AUTOMATED CALCULATIONS OF THE DYNAMICS OF TURBOGENERATOR ELECTROMAGNETIC PROCESSES IN SOFTWARE ENVIRONMENT FEMM
Attention is paid to the popular FEMM (Finite Element Method Magnetics) program which is effective in the numerical calculations of the magnetic fields of electrical machines. The principles of the automated calculations providing the analysis of the dynamics of electromagnetic processes in turbo-ge...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | Milykh, V. I., Polyakova, N. V. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
National Technical University "Kharkiv Polytechnic Institute" and Аnatolii Pidhornyi Institute of Power Machines and Systems of NAS of Ukraine
2015
|
| Schlagworte: | |
| Online Zugang: | http://eie.khpi.edu.ua/article/view/2074-272X.2015.6.04 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Electrical Engineering & Electromechanics |
Institution
Electrical Engineering & ElectromechanicsÄhnliche Einträge
AUTOMATED FORMATION OF CALCULATION MODELS OF TURBOGENERATORS FOR SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015)
von: Milykh, V. I., et al.
Veröffentlicht: (2015)
DETERMINATION OF ELECTROMAGNETIC PARAMETERS AND PHASE RELATIONS IN TURBO-GENERATORS BY THE AUTOMATED CALCULATION OF THE MAGNETIC FIELD IN THE SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2016)
von: Milykh, V. I., et al.
Veröffentlicht: (2016)
A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016)
von: Milykh, V. I.
Veröffentlicht: (2016)
ANALYSIS OF THE VARIABLE COMPONENT OF MAGNETIC FIELD ON THE ROTATING ROTOR SURFACE OF A TURBOGENERATOR.
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
СИСТЕМА АВТОМАТИЗОВАНОГО ФОРМУВАННЯ РОЗРАХУНКОВИХ МОДЕЛЕЙ ЕЛЕКТРИЧНИХ МАШИН ДЛЯ ПРОГРАМНОГО СЕРЕДОВИЩА FEMM
von: Мілих, В.І.
Veröffentlicht: (2022)
von: Мілих, В.І.
Veröffentlicht: (2022)
THEORETICAL AND HARMONIC ANALYSIS OF MAGNETIC FIELDS IN THE ACTIVE ZONE OF A TURBOGENERATOR UNDER LOAD CONDITIONS
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
von: Milykh, V. I., et al.
Veröffentlicht: (2013)
Algorithmization of the decision of magneto-elasticity thin bodies problems with the help of the R-functions method
von: Назиров, Ш. А., et al.
Veröffentlicht: (2016)
von: Назиров, Ш. А., et al.
Veröffentlicht: (2016)
Algorithmization of the decision of magneto-elasticity thin bodies problems with the help of the R-functions method
von: Назиров, Ш. А., et al.
Veröffentlicht: (2016)
von: Назиров, Ш. А., et al.
Veröffentlicht: (2016)
Theory and practice of numerical-field analysis and refinement of electromagnetic and energy parameters in the designs of three-phase induction motors
von: Milykh, V. I.
Veröffentlicht: (2026)
von: Milykh, V. I.
Veröffentlicht: (2026)
NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
von: Milykh, V. I., et al.
Veröffentlicht: (2014)
von: Milykh, V. I., et al.
Veröffentlicht: (2014)
THE NUMERICAL-FIELD ANALYSIS OF THE MAGNETIC FIELD AND THE ELECTRICAL QUANTITIES IN THE TURBOGENERATOR STATOR UNDER AUTONOMOUS UNBALANCED LOADING
von: Milykh, V. I.
Veröffentlicht: (2016)
von: Milykh, V. I.
Veröffentlicht: (2016)
Software system for automated data interpretation of potential fields (GMT-Auto)
von: Starostenko, V. I., et al.
Veröffentlicht: (2015)
von: Starostenko, V. I., et al.
Veröffentlicht: (2015)
Automated system for calgulating corrective loads and predicting vibration during dynamic balancing of turbines
von: Trykush, N. P., et al.
Veröffentlicht: (2018)
von: Trykush, N. P., et al.
Veröffentlicht: (2018)
A METHOD OF REDUCING THE ERROR IN DETERMINING THE ANGULAR DISPLACEMENTS WHEN USING INDUCTIVE SENSORS
von: Snitkov, K. I., et al.
Veröffentlicht: (2020)
von: Snitkov, K. I., et al.
Veröffentlicht: (2020)
ELECTROMAGNETIC VIBRATION DISTURBING FORCES AT THE ECCENTRICITY OF ROTOR OF TURBOGENERATOR
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2016)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2016)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)
von: Кобзарь, К. А., et al.
Veröffentlicht: (2015)
ANALYSIS OF ELECTROMAGNETIC VIBRATION FORCES IN THE ELEMENTS OF THE TURBOGENERATOR STATOR FASTENING TO THE CASE IN NON-NOMINAL OPERATION MODES
von: Shevchenko, V. V., et al.
Veröffentlicht: (2018)
von: Shevchenko, V. V., et al.
Veröffentlicht: (2018)
Jupyter Notebook: a system for interactive scientific computing
von: Yakimchik, A. I.
Veröffentlicht: (2019)
von: Yakimchik, A. I.
