Cover Image

STUDY OF THE MAGNETIC FIELD OF THREE PHASE LINES OF SINGLE CORE POWER CABLES WITH TWO-END BONDING OF THEIR SHIELDS

The study tested the process of the magnetic field (MF) mitigation in the HV three-phase power cable lines (CL) made of single core cables in two-ends bonding of their shields. Developed the technique of numerical simulation and calculation of the MF of CL based on its axisymmetric calculation model...

Full description

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	Rozov, V. Yu., Kvytsynskyi, A. A., Dobrodeyev, P. N., Grinchenko, V. S., Erisov, A. V., Tkachenko, A. O.
Format:	Article
Language:	Russian
Published:	National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine 2015
Subjects:	magnetic field three-phase cable power lines two-ends bonding of shields 621.315.2 537.811
Online Access:	http://eie.khpi.edu.ua/article/view/2074-272X.2015.4.11
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Electrical Engineering & Electromechanics

Institution

Electrical Engineering & Electromechanics

Similar Items

DETERMINATION OF ANALYTICAL CALCULATION ERROR OF MAGNETIC FIELD OF HIGH-VOLTAGE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS CAUSED BY NON-UNIFORM CURRENT DISTRIBUTION IN THE SHIELDS
by: Tkachenko, A. O.
Published: (2017)

CALCULATION OF MAGNETIC FIELD OF THREE-PHASE CABLE LINES WITH TWO-POINT BONDED CABLE SHIELDS COVERED BY FERROMAGNETIC CORES
by: Rozov, V. Yu., et al.
Published: (2017)

IMPROVING CALCULATION ACCURACY OF CURRENTS IN CABLE SHIELDS AT DOUBLE-SIDED GROUNDING OF THREE-PHASE CABLE LINE
by: Grinchenko, V. S., et al.
Published: (2017)

EXPERIMENTAL DETERMINATION OF LONGITUDINAL COMPONENT OF MAGNETIC FLUX IN FERROMAGNETIC WIRE OF SINGLE-CORE POWER CABLE ARMOUR
by: Kostiukov, I. A.
Published: (2014)

HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
by: Antonets, T. Yu., et al.
Published: (2015)

PROBLEMS OF ECONOMIC CRITERIA APPLICATION TO CALCULATION AND DESIGN OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLES
by: Golik, O. V.
Published: (2013)

INVESTIGATION OF LOSSES IN INSULATION OF HIGH-VOLTAGE POWER CABLES WITH XLPE INSULATION
by: Shchebeniuk, L. A., et al.
Published: (2016)

DYNAMICS OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLE HEATING
by: Zolotaryov, V. M., et al.
Published: (2013)

OVERLOAD CAPABILITY OF POWER CABLES IN ACTUAL POWER CONSUMPTION SYSTEMS
by: Shchebeniuk, L. A.
Published: (2013)

TECHNOLOGICAL MONITORING OF ELECTRICAL RESISTANCE OF PRESSED CABLE CONDUCTORS IN PRODUCTION CONDITIONS
by: Antonets, Y. A., et al.
Published: (2019)

GENERAL QUESTIONS AS TO PROVIDING ELECTROMAGNETIC COMPATIBILITY OF POWER CABLE LINES, THEIR AMPERAGE CAPACITY AND TYPES OF SHIELD CONSTRUCTION
by: Kostiukov, I. A.
Published: (2013)

EFFICIENT SHIELDING OF THREE-PHASE CABLE LINE MAGNETIC FIELD BY PASSIVE LOOP UNDER LIMITED THERMAL EFFECT ON POWER CABLES
by: Rozov, V. Yu., et al.
Published: (2019)

AN ELECTRICAL SYSTEM FOR TESTING CROSS-LINKED POLYETHYLENE POWER CABLES OF ALL VOLTAGE CLASSES
by: Karpushenko, V. P., et al.
Published: (2013)

INCREASING NOISE IMMUNITY OF CABLES FOR FIRE PROTECTION SYSTEMS
by: Bezprozvannych, G. V., et al.
Published: (2020)

RESEARCH AND DEVELOPMENT OF STATE-OF-THE-ART WORLD-CLASS CABLES AND WIRES IN "YUZHCABLE" WORKS PUBLIC COMPANY
by: Zolotaryov, V. M., et al.
Published: (2013)

A calculation model for determination of impedance of power high voltage single-core cables with polymer insulation
by: Bezprozvannych, G. V., et al.
Published: (2021)

STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
by: Golik, O. V.
Published: (2016)

