Buchumschlag

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS

Purpose. To find the analytical expressions of determining the optimum geometric dimensions by criteria of the weight minimum and the cost minimum of axial field squirrel-cage induction motors and to compare traditional and axial field motors. Methodology. We have applied the adapted method of the r...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	Stavinskii, A. A., Palchykov, O. O.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2015
Schlagworte:	indications of the technical level optimum geometric dimensions traditional and axial field motors 621.313.333
Online Zugang:	https://eie.khpi.edu.ua/article/view/2074-272X.2015.3.03
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Ähnliche Einträge

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2014)

OBJECTIVE FUNCTIONS OF THE COMPARATIVE ANALYSIS OF THE ENERGY EFFICIENCY OF ELECTROMAGNETIC SYSTEMS OF INDUCTION MOTORS WITH INNER AND OUTER ROTORS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Optimization of loading modes of a controlled asynchronous electric drive
von: Kanov, L. N.
Veröffentlicht: (2013)

Energy-efficient induction motors designing with application of a modified criterion of reduced costs
von: Petrushin, V. S.
Veröffentlicht: (2014)

ANALYSIS OF A THYRISTOR VOLTAGE CONVERTER FED INDUCTION MOTOR START
von: Petrushin, V. S., et al.
Veröffentlicht: (2012)

MOTORSOLVE SOFTWARE PACKAGE: VERIFICATION OF PARAMETERS AND CHARACTERISTICS OF THE BRUSHLESS PERMANENT MAGNET MOTOR
von: Rymsha, V. V., et al.
Veröffentlicht: (2019)

RESEARCH OF DYNAMIC CHARACTERISTICS OF INDUCTION MOTORS IN ELECTRIC DRIVES WITH MATCHING TRANSFORMER AND REDUCER
von: Petrushin, V. S., et al.
Veröffentlicht: (2019)

A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
von: Vasyliv, K. M.
Veröffentlicht: (2017)

REVERSIBLE THYRISTOR CONVERTERS OF BRUSHLESS SYNCHRONOUS COMPENSATERS
von: Galinovskiy, A. M., et al.
Veröffentlicht: (2013)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

REACTIVE CURRENT OF AN INDUCTION ELECTRIC DRIVES WITH THYRISTOR VOLTAGE REGULATOR
von: Kovalova, J. V.
Veröffentlicht: (2014)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

ANALYSIS OF ELECTRICITY CONSUMPTION OF INDUCTION MOTORS OF IE1 AND IE2 EFFICIENCY CLASSES IN A 11 kW PUMP INSTALLATION
von: Oshurbekov, S. Kh., et al.
Veröffentlicht: (2020)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

The magnetic forces in the air-gap of the axial arc-stator induction motor with disc rotor
von: O. M. Karlov, et al.
Veröffentlicht: (2016)

REGULARITIES OF ELECTROMAGNETIC PROCESSES OF A CONTACTLESS EXCITATION SYSTEM OF AN ASYNCHRONIZED GENERATOR BASED ON A CASCADE THREE-PHASE-THREE-PHASE VOLTAGE MODULATOR IN A SINGLE-STAR CIRCUIT
von: Vasyliv, K. M.
Veröffentlicht: (2018)

METHOD OF DETERMINING THE START TIME OF INDUCTION MOTORS IN THE CONTROL OF RESISTOR-THYRISTOR MODULES
von: Lobov, V. I., et al.
Veröffentlicht: (2015)

RESEARCH INTO VALVE-ENGINE TRANSDUCERS OF BRUSHLESS SYNCHRONOUS AND ASYNCHRONIZED MACHINES IN A CIRCUIT SIMULATION SYSTEM.
von: Galinovskiy, A. M.
Veröffentlicht: (2013)

COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
von: Petrushin, V. S., et al.
Veröffentlicht: (2016)

INTENSITY SETTER FOR A DEVICE OF SMOOTH START OF SUBMERSIBLE PUMP ELECTRIC MOTOR
von: Lobov, V. I., et al.
Veröffentlicht: (2016)

Prospects of Using Hydrogen Microaddition to Improve Diesel Engine Ecological Indicators
von: Avramenko, A.M., et al.
Veröffentlicht: (2019)

Modeling Heat and Mass Exchange Processes in Metal-hydride Installations
von: Chorna, N.A., et al.
Veröffentlicht: (2018)

Calculated Evaluation of the Thermal Physical Properties of Nitrogen as a Working Fluid of Cryogenic Piston Engines. Heat Conductivity Calculation
von: Levterov, A.M., et al.
Veröffentlicht: (2019)

Basic Operation Principles and Control Algorithm for a High-pressure Membrane-less Electrolyser
von: Solovei, V.V., et al.
Veröffentlicht: (2018)

Numerical Simulation of Metal Hydride Battery Heat Conducting Matrix Heat-stressed and Deformed State
von: Avramenko, A.N., et al.
Veröffentlicht: (2018)

DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)

Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)

Estimation of cost indicators for the task of electrical power system development forecast under the market liberalization conditions
von: Shulzhenko S.V.
Veröffentlicht: (2008)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)

ANALYSIS OF PROCESSES IN AN INDEPENDENT GENERATOR WITH A NONCONTACT CASCADE THREE-PHASE MODULATED EXCITER VIA A STAR-CONNECTED CIRCUIT WITH A COMMON MODULATOR PHASE CONNECTION UNDER OPERATION TO AN INDUCTION MOTORS SITE
von: Vasyliv, K. M.
Veröffentlicht: (2013)

The Magnetic Field in the Gap of the Axial Arc-stator Induction Motor with the Parallel Connection of Windings Opposing Stators
von: R. S. Krishchuk
Veröffentlicht: (2016)

SIMULATION OF MAGNETIC INDUCTION DISTRIBUTION IN A COAXIAL LINEAR MOTOR WITH AXIAL AND RADIAL DIRECTION OF PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

MODELING OF OPERATION OF COAXIAL-LINEAR MOTORS WITH AXIAL AND RADIAL DIRECTIONS OF MAGNETIZATION OF PERMANENT MAGNETS IN DYNAMIC MODE
von: Golenkov, G. M., et al.
Veröffentlicht: (2014)

AIRGAP MAGNETIC INDUCTION DISTRIBUTION IN A COAXIALLY-LINEAR SYNCHRONOUS MOTOR WITH AXIAL AND RADIAL DIRECTION OF THE RUNNER PERMANENT MAGNETS MAGNETIZATION
von: Golenkov, G. M., et al.
Veröffentlicht: (2013)

DETERMINING THE INTENSITY OF A POINT-LIKE SOURCE OBSERVED ON THE BACKGROUND OF AN EXTENDED SOURCE
von: Kornienko, Y. V., et al.
Veröffentlicht: (2015)

MAGNETIC FIELD IN A GAP OF ELECTROMECHANICAL DISINTEGRATORS
von: Lushchik, V. D.
Veröffentlicht: (2014)