., et al.
Veröffentlicht: (2024)
von: Volkov, V. A., et al.
Veröffentlicht: (2024)
Geotechnical monitoring during reconstruction of the Poshtova Square in Kyiv
von: Ischenko, Yurii
Veröffentlicht: (2020)
von: Ischenko, Yurii
Veröffentlicht: (2020)
Automated system for calgulating corrective loads and predicting vibration during dynamic balancing of turbines
von: Trykush, N. P., et al.
Veröffentlicht: (2018)
von: Trykush, N. P., et al.
Veröffentlicht: (2018)
Analysis of three-phase power transformer laminated magnetic core designs
von: Levin, M. I., et al.
Veröffentlicht: (2014)
von: Levin, M. I., et al.
Veröffentlicht: (2014)
NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
von: Milykh, V. I., et al.
Veröffentlicht: (2014)
von: Milykh, V. I., et al.
Veröffentlicht: (2014)
From the idea to the creation of an automated interpretation system of potential fields GMT-AUTO: step by step
von: Makarenko, I.B., et al.
Veröffentlicht: (2025)
von: Makarenko, I.B., et al.
Veröffentlicht: (2025)
A METHOD OF COMPLEX AUTOMATED MONITORING OF UKRAINIAN POWER ENERGY SYSTEM OBJECTS TO INCREASE ITS OPERATION SAFETY
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
STUDY OF THE MAGNETIC FIELD OF THREE PHASE LINES OF SINGLE CORE POWER CABLES WITH TWO-END BONDING OF THEIR SHIELDS
von: Rozov, V. Yu., et al.
Veröffentlicht: (2015)
von: Rozov, V. Yu., et al.
Veröffentlicht: (2015)
Some aspects of practical applications of speckles (Review)
von: Shylo, S. A.
Veröffentlicht: (2019)
von: Shylo, S. A.
Veröffentlicht: (2019)
Modeling of regional magnetic field applying spherical functions: practical aspect
von: Sumaruk, Yu. P., et al.
Veröffentlicht: (2019)
von: Sumaruk, Yu. P., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
Numerical-field analysis of differential leakage reactance of stator winding in three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2025) -
A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016) -
AUTOMATED CALCULATIONS OF THE DYNAMICS OF TURBOGENERATOR ELECTROMAGNETIC PROCESSES IN SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015) -
Numerical-field analysis of active and reactive winding parameters and mechanical characteristics of a squirrel-cage induction motor
von: Milykh, V. I.
Veröffentlicht: (2023) -
DETERMINATION OF ELECTROMAGNETIC PARAMETERS AND PHASE RELATIONS IN TURBO-GENERATORS BY THE AUTOMATED CALCULATION OF THE MAGNETIC FIELD IN THE SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2016)