PLANT «YUZHCABLE WORKS»: MILESTONES OF THE ROAD (75 YEARS TO PLANT «YUZHCABLE WORKS»)
by: Zolotaryov, V. M.
Published: (2018)

EXPERIMENTAL RESEARCH ON DIELECTRIC STRENGTH OF PEEIDH-0.63 WIRE
by: Gurin, A. G., et al.
Published: (2013)

ONLINE TECHNOLOGICAL MONITORING OF INSULATION DEFECTS IN ENAMELED WIRES
by: Zolotaryov, V. M., et al.
Published: (2017)

3D-MODELING FOR DETERMINATION OF AXIAL FORCES ACTING IN ELEMENTS OF THE END ZONE OF POWER TURBOGENERATORS
by: Gaydenko, Y. A., et al.
Published: (2013)

A CHOICE OF ACCEPTABLE SECTIONS OF ELECTRIC WIRES AND CABLES IN ON-BOARD CIRCUITS OF AIRCRAFT ELECTRICAL EQUIPMENT
by: Baranov, M. I.
Published: (2020)

THE SEVENTY YEARS’ HISTORY OF "YUZHCABLE" WORKS
by: Zolotaryov, V. M.
Published: (2013)

STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION
by: Golik, O. V., et al.
Published: (2017)

A STATISTICAL MODEL OF MONITORING OF INSULATION BREAKDOWN VOLTAGE STABILITY IN THE PROCESS OF ENAMELED WIRES PRODUCTION
by: Gurin, A. G., et al.
Published: (2019)

A CHOICE OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN POWER CIRCUITS OF ELECTRICAL EQUIPMENT OF POWER INDUSTRY
by: Baranov, M. I.
Published: (2019)

A CHOICE OF SECTIONS OF ELECTRIC WIRES AND CABLES IN CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT IMPULSE TECHNIQUE
by: Baranov, M. I.
Published: (2018)

Requirements for cables as categories of construction products and thermal resistance of power cables
by: Bezprozvannych, G. V., et al.
Published: (2024)

Розподілена оптоелектронна система екологічного моніторингу в режимі реального часу
by: КОЖЕМ'ЯКО, АНДРІЙ ВІКТОРОВИЧ, et al.
Published: (2017)

Modeling and analysis of electro-thermal processes in installations for induction heat treatment of aluminum cores of power cables
by: Shcherba, A. A., et al.
Published: (2024)

CALCULATION AND EXPERIMENTAL DETERMINATION OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN THE CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT PULSE TECHNIQUE
by: Baranov, M. I.
Published: (2019)

Development of methods for adapting the parameters of spatial end winding sections in 2D circuit-field models of induction-synchronous electric machines
by: Kotsur, M. I.
Published: (2024)

Association smooth-pole dual open-end windings permanent magnet synchronous machine with cascaded 2-level inverters for improved performances
by: Nayli, A., et al.
Published: (2026)

REFINED SELECTION OF ALLOWABLE CROSS-SECTIONS OF ELECTRICAL CONDUCTORS AND CABLES IN THE POWER CIRCUITS OF INDUSTRIAL ELECTRICAL EQUIPMENT TAKING INTO ACCOUNT EMERGENCY OPERATING MODES
by: Baranov, M. I.
Published: (2019)

Magnetic field of electrical heating cable systems of the floors for residential premises
by: Rozov, V. Yu., et al.
Published: (2024)

ELECTROMECHANICAL TRANSIENT PROCESSES DURING SUPPLY VOLTAGE CHANGING IN THE SYSTEM OF POLYMER INSULATION COVERING OF THE CURRENT-CARRYING CORE OF ULTRA HIGH VOLTAGE CABLES
by: Zolotaryov, V. M., et al.
Published: (2018)

Steady-state harmonic oscillations of a layer weakened by two openings with end faces covered by diaphragm (a symmetric case)
by: Ковалев, Ю. Д., et al.
Published: (2018)

Steady-state harmonic oscillations of a layer weakened by two openings with end faces covered by diaphragm (a symmetric case)
by: Ковалев, Ю. Д., et al.
Published: (2018)

Destruction of polymer insulation and threshold amplitudes of current pulses of different temporal shapes for electric wires and cables in the low- and high-current circuits of pulse power engineering, electrical engineering and electronic devices
by: Baranov, M.I., et al.
Published: (2021)

ELECTROMAGNETIC FIELD OF A CABLE WITH A TWO-LAYER SHIELD
by: Boev, V. M.
Published: (2014)