Veröffentlicht: (2019)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
AN ARMATURE WINDING PARAMETER CALCULATION TECHNIQUE FOR AN AUTOMOTIVE COMPOSITELY EXCITED GENERATOR
von: Petrenko, A. N.
Veröffentlicht: (2014)
von: Petrenko, A. N.
Veröffentlicht: (2014)
Automation of standardized cyber insurance processes
von: Khudyntsev, Mykola, et al.
Veröffentlicht: (2025)
von: Khudyntsev, Mykola, et al.
Veröffentlicht: (2025)
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)
von: Овсянникова, Е. А.
Veröffentlicht: (2017)
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
von: Овсянникова, Е. А.
Veröffentlicht: (2017)
von: Овсянникова, Е. А.
Veröffentlicht: (2017)
Decrease in the damage of powerful turbogenerator stator caused by vibration in the end zones (analysis, hypotheses, experiment)
von: Shumilov, Yu. A., et al.
Veröffentlicht: (2014)
von: Shumilov, Yu. A., et al.
Veröffentlicht: (2014)
Methodical Aspects of the Conceptual Design of Automated Systems
von: Samokhvalov, Yu. Ya., et al.
Veröffentlicht: (2012)
von: Samokhvalov, Yu. Ya., et al.
Veröffentlicht: (2012)
NUMERICAL-FIELD ANALYSIS OF THE CHARACTERISTICS OF A THREE-PHASE MAGNETIC FIELD INDUCTOR FOR THE TREATMENT OF VARIOUS SUBSTANCES WITH CURRENT STABILIZATION
von: Milykh, V. I., et al.
Veröffentlicht: (2019)
von: Milykh, V. I., et al.
Veröffentlicht: (2019)
3D-MODELING FOR DETERMINATION OF AXIAL FORCES ACTING IN ELEMENTS OF THE END ZONE OF POWER TURBOGENERATORS
von: Gaydenko, Y. A., et al.
Veröffentlicht: (2013)
von: Gaydenko, Y. A., et al.
Veröffentlicht: (2013)
Development of software for automated generation of geospatial GeoTIFF data of hydroacoustic echograms for the module of the oceanographic data bank of the National Academy of Sciences of Ukraine
von: Shundel, Oleksiy, et al.
Veröffentlicht: (2025)
von: Shundel, Oleksiy, et al.
Veröffentlicht: (2025)
INFLUENCE OF MANUFACTURING QUALITY OF LAMINATED CORE ON A TURBOGENERATOR EXPLOITATION TERM
von: Shevchenko, V. V.
Veröffentlicht: (2016)
von: Shevchenko, V. V.
Veröffentlicht: (2016)
TURBOGENERATOR ROTOR HEATING IN PRESENCE OF ROTOR WINDING DEFECTS AND EXCITATION CURRENT FORCING
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2020)
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2020)
Analysis of the Status and Functional Requirements for Modern Engineering Solutions to Create Automated Systems for Personnel Management
von: Khramova, I. О.
Veröffentlicht: (2012)
von: Khramova, I. О.
Veröffentlicht: (2012)
Improving the security of critical infrastructures through automated organizational management systems
von: Додонов, О. Г., et al.
Veröffentlicht: (2022)
von: Додонов, О. Г., et al.
Veröffentlicht: (2022)
Improvement of turbogenerators as a technical basis for ensuring the energy independence of Ukraine
von: Shevchenko, V. V., et al.
Veröffentlicht: (2021)
von: Shevchenko, V. V., et al.
Veröffentlicht: (2021)
From the idea to the creation of an automated interpretation system of potential fields GMT-AUTO: step by step
von: Makarenko, I.B., et al.
Veröffentlicht: (2025)
von: Makarenko, I.B., et al.
Veröffentlicht: (2025)
Automated water level monitoring system in open water
von: Lepikh, Ya. I., et al.
Veröffentlicht: (2019)
von: Lepikh, Ya. I., et al.
Veröffentlicht: (2019)
An automated scenario generation system for analytical activities.
von: Dodonov, O. G., et al.
Veröffentlicht: (2019)
von: Dodonov, O. G., et al.
Veröffentlicht: (2019)
Automation of measurements of the rate of thin films chemical etching
von: Іваницький, В. П., et al.
Veröffentlicht: (2024)
von: Іваницький, В. П., et al.
Veröffentlicht: (2024)
Ähnliche Einträge
-
AUTOMATED FORMATION OF CALCULATION MODELS OF TURBOGENERATORS FOR SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2015) -
DETERMINATION OF ELECTROMAGNETIC PARAMETERS AND PHASE RELATIONS IN TURBO-GENERATORS BY THE AUTOMATED CALCULATION OF THE MAGNETIC FIELD IN THE SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2016) -
A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016) -
ANALYSIS OF THE VARIABLE COMPONENT OF MAGNETIC FIELD ON THE ROTATING ROTOR SURFACE OF A TURBOGENERATOR.
von: Milykh, V. I., et al.
Veröffentlicht: (2013) -
СИСТЕМА АВТОМАТИЗОВАНОГО ФОРМУВАННЯ РОЗРАХУНКОВИХ МОДЕЛЕЙ ЕЛЕКТРИЧНИХ МАШИН ДЛЯ ПРОГРАМНОГО СЕРЕДОВИЩА FEMM
von: Мілих, В.І.
Veröffentlicht: (2022)